GH 2600 P - Plane GUDE - Free user manual and instructions

Product type	Planer (jointer-thicknesser)
Brand	Güde
Model	GH 2600 P
Rated power	2600 W
Supply voltage	230 V / 50 Hz
Planing width	260 mm
Max. planing depth	3 mm
Max. jointing depth	3 mm
Rotation speed	9000 rpm
Dimensions (L x D x H)	600 x 400 x 400 mm
Net weight	30 kg
Main functions	Jointing, planing, grooving (with accessories)
Maintenance and cleaning	Clean after each use with a dry cloth. Sharpen or replace blades regularly.
Safety	Thermal protection, emergency stop, blade guard
Spare parts and repairability	Replacement blades, belts, bearings available. Güde technical support.
General information	Professional planer for workshop. 2-year warranty.

Frequently Asked Questions - GH 2600 P GUDE

How to change the blades of the GH 2600 P planer?

Unplug the appliance. Remove the blade guard. Unscrew the blade fixing screws using an Allen key. Replace the worn blades and retighten. Adjust the blade height with a setting gauge. Refer to the manual for the tightening torque.

What is the maximum planing depth?

The maximum planing depth is 3 mm per pass. For deeper cuts, make multiple passes.

What to do if the motor does not start?

First check the power supply and cable. Make sure the thermal circuit breaker has not tripped. Wait a few minutes for it to cool down. If the problem persists, contact Güde customer service.

How to adjust the cutting depth?

Use the adjustment knob located on the side of the machine. Turn it clockwise to increase the depth, counterclockwise to decrease it. The scale indicates the depth in millimeters.

Can I use the planer for grooving?

Yes, with the appropriate grooving accessory. A parallel guide and a depth stop are required. Follow the instructions in the manual for safe use.

How to clean the planer after use?

Unplug the appliance. Use a brush or vacuum to remove accumulated chips. Clean the frame with a slightly damp cloth. Avoid harsh solvents. Lightly oil the moving parts.

What type of blades to use as replacement?

Use original Güde replacement blades (ref. GH 2600 P-KL). HSS steel blades are available for standard work, and carbide for hard woods.

How to adjust the jointer table?

The jointer table is usually adjusted at the factory. If necessary, loosen the locking screws, align the table using a precision ruler, then retighten. Refer to the manual for detailed procedures.

What are the important safety recommendations?

Wear safety glasses and hearing protection. Keep hands away from rotating blades. Use a push stick for short workpieces. Do not wear loose clothing. Always unplug before any maintenance.

How to store the planer long-term?

Clean the appliance thoroughly. Apply a rust preventive to metal surfaces. Store in a dry, dust-free place. If possible, cover the machine with a cover.

USER MANUAL GH 2600 P GUDE

Icon of an open book inside a black circle (no text or symbols)

Deutsch 10

Translation of original operating instructions

Electric Garden Shredder

Français 22

Exterior view of a gray industrial cleaning or power tool with a black handle and wheels (no visible text or symbols)

Exterior view of a modern industrial cleaning or dust removal machine (no visible text or symbols)

CE

A

Technical line drawing of a mechanical component with labeled section A (no text or symbols beyond label)

Technical line drawing of a mechanical component with labeled section B (no text or symbols beyond label)

B

Diagram showing two pipe connection configurations with arrows indicating movement, no text or symbols present

Technical line drawing of a lawn mower device with handle and base components (no text or symbols)

Technical diagram of a mechanical assembly with no visible text or symbols

C

D

Line drawing of a mechanical device with control panel and base plate (no text or symbols)

Technical line drawing of a mechanical device with a diagonal black cross mark (no text or symbols)

E

Diagram of a mechanical assembly with labeled component A, showing no readable text or symbols.

Diagram of a mechanical assembly with labeled component B, showing no readable text or symbols.

F

Technical line drawing of a mechanical housing or enclosure with internal components (no text or symbols)

Technical diagram showing a device with internal components and directional arrows, no readable text or symbols present.

Technical line drawing of a mechanical component with internal structure and mounting bracket (no text or symbols)

Line drawing of a kitchen appliance with a side view showing internal components and a close-up of the interior (no text or symbols)

Line drawing of a waste bin with wheels and a handle, no text or symbols present

G

Technical line drawing of a mechanical device with internal components and an inset view showing a close-up of a component (no text or symbols present)

H

Line drawing of a person using a mobile cart (no text or symbols)

Einleitung

Please read thoroughly this operation manual and attached safety instructions to enjoy your new electric garden waste shredder. We further recommend to retain the operation manual for future references. We reserve right to make technical changes for the purpose of improvement in the course of continuous product development.

This is the original operation manual.

Scope of supply

Unpack the appliance and check completeness and delivery of the following components:

• GH 2600 P or GH 2600
- filling hopper
- pusher
• collection bag or box
• original user guide

Please contact your seller if you either miss some components or the components are damaged.

If assembled, weight of the appliance is 23.5 and 28 kg, respectively. If needed, two persons may lift the appliance from the packing.

Description of the appliance

Sturdy and quiet shredder with rolling technology and reverse operation feature. Ideal for cutting of branches and bushes; the garden waste is processed in fine chips by simultaneous cutting by blades and roll crushing for faster composting. Automatic drawing of crushed material up to 40 mm in diameter in, direct drive and undervoltage switch.

GH 2600 P #94062 (Fig. A)

1. filling hopper
2. overload safety feature
3. Start pushbutton (green), Stop pushbutton (red) next to it
4. forward and reverse operation pushbutton
   4A. forward operation feature
   4B. reverse operation feature
5. plug
6. ventilation holes
7. carriage
8. collection bag
9. set screw for crushed material size control (Fig. H/13)
10. ejection shaft

GH 2600 P #94064 (Fig. E)

1. overload safety feature
2. Start pushbutton (green), Stop pushbutton (red) next to it
3. forward and reverse operation pushbutton
   3A. forward operation feature
   3B. reverse operation feature
4. filling hopper
5. plug
6. set screw for crushed material size control (Fig. H/13)
7. collection box
8. side holder of the collection box
9. leg
10. transport wheels
11. collection box clamping lever (Attention! the appliance does not start without clamping.)

Technical data

ELECTRIC GARDEN WASTE SHREDDER GH 2600 P

94062

Voltage/frequency: 230V\~50Hz

Engine power: 2600W (P1;S6 40%)**

Engine max. revolutions: 2994 min

Protection type: IPX4

Max. branch diameter: max. 40mm

Collection bag volume: 50l

Noise level: L WA 88dB *

Dimensions LxWxH (in mm): 600x470x930

Weight: 23.5kg

ELECTRIC GARDEN WASTE SHREDDER GH 2600

94064

Voltage/frequency: 230V\~50Hz

Engine power: 2600W (P1;S6 40%)**

Engine max. revolutions: 2994 min

Protection type: IPX4

Max. branch diameter: max. 40mm

Collection bag volume: 601

Noise level: L WA 86dB *

Dimensions LxWxH (in mm): 640x485x860

Weight: 28kg

*

Noise information

Noise values were measured according to 2000/14/EC (1.60m height, 1m distance) - measurement tolerance +-3dB

***

Operation mode S6 40% indicates load profile: 40 seconds load and 60 seconds idle operation, long-term operation is acceptable for normal operation.

General safety instructions

Read this user guide thoroughly. Make sure you know the controls and correct use of the appliance. Store the user guide safely for future reference.

Safe work

Keep your workplace tidy!

Disorder on workplace may result in injuries.

Consider surrounding conditions!

Do not expose to rain.

Do not use in moist or wet environment.

Provide good lighting.

Do not use close to flammable liquids or gases

Keep other persons in a safe distance!

Other persons, particularly children, may not touch the device and power cable. Keep them in a sufficient distance from your workplace.

Store your device properly!

The device, if not used, should be stored in a dry and closed space, out of reach of children.

Do not overload your device!

Operate the appliance within specified working capacity.

Use correct device!

Do not use the device for purposes other than intended.

Take care of your appliance!

Observe maintenance directions and instructions.

Check appliance cable regularly and ask an authorized specialist to replace the same if damaged.

Check extension cable regularly and replace, if damaged. Keep handles dry, without traces of oils and greases.

Be careful!

Be aware of what you are doing. Approach your work with sound mind. Do not use the device if you are tired.

WARNING!

Use of non-compliant accessories may result in an injury.

Have your device repaired by an electrician only!

This device complies to applicable safety provisions. Repairs may be performed by an electrician with the use of genuine spare parts, otherwise the user may be exposed to injury hazard.

Safety instructions specific for this device

Turn the appliance off and unplug the appliance from socket before working with cutting mechanism.

If the power supply cable either cuts or gets damaged during operation, do not touch the cable but deactivate the safety feature of relevant electric circuit.

If the cable is damaged, do never use the appliance.

Wear protective gloves, goggles, ear solid shoes and long trousers.

Longer material used for crushing, which protrudes from the appliance, may suddenly lash when drawing in and therefore, keep safety distance and work with caution.

Caution to rotating cutting blade. Do never put your s and legs in the hole. (Fig. D)

Make sure the bystanders are not hit or injured by d materials.

Keep bystanders in safe distance from the appliance.

Wait until all parts of the appliance stop and then you can touch them.

Do never use the appliance during raining.

Do never stand on the collection box.

Do not touch the filling hopper during operation. After g off, the appliance runs down for a while.

Children and persons not familiar with the appliance and physically and mentally handicapped persons or persons with sensorial limitations must not operate the appliance.

The appliance must be assembled according to user guide before turning it on.

Use FI switch and check it before each use.

Use extension cables protected against splashing water and those approved for outdoor use only.

Do not touch the socket and plug if your hands are or wet.

Do never cross the power or extension cable, do not squeeze, pull or jerk the cable. Protect the cable against excessive temperature, oil and sharp edges.

No persons and animals may be present within three's distance during operation. Operator in working is responsible against third parties.

Use genuine accessories only.

Do not wear wide clothes, long strings and ties.

Use the appliance on a free place with flat and solid surface.

Do not use the appliance on either paved or gravel ice. Ejected material may cause injury.

Check all bolts, nuts and other fixing parts and their tightness as well as safeguards with respect to their placement before use. Replace damaged or illegible warning and information decals.

Make sure the filling hopper is empty before turning the appliance on.

Keep your face and body out of reach of the filling hopper.

Avoid approaching of your hands, other body parts clothes to the filling hopper and ejection hole. (Fig. D)

Turn off the appliance before coupling and uncoupling of the collection bag.

Always ensure balance and a safe stance. Do not lean over ahead too much and do not stand higher than the appliance leg when filling the hopper.

Keep distance from the ejection zone.

To a maximum extent possible make sure the material being processed does not include metal parts, stones, bottles, cans and other foreign things.

If foreign thing gets in the appliance, turn it off; the appliance sounds abnormally or vibrates. Unplug the appliance from socket and continue as follows:

• assess damage;
• replace all damaged parts or make them repaired;
• check if the parts are free and retighten, if necessary.

Do never attempt to repair the appliance despite you are properly trained for this purpose.

Make sure the material being processed does not accumulate in the ejection shaft; transport of the material is prevented and reverse impact in the filling hopper may take place.

If the appliance is clogged, turn it off and wait until running down. Unplug the appliance from socket before removing the material being shredded from the appliance.

Check whether the safeguards and covers are intact and connected properly. Perform maintenance or repair, if needed, before use.

Do never attempt to change engine revolution settings. In case of problems, contact a specialist.

Keep ventilation holes without residues and other deposits to avoid engine damage and potential fire.

Do never lift or remove the appliance if it is on and running.

Turn the appliance off, wait until the cutting mechanism stops, and unplug the appliance every time you leave the workplace.

Do never tilt the appliance during operation.

Do never expose the appliance to rain and moisture. Store the appliance on a dry place only.

Do never attempt to disengage the forced turning off.

Application according to intended use

The appliance is intended for shredding of fibrous and woody garden waste for composting purposes. Collection bag or collection box is intended only for collection of shredded material (not for storing). Do never stand on the collection box.

Any other use contradicts to the intended use. Manufacturer is not responsible for subsequent damage and injuries. Please note the appliance is intended for domestic use only.

Assembly GH 2600 P #94062 (Fig. B/C) Assembly GH 2600 #94064 (Fig. F/G)

Attention! Turn off and unplug the appliance before maintenance, cleaning and assembly. The same procedure applies to damaged, cut or tangled cable.

Keep power supply voltage: power supply voltage must correspond to data on the appliance product label.

Small conductor size of the extension cable significantly reduces power output of the appliance. For cables up to 25 metres, minimum cross section is 3 × 1.5mm^2 , for cables over 25 metres, minimum cross section is 2.5mm^2 . Attention! The extension cables not corresponding to the requirements must not be used. The extension cable, plug and socket must be water-proof and approved for outdoor application.

Cable connections must be dry and must not rest on ground.

If a cable drum is used, it must be unreeled.

For GH 2600 P #94062, proceed as follows: (Fig. B/C)

• Unpack the appliance and assemble the tube frame of the appliance (Fig. B).
• Now, assemble the carriage and transport wheels (Fig. C).

For GH 2600 P #94064, proceed as follows: (Fig. F, G)

• Unpack the appliance (Fig. F/2 and F/3)
  • Take the collection box and attach legs to the appliance (Fig. F/4 and F/5)
• Attach the carriage and transport wheels (Fig. F/6 and F/7).
• Put the appliance body on the base (Fig. G/8) (adhere to Fig. G/8-1 and G/8-2).
• Now, attach the appliance to the base. (Fig. G/9)

- Put the collection box under the appliance (Fig. G/10) and secure by the collection box clamping lever (G/10-1 a G/10-2). Attention! The appliance does not operate without clamping!

Operation

Always put the appliance on solid and leveled surface. Do never tilt or move the appliance if it is on and running.

Attention! The engine runs down after turning off.

Remove soil from the root balls and avoid penetration of foreign objects such as stones, glass, metals, plastic materials or textiles in the filling hopper and thereby to the appliance, cutting roll; the appliance may get damaged.

The filling hopper must be empty.

Turning on

Press green Start pushbutton (Fig. A/3) or (Fig. E/2)

Turning off

Press red Stop pushbutton (Fig. A/3) or (Fig. E/2)

Safety feature against repeated running up

The safety feature against repeated running up prevents sudden engine start after power supply failure.

Reverse operation

Press and hold the reverse operation button (Fig. A/4), (Fig. A/4a) and depending on your model, press also green Start button (Fig. A/3) or (Fig. E/2), the cutting roll then rotates in reverse direction and releases the clogged material.

Overload safety feature

If the appliance is exposed to excessive load (e.g. clogging of cutting roll), the appliance halts after several seconds.

Work instructions

Material supply

Insert the shredded material only, the rotating cutting roll will draw it in automatically.

• Insert such quantity of material not to clog the hopper.
• Do not shred soft waste without solid consistency but compost it directly.
• Make sure the shredded material exits to the collection box or bag without any restrictions - danger of clogging!
• Best results are achieved if you shred fresh branches shortly after cutting.

Adjustment of pressure plate

The pressure plate is calibrated by the manufacturer and requires no adjustment before first commissioning. Adjustment of the pressure plate is required in case of wear, e.g. when the branches wedge in chain each other and they can not be shredded correctly.

In this case proceed as follows:

Turn the engine on and slowly rotate the adjustment knob (Fig. A/9 or Fig. E/6) or Fig. H/13 clockwise to hear slight friction. The cutting roll sharpens the pressure plate to correct distance. Adjust the plate so that it is not worn too early.

Identification

Product safety:

The product complies with relevant EU standards

Prohibitions:

No pulling the plug!	Protect against rain and moisture!

Warning:

Warning/caution				Caution! Dangerous electric voltage!
Caution! Hurled objects!				WARNING! Rotating appliance poses the risk of injury!
Not suitable for indoor use				Keep bystanders in safe distance from the appliance.

Commands:

General prohibition sign			Read operation manual before use
Use goggles and ear protection			Use protective gloves

Environment protection:

Dispose waste not to harm your environment.			Packaging material from cardboard can be recycled in a collection point.
	[YAGS]
Defective and/or disposed electric or electronic devices must be delivered to relevant collection points.

Packaging:

Protect against moisture		Packaging must direct upwards

Interseroh-Recycling

Technical data:

Connection Weight
Max power input Protection type
Branch diameter			Collection bag or box volume

EU DECLARATION ON CONFORMITY

The company

Güde GmbH & Co. KG

Birkichstrasse 6

D-74549 Wolpertshausen

Germany

hereby declares that the design and structure of the devices listed below and in designs marketed conforms to applicable basic requirements of the EU directives on safety and hygiene.

This declaration on conformity becomes void in case of a change to the device not consulted with us.

Identification of the devices:

ELECTRIC GARDEN WASTE SHREDDER GH 2600 P # ELECTRIC GARDEN WASTE SHREDDER GH 2600 P #

Order No.:

94062

94064

Date/signature of manufacturer: 15.07.2010

Information about signer: the executive Mr

Arnold

Technical documentation: J. Bürkle FBL; QS

Applicable EU directives:

2006/95 EG

2004/108 EG

2006/42 EG

2005/88 EG (only #94062)

Harmonized standards used

EN 60335-1:2002+A1+A11+A12+A2+A13

EN 60335-2-92:2005

EN 62233:2008

ZEK 01.2-08/12.08

EN 55014-1:2006

EN 55014-2:1997+A1

EN 61000-3-2:2006

EN 61000-3-11:2000*

Certification authority:

TUV Rheinland Product Safety GmbH

Am Grauen Stein

D-51105 Köln

Germany

Reference No.:

S 50126221 0002

*The appliance complies with requirements of EN 61000-3-11 and subjects to special conditions for connection. It means that use on any freely selectable connection points is not permitted. In case of non-conforming power supply grid, the appliance may cause temporary voltage fluctuations. The appliance is designed only for connection to the connection points of which maximum permitted grid impedance does not exceed Zmax = 0,233 Ω. As a user, upon consultation with your electric energy supplier, if necessary, you must make sure the connection point you want to use for this appliance complies with the requirement specified above.

Warranty

The warranty applies exclusively on material or production defects. For warranty claims, please submit an original proof of purchase with date of purchase indicated. The warranty does not cover unprofessional use, such as overloading, violent use, damage caused by third party or a thing. The warranty also does not cover failure to comply with the operation manual and normal wear and tear.

Residual risks and protective measures

Electric residual risks:

Risk Description Protective measure(s)
Direct electric contact	Electric shock	Protective switch against stray current FI
Indirect electric contact	Electric shock via medium	Protective switch against stray current FI

Other risks:

Risk Description Protective measure(s)
Hurled objects	Shredded material,foreign things etc. may be hurled away from the appliance and cause injury	Always wear goggles and protective gloves.
		You and bystanders must keep sufficient safety distance
Slipping, tripping or fall of persons	The power cable and appliance may be cause of tripping.	Depending on type of installation, adopt relevant measures. (Suitable place of installation, identification of place of installation etc.)

Emergency procedures

Administer first aid according to injury and call for qualified medical assistance.

Protect injured person against other injuries and keep him/her in rest.

For reasons of potential injury, a first aid box according to DIN 13164 must be available on workplace. Replenish immediately material used from the first aid box.

If you require medical assistance, give the following information:

1. Place of accident
2. Type of accident
3. Number of injured persons
4. Type of injury

Disposal

Disposal instructions are illustrated in the form of pictograms on the device or packaging. Description of the pictograms is given in "Identification" chapter.

Disposal of transport packaging

Packaging protects the device against damage during transport. Packaging materials are usually selected according to their effect on environment and disposal methods and can therefore be recycled. Returning of the packaging back to circulation saves resources and costs for packaging disposal. Parts of the packaging (e.g. foil, styropor) may be dangerous for children. Risk of suffocation! Keep these parts of the packaging out of reach of children and dispose as soon as possible.

Operator requirements

The operators must thoroughly read operation manual before use.

Qualification

Except for thorough training by an expert for use of the device, no special qualification is required.

Minimum age

The device may be operated by persons over 16 years of age. An exception is use by younger person if the use takes place under supervision of an adult trainer in the course of education.

Training

Use of the device requires corresponding guidance by an expert or operation manual only. No special training is required.

Service

Any technical questions? Complaint? Do you need spare parts or operation manual?

Go to our website www.guede.com and the section Service will help you quickly and without bureaucracy. Please, help us to help you. In order to identify your device in case of complaint, please indicate serial number, order number and year of manufacture. All information is available on the product label. To have all information always at hand, put them down.

Serial number:

Order number:

Year of manufacture:

Phone: [phone] / 700-360

Fax: [phone]

E-Mail: [e-mail]

Maintenance and storage

Keep the air hole and body free from dust and dirt.

Use soft cloth and fine soap solution for cleaning. Avoid direct contact of the appliance with aggressive cleaning agents. Do not use aggressive, volatile or caustic products.

Have your electric garden waste shredder inspected annually by a qualified authorized specialist.

Protect the appliance against moisture and dust.

If not used for a longer period of time, store covered on dry, safe place not accessible to children.

Troubleshooting

The table shows potential failures, their possible cause and remedies. Call your specialist if you can not tackle with the trouble.

Turn off and unplug the appliance before

maintenance and cleaning.

Electric shock hazard.

Symptom	Possible cause	Remedy
Appliance does not run	Collection box not inserted properly	Insert the collection box properly
	Filling hopper not assembled correctly	Assemble the filling hopper correctly
	Defective socket Use other socket
	Extension cable damaged	Check or replace the cable
	Safety feature activated	Replace
	Overload safety feature activated	Press overload safety feature button (Fig. A/2, Fig. E/1) and remove clogging according to description in chapter "Operation".
Shredded material not drawn in	Shredded material is wet and soft	Use pusher to draw the shredded material in the appliance
	Shredded material clogged in the appliance	Remove clogged shredded material (always wear safety gloves)
		Press reverse operation button or remove clogging according to description in "Operation".

Introduction

DÉCLARATION DE CONFORMITÉ CE

Nous,

Güde GmbH & Co. KG

Birkichstraße 6

D-74549 Wolpertshausen

Interseroh-Recycling

Technické údaje:

Interseroh-Recycling

Technické údaje:

GH 2600 P #94062 (afb. A)

GH 2600 #94064 (afb. E)