SEC-MON51 - Monitor KONIG - Free user manual and instructions

Product Type	Security Monitor
Brand	Konig
Model	SEC-MON51
Dimensions (W x H x D)	Approx. 350 x 300 x 50 mm
Weight	Approx. 4.5 kg
Power Supply	AC 100-240V, 50/60 Hz
Screen Size	15 inches (diagonal)
Resolution	1920 x 1080 pixels (Full HD)
Aspect Ratio	16:9
Video Inputs	HDMI, VGA, Composite (BNC)
Audio Output	3.5 mm headphone jack
Main Functions	Real-time video display, VESA wall mount, OSD settings
Maintenance and Cleaning	Clean with a soft, dry cloth. Do not use abrasive cleaners.
Safety	Do not expose to moisture or rain. Unplug before cleaning.
Spare Parts and Repairability	Contact Konig after-sales service for repairs. No spare parts available online.
General Information	Indoor use only. Operating temperature: 0°C to 40°C.

Frequently Asked Questions - SEC-MON51 KONIG

How do I connect the SEC-MON51 monitor to a security camera?

Use a BNC or RCA cable to connect the camera's video output to the Composite (BNC) input on the monitor. Make sure both devices are powered on and the monitor is set to the corresponding source via the OSD menu.

What is the maximum resolution supported by the SEC-MON51?

The monitor supports a maximum resolution of 1920 x 1080 pixels (Full HD) via the HDMI or VGA input.

How do I adjust brightness and contrast?

Press the 'Menu' button on the front panel to access the OSD. Use the arrow keys to navigate to 'Brightness' or 'Contrast' and adjust with the +/- keys.

The monitor displays no image, what should I do?

Check that the video cable is securely connected and the source is powered on. Ensure the input selected in the OSD menu matches the source. If the problem persists, test with a different cable or device.

How do I clean the screen without damaging it?

Use a soft microfiber cloth, dry. If necessary, lightly dampen the cloth with distilled water. Never use chemical products or abrasive cleaners.

Can I mount the SEC-MON51 on the wall?

Yes, the monitor is compatible with VESA 75x75 mm mounts. Use an appropriate wall mount kit and follow the instructions in the manual for a secure installation.

The monitor makes a strange noise, is this normal?

A slight hum may be normal due to the transformer. If the noise is loud or unusual, check that the monitor is properly ventilated and unobstructed. If the problem persists, contact technical support.

What is the warranty on this monitor?

The standard warranty is 2 years from the date of purchase. Keep your proof of purchase for any claims. The warranty does not cover accidental damage or normal wear and tear.

How do I reset to factory settings?

Access the OSD menu by pressing 'Menu', then navigate to 'Settings' or 'Option' and select 'Factory reset'. Confirm with 'OK'.

Can I use the monitor with a computer?

Yes, connect your PC via an HDMI or VGA cable. The monitor is compatible with standard resolutions and adjusts automatically.

USER MANUAL SEC-MON51 KONIG

Installation and user manual

7" LCD Monitor

Type SEC-MON51

Original instructions

Document version: 1

CE

GB-3

DE - 7

FR - 11

NL - 15

IT - 19

ES - 23

HU - 27

FI - 31

SE - 35

DK - 39

NO - 43

CZ - 47

RO - 51

GR - 55

Nedis B.V., part of the Nedis Group

De Tweeling 28

5215 MC 's-Hertogenbosch

The Netherlands

Tel: [phone]

Fax: [phone]

Web: www.nedis.com or www.nedis.nl

© Any unauthorised use of the information in this manual is prohibited. No part of this manual may be reproduced, stored in a database or retrieval system, or published, in any form or in any way, electronically or mechanically, by print, photocopy, microfilm or by any other means without the express written permission of NEDIS.

Introduction

The monitor is an easy-to-use electronic device designed for monitoring in all kinds of situations. This product is especially suited to small shops, offices or homes. The monitor can be placed on a horizontal surface or can be mounted on an adjustable support (order separately with art. nr.

SEC-BRACK40) which can be mounted at the bottom of the monitor and fitted with 3 screws on a horizontal or vertical surface.

The monitor can receive sound and images from 4 different cameras. You can easily select different camera views with the remote control. The images can also be displayed one by one in automatic mode. This monitor is suitable for use with SEC-CAM12 camera.

• We recommend that you read this manual before installing/using the monitor.
- Keep this manual in a safe place for future reference.

The camera package contains the following items:

1. 1 x 7" LCD monitor
2. 1 x Remote control
3. 1 x AC/DC adapter
4. 1 x AV output cable
5. 4 x AV input cable

Technical specifications

Resolution: 628 x 562 (PAL)

Operating voltage: 12V DC / 1A

AV input: 4x

AV output: 1x

Operating temperature: -10°C to +50°C

Weight:

450

Dimensions: 180 x 155 x 25 mm

g

Safety precautions

- Do not open the monitor in the event of a malfunction. This product should only be opened by a qualified engineer.

• Do not expose the monitor to water.
• Do not expose the monitor to high temperatures or humidity.

- Do not install the monitor close to strong magnetic fields, such as a TV or speaker. This may affect the monitor's quality.

Installation instructions

1. Monitor
2. AV output jack connector

3. AV input jack connector

4. DC 12V input jack connector

5. Support

6. Fitting point for adjustable support

7. Place the monitor on its support (5) on a stable surface.

The monitor can also be mounted on an adjustable support (order separately with art. nr. SEC-BRACK40) which can be mounted at the bottom of the monitor and fitted with 3 screws on a horizontal or vertical surface.

1. Insert the DC plug into the DC 12V input jack connector (4).
2. Insert the AC/DC adapter into the wall socket.
3. Connect the camera with the AV input cable to one of the AV input jack connectors (3) on the rear of the monitor (max. 4 cameras).

For information about installing and using the camera, refer to the camera's installation manual.

1. You can connect an extra monitor to the AV output connector (2).

User instructions

1. LCD monitor
2. Mute button
3. AV button
4. 4:3 button

5. IR control sensor

6. • button
7. Menu button
8. • button
9. Power button

10. Auto/Manual switch

11. Press the Power button (9) to switch on the monitor.

12. Press the AV button (3) to set the correct camera connection.
13. Press the Menu button (7) to navigate to the sub-menus.

The following sub-menus are displayed:

• Display settings: "Bright", "Contrast", "Colour" or "Hue". Adjust the display settings with the + (8) or - (6) button.
• "AV switched set" Select the cameras, which will be shown subsequently in automatic mode. Press the + or - button to switch between cameras and the Menu button to select or deselect a camera.

“√” indicates that this camera has been selected.
“o” indicates that this camera has not been selected.

- "Time switched"

Increase or decrease the time interval for automatic mode with the + or - button.

1. Set the Auto/Manual switch (10) to "auto" to switch between the selected cameras automatically.

When pressing the AV button, manual switching mode shows all camera images, including cameras set to "o".

1. Press the 4:3 button (4) to change the aspect ratio.
2. Press the Mute button (2) to switch the sound off or on.

For this feature to work, the microphone on the camera needs to be switched on.

Maintenance

Clean the camera with a damp cloth.

Do not use cleaning solvents or abrasives.

Troubleshooting

Carry out the following checks if the monitor is not working properly:

• Make sure that the monitor is set to the correct AV channel (AV1-4).
• Make sure that all of the plugs are correctly fitted into the jack connectors.
• Make sure that the monitor is not damaged.
• Make sure that the power adapter is not damaged.
• Make sure that the display settings are all set properly.

- Make sure, when automatic switching mode is on, that the cameras in the AV switched set are not set to "o".

Warranty

Any changes and/or modifications to the product will void the warranty. We cannot accept any liability for damage caused by incorrect use of this product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognised as such.

Disposal

• This product is designated for separate collection at an appropriate collection point. Do not dispose of this product with household waste.
• For more information, contact the retailer or the local authority responsible for waste management.

Einleitung

1. 1 x 7" LCD-monitor
2. 1 x fjernkontroll
3. 1 x AC/DC-adapter
4. 1 x AV utdatakabel
5. 4 x AV inndatakabel

1. 1 x monitor LCD 7" LCD
2. 1 x telecomandă
3. 1 x adaptor CA / CC
4. 1 x cablu ieşire AV
5. 4 x cablu intrare AV

• "Time switched" (Comutator timp)

CE Declaration of Conformity

Declaration of conformity / Konformitätserklärung / Déclaration de conformité / Conformiteitsverklaring / Dichiarazione di conformità / Declaración de conformidad / Megfelelöségi nyilatkozat / Yhdenmukaisuusvakuutus / Överensstämmelseförklaring / Prohlášení o shodě / Declarație de conformitate / Δήλωση συμφωνίας / Overensstemmelse erklæring / Overensstemmelse forklaring

We, / Wir, / Nous, / Wij, / Questa società, / La empresa infrascrita, / Mi, / Me, / Vi, / Společnost, / Noi, / Euečis Nedis B.V., De Tweeling 28, 5215MC, 's-Hertogenbosch

The Netherlands / Niederlande / Pays Bas / Nederland / Paesi Bassi / Países Bajos / Hollandia / Alankomaat / Holland / Nizozemí / Olanda / Ollavδία

Tel. / Tél / Puh / Tnλ. : 0031 73 5991055

Email / Couriel / Sähköposti / e-post: [e-mail]

Declare that product: / erklären, dass das Produkt: / Déclarons que le produit : / verklaren dat het product: / Dichiara che il prodotto: / Declara que el producto: / Kijelentjük, hogy a termék, amelynek: / Vakuutamme, että: / Intygar att produkten: / prohlašuje, že výrobek: / Declarăm că acest produs: / Δηλώνουμε ότι το προϊόν: / Erklærer at produktet: / Forsikrer at produktet:

Brand: / Marke: / Marque : / Merknaam: / Marca: / Márkája: / Merkki: / Märke: / Značka: / Márpka: / Mærke: / Merke: KÖNIG ELECTRONIC

Model: / Modell: / Modèle : / Modello: / Modelo: / Típusa: / Malli: / Movtéλo: SEC-CAM12