ISB46 - Pregnant iLive - Free user manual and instructions

USER MANUAL ISB46 iLive

- Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not install and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ADDITIONAL WARNINGS

• WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recyc or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.

International Support

To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:

www.iLiveElectronics.com

For Warranty Information and the most up-to-date version of this User's Guide, go to: www.iLiveElectronics.com.

Made Green

Protect for Today Sustain for Tomorrow

Specifications are subject to change without notice.

Copyright © 2016 Digital Products International (DPI, Inc.)

All other trademarks appearing herein are the property of their respective owners.

Exterior view of a modern cylindrical device with a reflective dome and reflective surface, labeled 'iJUVE' (no other text or symbols visible)

Portable Color Changing Wireless Speaker

User's Guide for Model ISB46-1551-01

Features / Includes

• Bluetoothwireless
• Wireless range: 60 ft
• Aux In
• Light effects
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium ion battery
• Battery life - approx. 3 hrs
• Micro-USB charging cable

Overview

Lights / Power

Slide switch to ON to power the speaker. Slide Switch to Lights ON to power the lights and speaker.

Pair Bluetooth

Battery & Wireless Status

Aux In

Micro-USB Power Port

MODEL: REMAIR SUBTOWEN COLOR CHANGES PENSABLE SPOARS FCC D: SAISL45846R THEN CODES COMPLY WITH PART 10 OF THE FCC BOX, OPTION AS AVAILABLE TO SEE FOR ANYING TWO COCONOMICS (1) BY B. DEVOT WHIT NOT CABBAGE HARVEST, MOTHERANCE, AND (2) THIS DEVICE MUST ACCEPT ANY EFFECTIVE PRICE PRICE. INCLUDE IN MOTHERANCE THAT MAY DAVE ORDER ON ORDER ON Bins is based on Digital Products International STOCKS STOCKS, NC. LOADE, AND NOT DO USA IMPORTS ON CREAM / PARE UP

Charging the Speaker

Requires a Micro-USB to USB cable (included).

1. Using a Micro-USB to USB cable (included), connect the larger USB plug to the USB port of a powered on computer or USB power adaptor.
2. Connect the smaller Micro-USB plug into the Micro-USB port of the speaker. The unit will now charge. Be sure the computer is not in sleep mode.

When the unit is charging, the Battery indicator will display solid red. When the unit is fully charged, the indicator will turn off.

Pairing a Bluetooth Device

1. Power on the unit by sliding the Power Switch to the ON position, and press and hold the Pair button. (When pairing, remain within 3 feet of the unit.)
2. Using the controls on your Bluetooth device, select the ISB46 in your Bluetooth settings to pair. (If your device requests a password, enter the default password 0 0 0 0.)
3. When successfully paired, the Pairing Indicator will turn solid blue and an audible chime will sound from the speaker.

After initial pairing, the unit will stay paired unless unpaired manually by the user, or erased due to a reset of the device. If your device should become unpaired, or you find it is unable to connect normally, repeat the steps above.

Playing Audio Wirelessly

1. Once connected, use the controls on your device to select and play audio.

Aux In (3.5mm Audio Input)

Requires a 3.5mm audio cable (not included).

1. Connect a 3.5mm audio cable to the Aux In Input on the unit and the audio output/headphone jack on a media player.
2. The unit will automatically detect the input and switch to Aux In Mode, indicated by a solid green light on the front of the unit.
3. Use the controls on the connected device to select and play audio.