B50C211TCS - Television BLAUPUNKT - Free user manual and instructions

Product Type	LED TV 50" (127 cm)
Brand	Blaupunkt
Model	B50C211TCS
Approximate dimensions (without stand)	112 x 65 x 8 cm
Weight	More than 20 kg (transport by two people recommended)
Power Supply	220-240 V~, 50/60 Hz
Estimated Power Consumption	Approximately 100 W
Screen Resolution	Full HD (1920 x 1080 pixels)
TV Reception	DVB-T, DVB-C, DVB-S (depending on model)
Connections	4 x HDMI, 1 x VGA, 1 x USB, 1 x SCART, 1 x RF, 1 x coaxial audio output, component input, composite video input, CI, headphone output
3D Function	Yes (3D glasses provided on some models)
USB Recording (PVR)	Yes (pause, scheduled recording from TV guide)
TV Guide	7 days
Ecohome Economy Mode	Yes (15% reduction in consumption)
Built-in Speakers	2 x 10 W
Safety	Do not open (risk of electric shock); do not expose to moisture; do not place flammable objects nearby
Screen Maintenance	Soft damp cloth (pure water, no detergent)
Repairability	No user-serviceable parts; contact an authorized service center
Supplied Accessories	Remote control, AAA batteries, stand, RF cable, installation kit, user manual

Frequently Asked Questions - B50C211TCS BLAUPUNKT

How to perform the first setup?

Connect the TV and antenna, turn it on, insert the batteries into the remote control. Press the Standby button. The initial setup screen appears. Follow the on-screen instructions to select the language, country, signal type (DVB-T/C/S) and start the automatic channel search.

How to connect an external device (DVD player, game console)?

Use the HDMI, VGA or component inputs according to your device. Press the SOURCE button on the remote control, select the corresponding input and confirm with OK.

How to use the USB recording function?

Plug in a USB key (read 20 MB/s, write 6 MB/s min). In digital mode, press REC to record the current program. You can also schedule a recording from the TV guide (TV GUIDE button then green button).

What to do if I do not receive a TV signal?

Check the antenna connection and power supply. Restart an automatic channel search via Menu > Channel > Auto tuning. If the problem persists, contact your access provider for DVB-C settings or check the satellite antenna orientation.

How to clean the TV screen?

Use a soft damp cloth with clean water. Never use detergent or solvent. Wipe gently without pressing.

How to reset the TV to factory settings?

Go to Menu > Settings > Restore factory settings. Confirm with OK. The default password is 0000.

How to activate 3D mode?

Press the 3D button on the remote control (yellow). Choose the appropriate format (Side by Side, Top Bottom, etc.) according to the content. 3D glasses may be required (provided on some models).

How to use teletext?

Press the TEXT button on the remote control. Use the numeric keys to enter a page number, the color keys for functions (red, green, yellow, blue). Press EXIT to exit.

How to enable control via HDMI CEC?

In Menu > Settings > HDMI CEC, enable the option. Make sure the connected device also supports the CEC standard. You can then use the TV remote control to control the device.

How to update the TV software?

Download the latest firmware from the Blaupunkt website onto a USB key. Plug the key into the TV, go to Menu > Settings > Software update (USB) and follow the on-screen instructions.

USER MANUAL B50C211TCS BLAUPUNKT

3D* | DVB-T | DVB-C* | DVB-S2* | USB | PVR* | DVD*

User guide

User guide

EN: for selected models only

▶ I – Play / Pause

USB Multimedia Player

Important safety instructions

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

Please read these safety instructions and respect the following warnings before operating the appliance:

To prevent fire spread, always keep candles and other open flames away from this product.

• This TV weighs more than 20 kg and must be lifted and carried by at least two people.
• Be careful! This TV does not contain any parts that can be repaired by the user. In case of a fault, contact the producer or authorized service. Contact with certain parts inside the appliance might endanger your life. The guarantee is not provided for faults caused by non-professional interactions!
• Do not remove the rear part of the appliance.
• This appliance is designed for receiving and reproducing video and sound signals. Any other use is strictly forbidden.
• The ideal distance to watch TV is approximately five times the diagonal length of the screen. Light from other sources striking the screen can cause reflections and degrade picture quality.
• Ensure adequate ventilation and keep the appliance at a safe distance from other furniture. Install the product at least 5 cm from the wall for ventilation.
• The TV is designed for use in moderate climates.
• The TV is designed exclusively for operation in a dry place. When using the appliance outdoors, ensure it is protected from moisture (rain, splashing water). Never expose the appliance to moisture.
• Do not place containers with water, such as vases, on the appliance. They could be knocked over, posing an electrical safety hazard. Place the appliance only on flat, stable surfaces. Do not place objects like newspapers or blankets on or under the appliance.
• Ensure the appliance does not rest on any power cables, as they could be damaged. Mobile phones and other devices such as WLAN adapters, wireless monitoring cameras, etc., may cause electromagnetic interference and should not be placed near the appliance.
• Do not place the appliance near heating elements or in direct sunlight, as this negatively affects cooling. Heat buildup is dangerous and can significantly reduce the appliance's lifespan. To ensure safety, have a qualified person remove dirt from the appliance.
• Prevent damage to the mains cable or (if included) the mains adapter. The appliance should only be connected using the supplied mains cable/adapter.
• Storms are dangerous for all electrical appliances. If lightning strikes the mains or aerial wiring, the appliance may be damaged even if it is turned off. Therefore, disconnect all cables and connectors from the appliance before a storm.
• To clean the screen, use only a damp, soft cloth. Use only clean water, never detergents or solvents.
• Position the TV close to the wall to reduce the risk of it falling when pushed. The instructions below provide a safer way to set up the TV by securing it to the wall, preventing it from falling forward if pulled. This

will prevent the TV from falling forward and causing injury, and will also prevent damage to the TV.

This method is used if the TV is placed on a glass surface or if you do not wish to screw anything into your furniture.

Ensure that children do not climb or hang onto the TV.

For this type of installation, you will need a fastening cord.

A) Using one/both of the top wall-mounting holes and screws (the screws are already supplied in the wall mounting holes) fasten one end of the fastening chord/s to the TV.

B) Secure the other end of the fastening chord/s to your wall.

• To use this model TV as a PC/laptop monitor it will need to be connected via the VGA input, it cannot be used as a PC/laptop monitor via the HDMI input. The HDMI Input is provided to view digital content with compatible external devices.
• The software on your TV and the OSD layout can be changed without notice.

Warning:

• Never connect any external devices to a live appliance. Switch off not only the TV but also the devices which are being connected! Plug the appliance plug into the wall outlet after connecting the external devices and the aerial!
• Always make sure there is free access to the appliance main switch and to its mains plug.
• The appliance is not designed for a use in a workplace fitted with monitors.
• The systematic use of headphones at high volume might lead to irreversible hearing damage.
• Ensure environmental disposal of this appliance and any components including batteries. When in doubt, please, contact your local authority for details of recycling.
• While installing the appliance, do not forget that furniture surfaces are treated with various varnishes, plastics, etc. or they might be polished. The additions contained in these products might cause destruction of base material of appliance stand. This will result in the holdovers of this material stuck to the furniture surface, which are difficult to remove, if not even impossible.
• The screen of your TV responds to the top quality requirements and it was checked in details for accidental faulty pixels several times. Due to the technological properties of the manufacturing process, it is not possible to eliminate the existence of a small number of faulty points on the screen for 100% (even with maximum care while production provided). These faulty pixels are not considered faults in terms of guarantee conditions, if their extent is not greater than the boundaries defined by DIN norm.

Important information regarding use of video games, computers, captions and other fixed image displays.

• The extended use of fixed image program material can cause a permanent "shadow image" on LCD screen (this is sometimes incorrectly referred to as "burnout to the screen"). This shadow image is then permanently visible on the screen in the background. It is a partly irreversible damage. You can avoid such a damage by respecting the following instructions:
• Reduce the brightness/contrast setting to a minimum viewing level.
• Do not display the fixed image for a long period of time. Avoid displaying:

» Teletext time and charts,

» TV/DVD menu, e.g. DVD contents,

» In the "Pause" mode (hold): Do not use this mode for e.g. while watching a DVD or a video. » Turn off the appliance if you are not using it.

Batteries

- Observe the correct polarity when inserting the batteries.

Cd

- Do not expose batteries to high temperatures and do not place them on locations where the temperature might increase quickly, e.g. near the fire or on the direct sunshine.

- Do not expose batteries to excessive radiant heat, do not throw them into the fire, do not disassemble them and do not try to recharge unrecoverable batteries. They could leak out or explode.

» Never use different batteries together or mix new and old ones.

» Dispose of batteries in an environmentally friendly way.

» Most of the EU countries regulate the disposal of batteries by law.

Disposal

- Do not dispose of this appliance as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve resources and protect the environment. Contact your retailer or local authorities for more information.

3D Safety Information

• If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.
• Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.
• Pregnant women, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.
• Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.
• Please prevent children under the age of 5 from watching 3D TV as it may affect their vision development.

Warning for photosensitization seizure:

- Some viewers may experience a seizure or epilepsy when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV. Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or light headedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV.

Risk of photosensitization seizure can be reduced with the following actions.

• Take frequent breaks from watching 3D TV. - For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures. - Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV. - Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time. - Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV. - Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving.

What is included in the box

Supply of this TV includes following parts:

• 1x TV - 1x Remote control - 2x AAA batteries - 1x User guide - 1x Stand - 1x Stand neck - 1x RF cable - 1x TV stand installation packet • 3D glasses (optional)

Attaching the Stand

Please follow the instructions in the Stand installation leaflet, located in the accessories bag.

Getting started - initial set up

1. Using the RF cable supplied, connect the TV to the TV Aerial wall socket. Connect the power cable to the Electrical outlet.
2. Turn on the device with the marked ON/OFF switch.
3. Insert the batteries supplied into the Remote control and press the Standby button to power on the TV.
4. You will now be welcomed with the initial set-up screen. If it does not appear, on the remote control, please press [MENU] then 8-8-8-8 and the menu will appear. Press OK on the remote control and tuning will start.

As part of our continuing efforts to reduce energy consumption, we added a new Home Mode feature (appears on the first installation screen). This function helps reduce energy consumption up to 15% compared to other modes. The image brightness is reduced using Home Mode. If this setting does not suit your environment, you can choose from other modes (Note: the Store mode is the optimal default mode, but consumes 15% more than the Home Mode).

Please select desired language, country and environment. Set LCN* to ON if you want to arrange found channels by cable provider preferences (only applies to DVB-C channels).

Press [OK] button to start the tuning process.

1. In the next step select the type of digital broadcasting. You can choose between DVB-T (terrestrial), DVB-C (cable) or DVB-S2 (satellite). The analog channel will be searched automatically, as most of the cable network includes analog channels.
2. Select DVB-C if your TV is connected to a cable TV network. Keep all default settings as it is recommended. Then press [OK] to start the search. If DVB-C channels are not found, contact your network provider for the valid "Network ID". Then perform a new search. Press the [MENU], select "Network ID" and enter the network ID. Start your search by clicking [OK].
3. Optional channel presets DVB-S2*: Select "Satellite" in the "Digital-type" in the menu for the optional channel presets. Here you can choose between the various satellites. Since selection completed, then the channel list of the exact satellite will be available to be imported into your TV system. This takes several seconds. Confirm with [OK] button on the remote control, to start scanning.

If you are missing channels, the reason for this is likely to be signal strength, you should consider connecting a signal booster and retuning the TV.

Remote control

STANDBY – Switch on TV when in standby or vice versa. MUTE – Mute the sound or vice versa.

DTV - Switch to digital TV source.

RADIO - TV/RADIO – Switch to Digital and switch between TV and radio in Digital mode.

EN

USB – Switch to USB source.

ATV – Switch to analog TV source.

DVD ¹ – Switch to DVD mode.

0 - 9 – to select a TV channel directly.

TV GUIDE – Opens the 7 Day TV Guide (Digital mode).

– To return to the previous channel viewed.

VOL ▲/▼ – To increase / decrease the sound level.

S.MODE – Scrolls through sound mode options.

P.MODE – Scrolls through picture mode options.

FAV – To display favourites menu.

CH ▲/▼ – To increase or decrease the channel being watched.

(▲/▼/◄/►/OK) – Allows you to navigate the on-screen menus and adjust the system settings to your preference.

MENU – To display OSD menu.

EXIT – To exit all menus.

SOURCE – To display the input/source menu.

INFO – Press once for now/next channel information. Press twice for programme information about the current programme.

ASPECT – To switch the screen between the different picture formats.

SLEEP – Press repeatedly to cycle through the sleep options.

AUDIO – To change the audio language (if available).

SUBTITLE – To switch the dialogue at the bottom of the screen (on/off).

TEXT – Teletext mode – To enter Teletext.

TEXT HOLD – HOLD – Teletext mode – Hold the current page that is displayed.

TEXT/DVD ZOOM – DVD mode – Teletext mode – To zoom in.

ZOOM – DVD mode – Teletext mode – To zoom in.

DISPLAY – To switch off the screen when listening to radio.

DVD MENU¹ – DVD mode – To display the DVD disc menu.

REC² – PVR mode – PVR Record.

DVD SETUP¹ – DVD mode – To display the DVD setup menu.

REC LIST² – PVR mode – Opens the list of recordings.

- To restart the current chapter

▶▶ - To advance forward to the next chapter

■ / ▲ - To stop playback / To eject the disc, press and hold the button for 4 seconds.

- To play in fast rewind mode.

▶▶ – To play in fast forward mode.

▶ - To play/pause

GOTO ¹ - DVD mode - To go to a specific chapter

A-B ¹ – DVD mode - Press once to set point, press a second time to return to point

ANGLE ¹ - DVD mode - Select different angle of DVD (if available)

REPEAT - DVD mode ¹ - USB mode - To repeat playback

REVEAL - Teletext mode - To reveal or hide the hidden words

SIZE - Teletext mode - To change the display size in Teletext mode

TITLE ¹ – To display the DVD disc menu

D. DIS ¹ – To display the current disc information

INDEX - Teletext mode - To display the index page

Red Green Yellow Blue button - Additional teletext and OSD functions

3D button - Switches between 3D type settings

1 - available only for TVs with DVD players

2 - available only with PVR function

3 - Available only for TVs with 3D function

TV buttons & Source menu

▲ Eject *

Play / Pause *

Vol+ Volume up and menu right

Vol- Volume down and menu left

CH+ Programme/Channel up and menu up

CH- Programme/Channel down and menu down

MENU Displays Menu/OSD

SOURCE Displays the input source menu

STANDBY Standby Power On/Off

Choosing Mode Input/Source

To switch between the different input/connections.

a) Using the buttons on the remote control:

1. Press [SOURCE/AV] - The source menu will appear.
2. Press [▼] or [▲] to select the input you require.
3. Press [OK].

b) Using the buttons on the Television:

1. Press [SOURCE]
2. Scroll up / down using CH+/CH- buttons to the input/source you require.
3. Press Vol+ to change input/source to the one selected.

Connections

USBUSB-Input	HDMI 1, 2*, 3*, 4* inHDMI-Input 1, 2*, 3*, 4*
VGA(PC) *VGA PC-Input	VGA (PC) Audio In *3.5mm PC audio input
R/L - Video & YPbPr audio In *Component / Video audio input	Video (CVBS) *VIDEO Input
Mini YPbPr *Mini Component HD Input	YPbPr *Component HD Input
[37X2][37X2]SCART *SCART-Input	[3670]CI Card INSCART input
RF InRF / TV Aerial Input	Sat In *Satellite Input
COAX Audio Out *Digital Coax output	HEADPHONES3.5mm Headphone output

TV Menu navigation

To access this menu, press the [MENU] button on the remote control. To enter a menu, press [OK]. If you wish to make changes to any of the default settings, use the scroll (▲/▼/◄/►) buttons. To confirm any settings, press the [OK] button. To exit this menu at any time, press the [EXIT] button.

Channel

Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations, and analogue channels.

ATV Manual Tuning - Allows you to manually tune your analogue signal. DTV Manual Tuning - Allows you to manually tune your digital signal.

Programme Edit - Allows you to delete, skip, and add favourite channels. Schedule List - Lists your programme reminders.

Signal Information - Information about the DVB signal.

CI Information - Pay-per-view services require a "smartcard" to be inserted into the TV. If you subscribe to a pay-per-view service, the provider will issue you with a 'CAM' and a "smartcard". The CAM can then be inserted into the COMMON INTERFACE PORT (CI Card In).

Dish Setup* - This menu is only available in DVB-S2 mode. You can select the type of satellite, your transponder, and your LNB type, etc.

* - Only for models with DVB-S tuner

Picture

Picture Mode - Choose from the following presets.

• Standard - Default settings
• Dynamic - Recommended settings for fast moving pictures
• Mild - Set to be lighter in colour and less bright
• Personal - Lets you manually alter all the settings
• Home Mode - Consume 15% less energy.

Contrast - Switch the balance between black and white.

Brightness - Increase or decrease the brightness of the picture.

Colour - Increases the colour from black and white.

Tint - Lets you increase or decrease the level of tint within the picture.

Sharpness - Increase or decrease the sharpness of the picture.

Colour Temperature - Choose from the following presets.

• Normal - Default settings
• Warm - Increases red within the picture
• Cold - Increases blue within the picture

Noise Reduction - Choose from the following presets.

Off - Turns noise reduction off - Low- Minor system adjustment - Middle- Medium system adjustments - High - Maximum system adjustments - Default - Default settings

3D Settings *

TIP: For the best 3D picture effect, watch your TV from a vertical angle of +/- 10°.

3D Type - When connecting a 3D product, sometimes the picture may be displayed incorrectly; choose from the following settings to correct this. You can toggle these settings by pressing the '3D' button on your remote.

- 3D off - Turns 3D off

- Side by Side 3D Format - This 3D format is commonly used in 3D broadcasting. It works by halving the horizontal resolution of videos to store left and right eye images in each frame. It effectively displays up to 960 x 1080-pixel pictures to each eye, enabling TV stations to telecast 3D content at a much lower bandwidth compared with 3D Blu-ray discs. Typical supported resolutions are limited to 720p and 1080i for 3D TV programs. Users will need to manually select the correct 3D format to properly display side-by-side 3D content on a 3D TV.

- Top Bottom 3D Format - This 3D format is an alternative for 3D broadcast, which is pretty similar to side-by-side 3D except

that it halves the vertical resolution instead. Available primarily up to 720p resolution, top-and-bottom 3D offers 1,280 pixels horizontally. The higher pixel count is generally considered more suitable for displaying panning motion in sports programs.

- Frame Alternative - As its name suggests, this format stacks the left and right eye images in each frame to retain the content's original resolution for the best 3D pictures. Most, if not all, 1080p 3D Blu-ray movie discs and 720p PS3 3D games are produced utilizing this technique. Another key differentiator is that all 3D TVs should be able to automatically detect frame-packing 3D signals and correctly display the content without user intervention.

- Line by Line - The picture signals for left and right eyes are interleaved in alternate lines. The left clip's resolution is halved then placed in the odd lines of the video stream. Correspondingly, the right clip's resolution is halved then placed in the even lines of the video stream. When combined, the video stream totals 1920×1080.

Exchange 3D L/R - Change picture sequence for different viewing. 2D to 3D - Changes the picture from regular 2 dimensions to 3 (3D). Please note as content is being changed by the TV, the effects are limited. 3D to 2D - Changes the picture from 3D to regular 2 dimensions (2D). 2D to 3D Depth - Depth of pictures converted from 2D to 3D.

* - Only for models with 3D function

Sound

Sound Mode - Choose from the following presets

• Standard - Default settings
• Music - Emphasises music over voices
• Movie - Provides live and full sound for movies
• Personal - Selects your personal sound settings
• Sports - Emphasises sound for sports

Tip: Treble and bass levels can only be adjusted when the sound mode 'Personal' is selected.

Treble - To adjust the level of high frequency within the sound.

Bass - To adjust the level of low frequency within the sound.

Balance - To switch the sound between the left and right speakers.

Auto Volume Level (AVL) - When 'on' is selected, the volume will stay at a constant level regardless of input/source.

Digital Output - This is the digital COAX Audio output. Choose from the following options:

- Off - Auto - Selects the best settings automatically - PCM - Select this option if you are connecting to a Stereo Hi-fi via coax cable (Pulse-code modulation (PCM) is a digital representation of an analogue signal)

AD Switch - Additional sound track for visually impaired. Available only on selected DTV shows.

Time

Clock - Set the date and time. Date and time is set up automatically in DVB mode.

Off Time - Allows you to set a specific time for your TV to turn off.

On Time - Allows you to set a specific time for your TV to turn on, the channel it will then display, the source it will be on and also the volume. This function can then be toggled to repeat every day or a certain day.

Time Zone - Change your current time zone.

Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount of time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min.

Auto standby - Adjustment for the auto standby in hourly increments: Off -> 3h -> 4h -> 5h.

OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen before disappearing.

Lock

System Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password. Use the ◀ button to quit the password input. Use the ▶ button to clear. Default password is 0000.

Set Password - Change the default password.

Channel lock - Lock specific TV channels.

Parental Guidance - Lock TV channels based on age restriction.

Key Lock - Lock the TV buttons.

Setup

Language - Allows you to change the language of the menu.

TT Language - Encoding settings for the proper display of teletext characters.

Audio Languages - Allows you to change audio language on selected DVB channels.

Subtitle Language - Allows you to change subtitles language on selected DVB channels.

Hearing Impaired - If signal provides support for the hearing impaired, the subtitles can be played by pressing the "Subtitle". If you set Hearing Impaired ON and switch to a channel with supports for hearing impaired subtitles will be activated automatically.

• Aspect Ratio - Within the EU the picture form varies depending on the channel/broadcast. There are a number of different options to best meet your needs.
• Auto - Automatically displays the best picture format. So the picture is in the correct position. May have black lines at the top/bottom and/or sides.
• 4:3 - Displays the 4:3 picture in its original size. Side bars are shown to fill the 16:9 screen.
• 16:9 - Fills the screen with a regular 16:9 signal.
• Zoom 1/2 - The picture is the correct proportion but zoomed in to fill the screen. Full Screen - Stretch signal to fill the screen.

Blue Screen - Changes the background when there is no input between transparent and a blue background (Only available on some sources).

First Time Installation - Starts the first time installation.

Reset - This resets the menus to factory settings.

Software Update (USB) - From time to time we may release new firmware to improve the operation of the television (available to download). This menu lets you install the new software/firmware onto the television. Further details of how to do this will be issued with the firmware. Contact the helpline or refer to the 'www.umc-slovakia.sk/products-support/' website.

HDMI CEC - Allows you to operate devices connected via HDMI with TV remote control.

• Auto power - Automatically turn on/off connected devices via HDMI CEC
• Device menu - Allows you to access devices menu and operate the menu using TV remote control.
• HDMI ARC - Sends audio signal from terrestrial/satellite broadcast via HDMI to the AV receiver without using any additional audio cables, this function is available only on HDMI 2 output.

HDMI CEC must be supported by connected device.

PC Settings *

Auto Adjust - Lets you automatically configure the television to be used as a computer monitor.

H Off set - Changes the horizontal position of the picture.

V Off set - Changes the vertical position of the picture.

Size - increase picture size.

Phase - To adjust delay time of phase in order to reduce the noise of picture

Position Reset - Changes back to the original settings

Tip: If the computer is left in-active for a period of time, the television will switch into a 'sleep' state (the screen will power off to save power). To switch back on press the standby button.

Tip: If you do not press any buttons for 10 seconds, the menu will automatically exit. You can change the length of time before the menu exits automatically - see 'OSD Timer' section.

* only for devices with VGA connector

7 Day TV Guide

TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the Digital channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders.

1. Press [TV GUIDE]. The following 7 Day TV Guide will appear.
2. Navigate through the menu using ▲/▼/◄/►.

You can now:

Set a reminder by pressing GREEN.

View a previous day by pressing YELLOW.

View the next day by pressing BLUE. [INFO] shows detailed information about the selected post.

1. Press [EXIT] to exit the 7 day TV Guide.

USB mode / Media player

USB mode offers playback of various different types of content that you have saved on your USB Memory Stick. On switching to USB source the USB mode menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on file type.

1. You can navigate through the menus using the scroll ▲/▼/◄/► buttons. To confirm the item you wish to play/view press [OK] button.
2. Select the drive you require. (If your drive only has 1 partition you will only see 1 item).
3. You can now access the item. Press OK to view.
4. While viewing you may control the item playback modes by using the remote control buttons or by invoking playback navigation menu and selecting on-screen buttons ▲/▼/◄/► and [OK].

USB Record - Digital mode*

Built into this television is a USB record facility. This function is available in Digital mode when used in conjunction with a compatible USB memory stick or USB Hard drive. The benefits of this are as follows:

• Pause live TV and then playback, fast forward and rewind (up to live TV). • One button record, if you decide you want to record the current programme.
• Easy programmable recording from the 7 day TV Guide.
• Record TV and watch back on your computer/laptop. Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads from and writes to the memory stick at the same time, some memory sticks may not be suitable). Minimum Specification - USB Memory Stick

- Read Speed - 20 MB/s (Mega Byte Per Second)

- Write Speed - 6 MB/s (Mega Byte Per Second)

If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this user guide.

Pause Live TV (Time Shift) *

Pausing Live TV is very simple.

• Press the play/pause button and the television will pause and the live content will be recorded. To resume watching press play/pause again.
• Press fast forward to go forward in a recording (i.e. to skip adverts)
• Press fast rewind to go back in a recording (i.e. if you fast forwarded

too far).

TIP: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart time shift you must press play/pause button.

One Button Record

At any point in time you may decide to record the current channel that you are watching. To do this you need to press the [REC] button.

TIP: This television contains one TV tuner, therefore it can only record the channel you are watching or record one channel while the television is in standby mode.

Note: USB record function is only available in Digital TV mode. Due to copyright laws and illegal copying/recording it is not possible to record to/from any other input/output source.

DVD Menu*

To access this menu, press the [D. MENU] button on the remote control. If you wish to make changes to any of the default settings, use the scroll ▲/▼/◄/► buttons. To confirm any settings, press the [OK] button. To exit this menu at any time, press the [EXIT] button.

General Setup Page

TV Display - Choose from the following options: 4:3

- PanScan - PS Traditional picture format, often used on old films

- 4:3 LetterBox - LB Traditional picture which

has been adapted for widescreen

- Wide - Widescreen picture format

OSD Language - Select desired language

Audio Setup Page

Speaker Setup - Choose from the following options:

LT/RT - Set LT/RT Downmix

- Stereo - Set Stereo Downmix

Dolby Digital Page

Dual Mono

- Stereo - Outputs 2 channels of sound both left and right

- Mono L - Outputs left side sound

- Mono R - Outputs right side sound

- Mix Mono - Outputs a single channel of sound but mix between right and left

Dynamic Range - This is the difference between the quietest and loudest sounds. This setting works only with DVD discs recorded in Dolby digital.

Preference Page

TV Type - Choose from the following options

• NTSC - Normally used for discs from North America, Japan etc
• PAL - The standard for discs from UK/Europe, most of Asia, Australia etc
• Multi - For both NTSC and PAL

Default - This option allows you reset all DVD settings to factory settings.

*- only for devices equipped with built in DVD Player

-G./D.-Lt/Rt downmix

- Stereo - Stereo downmix

Dolby D Setting

Dual Mono -

• Lt/Rt - Lt/Rt downmix
• Stereo - Stereo downmix

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

▶ I – Play/Pause

- Ee/Di - Lt/Rt downmix

USB mode / Media player

USB allows displaying various types of content that you have stored on a USB memory. By switching to the USB source, the USB menu will appear. The content will be divided into Photo (photos),

Music (music), Movie (film) and Text (text) depending on the type of document.

1. You can navigate through the menu using the ▲ /▼ /◀/▶ keys. To confirm your selection, press the [OK] button.
2. Select the desired storage device. (If the device contains 1 partition, you will see only 1 item).
3. You can access it by pressing OK.
4. While watching, you can control playback using the remote control or by calling up the navigation menu and selecting the ▲ /▼ / ◀▶ keys and then [OK].

USB recording - Digital mode*

Your TV has a built-in USB recorder. This function is available in digital mode when used with a suitable USB memory or USB hard disk. The advantages of this are:

• Pausing live TV and then watching, rewinding.
• One-button recording, if you wish you can record current programs. • Easy recording scheduling with a 7-day TV guide.
• Recording TV and watching on computer/laptop. Due to the nature of the product, it is necessary to use a high-speed USB memory (since the TV reads and writes to the memory at the same time, some USB memories are not acceptable).

Minimum specifications - USB Memory

• Read speed - 20 MB/s (Mega Bytes Per Second)
• Write speed - 6 MB/s (Mega Bytes Per Second)

ATV- Switch to analog TV source.

DVD ¹ – switch to DVD.

USB recording – Media player

* - Only on supported devices

TV menu

USB / Media player mode