KN-AMP80UK - TV signal amplifier KONIG - Free user manual and instructions
Find the device manual for free KN-AMP80UK KONIG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | TV Signal Amplifier |
| Brand | Konig |
| Model | KN-AMP80UK |
| Frequency Range | 5–862 MHz (VHF/UHF) |
| Gain | Approx. 20 dB |
| Number of Outputs | 1 output |
| Input/Output Connection | Coaxial F-Type (75 Ohm) |
| Power Supply | DC 12V via mains adapter (included) |
| Power Consumption | 2 W (typical) |
| Dimensions (W x H x D) | Approx. 90 x 75 x 30 mm |
| Weight | Approx. 180 g |
| Color | Black |
| Housing Material | Plastic |
| Mounting | Wall-mountable with screws (not included) |
| Operating Temperature | 0°C to 40°C |
| Signal Amplification | Compensates for cable losses and splitter losses |
| Compatibility | Works with DVB-T/DVB-T2, DVB-C and analog TV signals |
| LED Indicator | Power LED for operation status |
| Installation | Connect between antenna and TV |
| Maintenance | Wipe with a dry, soft cloth; do not use solvents |
| Safety | For indoor use only; keep away from moisture |
| Spare Parts / Repairability | No user-replaceable parts; contact qualified service |
| Included Items | Amplifier, power adapter, instruction manual |
Frequently Asked Questions - KN-AMP80UK KONIG
How do I install the KN-AMP80UK TV signal amplifier?
Connect the antenna cable to the amplifier’s input, then connect a cable from the output to your TV. Plug in the power adapter and the LED will light up.
Does this amplifier support DVB-T2 signals?
Yes, the KN-AMP80UK works with DVB-T/DVB-T2, DVB-C as well as analog TV signals across 5–862 MHz.
What is the gain of the Konig KN-AMP80UK?
It provides approximately 20 dB gain, which compensates for signal loss caused by long cables or passive splitters.
Can I use this amplifier for cable TV (DVB-C)?
Yes, the amplifier passes DVB-C frequencies, so it can be used in cable TV installations to boost the signal level.
Does the amplifier need a separate power supply?
Yes, it is powered via the included DC 12V adapter. The power consumption is typically 2 W.
How can I connect multiple TVs to one antenna with this amplifier?
The KN-AMP80UK has a single output. To feed multiple TVs, connect a signal splitter to the output and then run cables to each TV.
I see no picture after connecting. What should I check?
Verify the power adapter is connected and the LED is on. Check all F-type connectors are tight, and make sure the TV is set to the correct input and channel scan mode.
Can I install this TV amplifier outdoors?
No, the KN-AMP80UK is designed for indoor use only. Protect it from moisture by placing it inside or in a waterproof enclosure.
Is it compatible with 4K/Ultra HD TV broadcasts?
The amplifier passes the entire VHF/UHF band used by TV signals, including those carrying HEVC (H.265) 4K broadcasts, so it will not affect picture quality.
How should I clean and maintain the device?
Disconnect the power and wipe the housing with a dry, soft cloth. Avoid using water, solvents, or abrasive cleaners. No internal maintenance is required.
User questions about KN-AMP80UK KONIG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV signal amplifier in PDF format for free! Find your manual KN-AMP80UK - KONIG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KN-AMP80UK by KONIG.
USER MANUAL KN-AMP80UK KONIG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KONIG
Model : KN-AMP80UK
Category : TV signal amplifier