549009 - Heated blanket PRINCESS - Free user manual and instructions

Product type	Electric blanket
Brand	Princess
Model	549009
Dimensions (L x W)	180 x 130 cm
Weight	1.5 kg
Power	120 W
Voltage	220-240 V ~ 50/60 Hz
Number of heat levels	6 settings
Preheating function	Yes, quick
Automatic shut-off	Yes, after 3 hours
Overheat protection	Yes
Control	Wired with control box
Material	Soft microfleece
Machine washable	Yes (disconnect the cord)
Washing temperature	30°C maximum
Drying	Air dry, do not tumble dry
Cable length	2.2 m
Usage	For one person
Protection rating	IPX4 (splash resistant)
Included accessories	User manual, control box

Frequently Asked Questions - 549009 PRINCESS

How to wash my Princess 549009 electric blanket?

Before washing, always unplug the power cord by removing the connector. Machine wash at 30°C maximum, gentle cycle. Do not use bleach or fabric softener. Air dry, do not tumble dry or iron.

Can I leave the electric blanket on all night?

It is not recommended to leave the blanket on unattended. The device has an automatic shut-off after 3 hours for your safety. For overnight use, use the preheating function and then turn it off.

What are the dimensions of the blanket?

The blanket measures 180 cm in length and 130 cm in width, making it perfect for one person on a single bed or as an extra layer.

How to adjust the temperature?

Use the control box to select from 6 heat levels (usually 1 to 6). Level 6 is the hottest. An indicator light shows power and the selected level.

Can the blanket be used by children?

This product is designed for adults. Do not use by children under 3 years old. Children aged 3 to 8 can use it under adult supervision, but the control must be out of their reach.

What if the blanket does not heat?

First check that the electrical outlet works and the cord is properly connected to the blanket. If the indicator does not light up, contact customer service. Never attempt to repair it yourself.

Does the blanket have overheat protection?

Yes, model 549009 includes overheat protection that automatically cuts off power in case of abnormal temperature, ensuring safe use.

Can I use the blanket with a pet?

No, it is not recommended to use the electric blanket with pets. Claws or bites could damage the heating wires and pose a risk.

How to store the blanket in summer?

Store the blanket in a dry, cool place, folded without crushing the folds. Avoid placing heavy objects on it. Do not fold it while it is still warm.

Is the blanket compatible with a waterbed or electric mattress?

No, never use the blanket on a waterbed, electric mattress, or heating pad, as this could cause overheating or a short circuit.

USER MANUAL 549009 PRINCESS

Line drawing of a small object with a coiled cable and a connector (no text or symbols)

Gefeliciteerd!

You have purchased a KooZzzi product. Our aim is to provide quality products with a tasteful design and at an affordable price. We hope that you will enjoy this product for many years.

Description (fig. A)

Your 549009 KooZzzi electric feet warmer has been designed for soothing and relaxing your body. The feet warmer is equipped with a thermal protection system that regulates the heat and prevents the feet warmer from becoming too hot. The feet warmer is suitable for indoor use only. The feet warmer is suitable for domestic use only.

1. Electronic control unit
2. Heat control switch
3. Display
4. Feet warmer
5. Sock

Initial use

Before you proceed, we need you to pay attention to the following notes:

- Make sure that there is sufficient space around the feet warmer to allow heat to escape and provide sufficient ventilation.

Clean the sock. Refer to the section • "Cleaning and maintenance".

Note: If you switch on the feet warmer for the first time, it may emit a characteristic smell for a short period. This is normal operation.

Use (fig. A)

Before you proceed, we need you to pay attention to the following notes:

• Before inserting the mains plug into the wall socket, always set the heat control switch to position '0'.
• Do not use the feet warmer with a higher temperature than required.

• Do not use the feet warmer without the sock. Put the sock into the feet warmer. The temperature of the feet warmer without the sock can be too high for the skin.

• Do not leave the feet warmer unattended during use.

• If you wear shoes, take them off before putting your feet into the feet warmer.

Put the sock (5) into the feet warmer (4). Insert the mains plug into the wall socket. Put the your feet into the feet warmer (4). Set the heat control switch (2) to position '3'. The feet warmer (4) starts to heat up. The temperature setting is shown on the display (3).

Note: Regularly check the temperature of the feet warmer on the back of your hand. If the temperature feels warm on your hand, it might well be too hot for the surface of your skin.

Wait for approximately 15 minutes until the feet warmer (4) has reached the set temperature.

Set the heat control switch (2) to the required position:

• Set the heat control switch (2) to position '1' for a low temperature. The temperature setting is shown on the display (3).
• Set the heat control switch (2) to position '2' for a medium temperature. The temperature setting is shown on the display (3).
• Set the heat control switch (2) to position '3' for a high temperature. The temperature setting is shown on the display (3).

If the temperature becomes too high, set a lower temperature using the heat control switch (2).

To switch off the feet warmer, set the heat control switch (2) to position '0'.

Note: The feet warmer switches off automatically after approximately 90 minutes. To switch on the feet warmer again, set the heat control switch to position '0', wait for 5 seconds and set the heat control switch back to the required position.

After use, switch off the feet warmer, remove the mains plug from the wall socket and wait until the feet warmer has cooled down.

Cleaning and maintenance (fig. A)

Before you proceed, we need you to pay attention to the following notes:

• Before cleaning or maintenance, switch off the feet warmer, remove the mains plug from the wall socket and wait until the feet warmer has cooled down.
• Do not immerse the feet warmer or the electronic control unit in water or any other liquids.
• Do not clean the feet warmer.
• Do not clean the electronic control unit.
• Do not use aggressive or abrasive cleaning agents to clean the sock.
• Do not use bleach to clean the sock.
• Do not iron the feet warmer.

Clean the sock in the washing machine • (max. 30 °C). Dry the sock in the tumble dryer at a low temperature or allow the sock to dry naturally.

After cleaning, put the feet warmer with the sock and the electronic control unit in the original packaging.

Store the packaging in a dry and frost-free • place, out of the reach of children.

Safety instructions

General safety

Read the manual carefully before use. · Keep the manual for future reference.

Only use the appliance and the accessories • for their intended purposes. Do not use the appliance and the accessories for other purposes than described in the manual. Do not use the appliance if any part or any • accessory is damaged or defective. If a part or an accessory is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.

Children should be supervised to ensure that they do not play with the appliance.

The use of this appliance by children or persons with a physical, sensory, mental or motorial disability, or lack of experience and knowledge can give cause to hazards.

Persons responsible for their safety should give explicit instructions or supervise the use of the appliance.

The appliance must not be used by infants, • helpless people or people who are insensitive to heat.

The appliance must not be used by young children unless the controls have been preset by a parent or a guardian, or unless the child has been adequately instructed on how to safely operate the controls.

Do not use the appliance near bathtubs, • showers, basins or other vessels containing water.

Do not immerse the feet warmer in water or other liquids. If the feet warmer is immersed in water or other liquids, do not remove it with your hands. Immediately remove the mains plug from the wall socket. If the feet warmer is immersed in water or other liquids, do not use it again.

Do not immerse the electronic control unit in water or other liquids. If the electronic control unit is immersed in water or other liquids, do not remove it with your hands. Immediately remove the mains plug from the wall socket. If the electronic control unit is immersed in water or other liquids, do not use it again.

Electrical safety

Before use, always check that the mains voltage is the same as the voltage on the rating plate of the appliance.

The appliance is not intended to be operated by means of an external timer or separate remote-control system.

Make sure that water cannot enter the contact plugs of the mains cable.

Always fully unwind the mains cable.

Make sure that the mains cable does not • hang over the edge of a worktop and cannot be caught accidentally or tripped over.

- Keep the mains cable away from heat, oil and sharp edges.

- Do not use the appliance if the mains cable or the mains plug is damaged or defective. If the mains cable or the mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.

- Do not pull the mains cable to disconnect the mains plug from the mains.

Disconnect the mains plug from the mains • when the appliance is not in use, before assembly or disassembly and before cleaning and maintenance.

Safety instructions for electric feet warmers

Do not use the feet warmer outdoors.

Do not use the feet warmer for medical • purposes. The feet warmer is not suitable for use in hospitals, doctor's surgeries, etc.

Do not use the feet warmer for warming • animals.

Do not use the feet warmer in humid • surroundings.

Keep the feet warmer away from heat • sources.

Make sure that the feet warmer does not come into contact with flammable material.

Make sure that there is sufficient space · around the feet warmer to allow heat to escape and provide sufficient ventilation.

If you are unable to feel heat or cold, do not use the feet warmer.

If you have diabetes or another condition that causes poor blood circulation, consult with your health care provider before use.

If you have a pacemaker, consult with your health care provider before use.

Make sure that you do not fall asleep · during use.

Do not use the feet warmer if your feet are wet.

Only use the feet warmer with the supplied electronic control unit.

Only use the feet warmer when it is unfolded.

Do not use the feet warmer when it is folded, crumpled or otherwise deformed.

Do not use the feet warmer if it is wet.

Do not insert foreign objects into the feet • warmer.

Do not puncture the feet warmer with sharp objects.

Do not place large or heavy objects on the feet warmer or on the electronic control unit.

Do not leave the feet warmer unattended • when the mains plug is connected to the mains.

- Regularly check the feet warmer for signs of wear or damage. If the feet warmer shows signs of wear or damage or if it has been misused, return it to the supplier before further use.

Before storing the feet warmer, allow it to cool down completely. Store the feet warmer in the original packaging when not in use. Store the feet warmer in a dry and frost-free place, out of the reach of children.

U.K. Wiring instructions

The wires in the mains lead are coloured in accordance with the following code:

BLUE NEUTRAL

BROWN LIVE

As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.

If a 13Amp (BS1363) plug is used, a 13Amp (BS1362) fuse must be fitted, or if any other type of plug is used, a 13Amp fuse must be fitted, either in the plug or adaptor, or on the distribution board.

This is a double-insulated appliance and does not need an earth connection.

Warning! On no account should either the live or neutral wires be connected to the earth terminal.

Disclaimer

Subject to change; specifications can be changed without further notice.

Félicitations!