HR2067 - Blender PHILIPS - Free user manual and instructions

Product Type	Blender
Brand	Philips
Model	HR2067
Motor Power	400 W
Voltage	220-240 V
Frequency	50/60 Hz
Jar Capacity	1.5 L
Jar Material	Glass
Blade Material	Stainless steel
Number of Speeds	2
Pulse Function	Yes
Ice Crush	Yes
Dimensions (W x D x H)	Approx. 18 x 18 x 38 cm
Weight	Approx. 2.5 kg
Cord Length	1.0 m
Detachable Blade Unit	Yes
Dishwasher Safe Parts	Removable parts
Non-slip Feet	Yes
Safety Lock	Lid lock
Overload Protection	Automatic shut-off
Spare Parts Availability	Jar, blade unit, lid

Frequently Asked Questions - HR2067 PHILIPS

What is the capacity of the Philips HR2067 blender?

The blender has a 1.5 liter glass jar, suitable for making smoothies, soups, and sauces for the whole family.

Can I crush ice with this blender?

Yes, the Philips HR2067 is equipped with stainless steel blades and a pulse function that allows you to crush ice easily.

Is the jar dishwasher safe?

The glass jar and removable parts are dishwasher safe for easy cleaning.

How do I clean the blade unit?

Detach the blade unit and rinse under running water. Do not immerse the motor base in water. Use a brush for stubborn residues.

What does the safety lock feature do?

The blender will not operate unless the lid is securely locked, preventing accidents.

Can I blend hot liquids?

It is not recommended to blend hot liquids directly. Allow them to cool to room temperature before blending to avoid pressure buildup.

How many speeds does the HR2067 have?

It has 2 speed settings plus a pulse function for precise control.

What should I do if the blender stops working?

Check if the overload protection has activated. Let the motor cool down for 15 minutes, then press the reset button if available.

Where can I find replacement parts?

Replacement jars, blade units, and lids are available through Philips service centers or authorized retailers.

Is the Philips HR2067 suitable for making baby food?

Yes, it can puree fruits and vegetables to a smooth consistency suitable for baby food.

USER MANUAL HR2067 PHILIPS

Two Philips blender models shown side by side, one black and one white, with control knobs and a 1500 ml volume indicator (no text or symbols on the devices themselves)

HR2067/66/64/61

HR2074

HR2066

ENGLISH 6

БЪЛГАРСКИ 14

ČEŠTINA 23

EESTI 31

HRVATSKI 39

MAGYAR 47

ҚАЗАҚША 55

LIETUVIŠKAI 64

LATVIEŠU 72

POLSKI 80

ROMÂNĂ 89

РУССКИЙ 97

SLOVENSKY 106

SLOVENŠČINA 114

SRPSKI 122

УКРАЇНСЬКА 130

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

The appliance is equipped with a built-in safety system that prevents the appliance from functioning if the accessories have been assembled incorrectly or have not been assembled at all.

General description (Fig. 1)

A Motor unit with control knob
B Pulse setting
© Speed settings
D Ice button

Blender with plastic jar (HR2067/HR2066/HR2064/HR2061 only):

E Measuring cup
F Fruit filter (HR2067/HR2066/HR2064 only)
G Opening in lid
H Lid of plastic blender jar
I Plastic blender jar
J Level indication
K Blender blade unit

Blender with glass jar (HR2074 only):

L Measuring cup
M Opening in lid
N Lid of glass blender jar
Fruit filter
P Glass blender jar
Q Level indication
R Blender blade unit

Mill (HR2067/HR2061 only):

S Mill beaker
T Mill blade unit

Citrus press (HR2066 only):

U Cone
V Sieve
W Juice jug
☒ Detachable gear unit

Important

Read this user manual carefully before you use the appliance and save it for future reference.

General

Danger

- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Use only a moist cloth to clean the motor unit.

Warning

- Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.

• If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
• Do not use the appliance if the plug, the mains cord or other parts are damaged.
• Never use the blender jar, mill beaker (specific types only) or juice jug (specific types only) to switch the appliance on and off.
• Never let the appliance run unattended.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or metal capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not touch the blades, especially when the appliance is plugged in. The blades are very sharp.
• Always unplug the appliance before you assemble, disassemble or make adjustments to any of the parts.
• Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
• Do not exceed the top level indication on the blender jar, the mill beaker (specific types only) and the juice jug (specific types only).
• Do not exceed the maximum quantities and processing times indicated in the relevant table.

Caution

Blender

Warning

• Never reach into the blender jar with your fingers or an object while the appliance is running.
• Make sure the blade unit is securely fastened to the blender jar before you assemble the blender jar onto the motor unit.
• Do not touch the cutting edges of the blender blade unit when you clean it. They are very sharp and you could easily cut your fingers on them.
• If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades.

Caution

• Never fill the blender jar with ingredients hotter than 80^ C.
• To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when you process at a high speed. Do not put more than 1 litre in the blender jar when you process hot liquids or ingredients that tend to foam.
• If food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use a spatula to remove the food from the wall.
• Always make sure the lid is properly closed/assembled on the jar and the measuring cup is inserted properly in the lid before you switch on the appliance.
• HR2074 only: The jar is made of glass and therefore breakable. Do not drop the jar on a hard floor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water before pouring hot liquid into it. If the glass jar cracks, stop using it.

Mill (HR2067/HR2061 only)

Warning

• Make sure the blade unit is securely fastened to the mill beaker before you assemble the mill beaker onto the motor unit.
• Do not touch the cutting edges of the mill blade unit when you clean it. They are very sharp and you could easily cut your fingers on them.
• Never use the mill to grind very hard ingredients such as nutmeg and ice cubes.

ENGLISH8

Caution

• Never use the mill for more than 30 seconds without interruption. Let the mill cool down to room temperature between processing cycles.
• Always process cloves, star anise and aniseed together with other ingredients. If processed separately, these ingredients may attack the plastic materials of the appliance.
• The mill beaker may become discoloured when you use the mill to process ingredients such as cloves, anise and cinnamon.
• The mill is not suitable for chopping raw meat. Use the blender instead.
• Do not use the mill to process liquids such as fruit juice.
• Noise level: Lc = 90 dB [A]

Filter (all types except HR2061)

Caution

• Never use the filter to process ingredients hotter than 80°C.
• Never overload the filter. Do not fill the filter beyond its metal part.
• Always make sure the lid is closed/assembled properly and the measuring cup is inserted properly in the lid before you switch on the appliance.
• Cut fruit into smaller pieces before you put it in the filter.
• Soak dried ingredients, such as soy beans, before you put them in the filter.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Built-in safety lock

This feature ensures that you can only switch on the appliance if you have properly assembled the blender jar, mill beaker or juice jug on the motor unit. If the blender jar, mill beaker or juice jug is correctly assembled, the built-in safety lock will be unlocked.

Before first use

Thoroughly clean the parts that will come in contact with food before you use the appliance for the first time (see chapter ‘Cleaning’).

Using the appliance

Blender

The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.

Preparing the blender for use

1 Screw the blender blade unit anticlockwise onto the blender jar (Fig. 2).
2 Mount the blender jar with the blade unit attached to it onto the motor unit and turn it clockwise until it locks into position (Fig. 3).
3 Put the ingredients in the blender jar.
Let hot ingredients cool down before putting them into the blender jar (max. temperature 80^ C/175°F).
4 HR2074 only: fasten the lid on the jar by pressing it down (1) and turning it clockwise (2). (Fig. 4)

5 HR2067/HR2066/HR2064/HR2061 only: close the lid.
6 Insert the measuring cup into the lid (Fig. 5).
7 To disassemble the blender, follow the instructions above in reverse order.

Using the blender

1 Put the mains plug in the wall socket.
2 Turn the control knob to the required speed setting or press the ice button (Fig. 6).

See the blender table at the end of this user manual for the recommended quantities, speed settings and processing times.

Never reach into the jar with your fingers or an object (e.g. a spatula) while the blender is running.

Do not let the appliance run for more than 3 minutes at a time. If you have not finished processing after 3 minutes, switch the appliance off for one minute before you let it run again.

3 Turn the control knob to the pulse setting several times if you want to process ingredients very briefly.

Never use the pulse setting longer than a few seconds at a time.

4 Always switch the appliance off by setting the control knob to 0 before you open the lid.

Tips

• To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when you are processing at a high speed. Do not put more than 1 litre in the blender jar when you are processing hot liquids or ingredients that tend to foam.
• You can use the opening in the lid to add ingredients while the motor is running (Fig. 7).
• Do not process dry ingredients for more than 1 minute.
• Cut solid ingredients into smaller pieces before putting them in the blender jar. Do not process a large quantity of solid ingredients at the same time. Process these ingredients in a series of small batches instead.
• If you are not satisfied with the result when blending solid ingredients, switch the blender off and use the pulse setting a few times to let the blender run briefly. You can also stir the ingredients with a spatula (not while the blender is running!) or remove some of the contents of the jar and process smaller amounts.
• To crush ice cubes put max. 5 cubes at a time in the jar and press the ice button a few times.

HR2074 only: The jar is made of glass and therefore breakable. Do not drop the jar on a hard floor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water before pouring hot liquid into it. If the glass jar cracks, stop using it.

Filter (HR2074/HR2067/HR2066/HR2064 only)

HR2061: You can order the filter from your Philips dealer.

You can use the filter to obtain extra finely blended sauces, fresh fruit juices or cocktails. All pips and skins will be caught in the filter.

Never fill the filter beyond its metal part.

Do not use the filter to process hot ingredients.

Preparing the filter for use

1 Put the filter in the blender jar (Fig. 8).

Make sure the filter is properly fitted onto the bottom of the jar.

ENGLISH10

The grooves of the filter and the ribs inside the blender jar will help you put the filter in the right position.

2 HR2067/HR2066/HR2064 only: close the lid.
3 HR2074 only: put the lid on the blender jar to fix the filter in its proper position. Fasten the lid on the jar by pressing it down and turning it (Fig. 9).

Make sure that the sieve in the lid is positioned in front of the spout of the jar to be able to pour out liquids.

Using the filter

1 Put the ingredients in the filter through the opening in the lid.
Cut fruits into smaller pieces and soak dried pulses, such as soy beans, before processing them in the filter.
2 Add water or another liquid.
3 Put the measuring cup in the lid, set the control knob to the highest speed and let the appliance run for max. 40 seconds.
4 Switch the appliance off. Pour out the drink through the spout of the blender jar (Fig. 10).

Make sure the lid is closed and the measuring cup is in the lid. This prevents pulp and skins from ending up in your drink.

5 For optimal results, put the jar with the remaining ingredients back onto the appliance, without opening the lid, and let it run for a few more seconds.
6 Pour out the rest of the drink.

Tips

• Particularly when you are processing large quantities, we advise you not to put all the ingredients in the filter at the same time. Start processing a small quantity, let the appliance run for a moment, switch it off and then add another small quantity.
• To get the best result when making fruit juices and cocktails, add approx. 300ml water (or another liquid if you are making e.g. cocktails) to 150g fruit.
• To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the lid onto the rotating blades.

Mill (HR2067/HR2061 only)

The mill can be used for grinding and chopping ingredients such as peppercorns, sesame seeds, rice, wheat, coconut flesh, nuts (shelled), coffee beans, soy beans, dried peas, cheese, breadcrumbs, etc.

Always process cloves, star anise and aniseed together with other ingredients. If processed separately, these ingredients may attack the plastic materials of the appliance.

The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.

Do not exceed the maximum level indicated on the mill beaker.

Preparing the mill for use

1 Put the ingredients in the mill beaker (Fig. 11).
Note: See the mill table for the recommended quantities and processing times.
2 Screw the mill blade unit clockwise onto the mill beaker (Fig. 12).
3 Turn the assembled mill upside down and screw it clockwise onto the motor unit (Fig. 13).

Using the mill

1 We advise you to use the pulse setting or speed setting 5.

Never let the mill run for more than 30 seconds without interruption.

Citrus press (HR2066 only)

Preparing the citrus press for use

1 Put the gear unit of the citrus press in the bottom of juice jug (1) and turn it clockwise until it snaps into position (2) (Fig. 14).
2 Place the sieve in the juice jug. Push it down (1) and turn it clockwise until it snaps into position (2) (Fig. 15).
3 Place the cone onto the driving shaft in the centre of the sieve (Fig. 16).
4 Assemble the citrus press onto the motor unit by turning it clockwise until it locks into position. (Fig. 17)

Using the citrus press

1 First set the control knob to speed 1 and then press the citrus fruit onto the cone.
2 Stop pressing from time to time to remove the pulp from the sieve.
Do not exceed the level indication on the juice jug.

3 When you have finished pressing or when you want to remove pulp, switch the appliance off and remove the juice jug with the sieve and cone on it by turning it anticlockwise.
4 To disassemble the citrus press, remove it from the motor unit by turning it anticlockwise. Then remove the cone, the sieve and the gear unit.

Cleaning

Always unplug the appliance before cleaning it.

Tips:

• Cleaning the appliance and its parts is easiest immediately after use.
• If necessary, the mesh of the filter may be cleaned with a very soft brush.
• Always disassemble all removable parts before cleaning them.

Do not use abrasives, scourers, alcohol, etc.

See the cleaning table for further instructions.

Quick-cleaning the blender jar

1 Fill the blender halfway with warm water and add a few drops of washing-up liquid.
2 Turn the control knob to the pulse setting a few times.
3 Detach the blender jar, empty it and rinse it under the tap.

Storage

- Store the mains cord by winding it round the reel in the bottom of the appliance (Fig. 18).

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 19).

Guarantee & service

If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Recipes

Soy milk (HR2074/HR2067/HR2066/HR2064 only)

Ingredients:

1 Soak the soy beans for 4 hours before processing them.
2 Pour the soaked soy beans and the water in the filter. Blend for 24 seconds at the highest speed setting.

Do not process more than 1 batch without interruption. Let the appliance cool down to room temperature before continue processing.

3 Bring the soy milk to the boil in a pan, then add sugar and leave to simmer.

Ice-blended vanilla coffee

Ingredients:

• 150ml warm water
• 1.5 tbsp sugar
• 2 tbsp instant coffee
• 200g vanilla ice cream
• 10 ice cubes

1 Dissolve the coffee and sugar in water. Pour all ingredients (except the ice cubes) into the blender.
2 Blend until you have obtained a smooth substance.
3 Drop the ice cubes through the opening in the lid while the motor is running.

Kiwi-strawberry smoothie

Ingredients:

• 200g peeled kiwi, cut in pieces of 3x3x3 cm
• 100g banana, cut into 1-cm slices, frozen
• 150ml pineapple juice
• 100g frozen strawberries

1 The strawberries should be used straight from the freezer.
2 Put the ingredients in the blender jar in the order mentioned above and blend until you have obtained a smooth substance.

Note: Tip: in order to gain an even thicker consistency you can also freeze the bananas.

Frequently asked questions

If the appliance does not work or does not work properly, first check the list below. If the problem is not mentioned in this list, the appliance probably has a defect. In that case we advise you to take the appliance to your dealer or to an authorised Philips service centre.

Question Answer
Why doesn't the appliance work?	This appliance is equipped with a safety system. The appliance will not work if the accessories have not been assembled properly onto the motor unit or have not been assembled at all. Check whether the accessories have been assembled properly (see the various sections in these instructions for use). Switch off the appliance first!
Can I clean all removable parts in the dishwasher?	Yes, except the motor unit and the gear unit of the citrus press.
What does ‘pulse’ mean?	When you turn the control knob to the pulse setting, the appliance will run at its highest speed as long as you keep the knob in this position. Using the pulse setting is recommended if you want to have more control over the processing jobs.
Can I pour boiling hot liquids into the blender jar?	No, let hot liquids cool down to 80 °C/175 °F to avoid damaging the jar.
Why does the motor produce an unpleasant smell during processing?	It is very common for a new appliance to give off an unpleasant smell or emit some smoke the first few times it is used. This phenomenon will stop after you have used the appliance a number of times. The appliance may also give off an unpleasant smell or emit some smoke if it has been used too long. In this case you have to switch the appliance off and let it cool down for 60 minutes.
The appliance stopped running because the blade unit is blocked. What should I do?	Switch the appliance off and use a spatula to dislodge the ingredients that are blocking the blade unit. We also recommend processing a smaller quantity.
Why does the fruit juice or soy milk contain a lot of pulp or skins?	To prevent pulp and skins from ending up in your drink, make sure that the filter (HR2074/HR2067/HR2066/HR2064 only) has been properly placed in the jar, the lid is in place/closed and the measuring cup has been inserted into the lid.
The blender jar leaks. What should I do?	Switch the appliance off and pour out the ingredients. Check if the blade unit is assembled correctly.

y_BOA

	1	<500g	90 sec.
	2	<750ml	60 - 90 sec.
	3	<1000ml	60 - 120 sec.
	4	<1000ml	30 - 60 sec.
	5	<750ml	60 - 90 sec.
		5x	5 - 6 pulses

	5 - 25g	30 sec.
	25 - 75g	30 sec.
	25 - 75g	30 sec.
	25 - 50g	30 sec.
	25 - 75g	10 sec.
	20 - 40g	10 sec.