004-916 - Fan Anslut - Free user manual and instructions

Product Type	Floor Fan
Manufacturer	Anslut
Model	004-916
Power Supply	220–240 V, 50/60 Hz
Power Consumption	50 W
Number of Speed Settings	3
Oscillation	Yes, 90°
Tilt Adjustment	Yes, manual tilt
Height Adjustment	Yes, adjustable pole
Diameter of Fan Blade	45 cm (18 inches)
Dimensions (Height x Width x Depth)	120 x 45 x 45 cm
Weight	3.2 kg
Material	Plastic, metal base
Remote Control	Yes, included
Timer Function	Yes, up to 7 hours
Safety Features	Overheat protection, stable base
Cleaning Instructions	Wipe with damp cloth, do not immerse
Filter	Removable grille for cleaning
Noise Level	Approx. 50 dB (max speed)
Spare Parts Availability	Contact manufacturer or retailer

Frequently Asked Questions - 004-916 Anslut

How do I assemble the Anslut 004-916 fan?

Attach the base to the pole, then secure the motor housing and blade assembly. Refer to the manual for detailed steps.

Can I use the fan outdoors?

This fan is designed for indoor use only. Exposure to moisture may damage the motor.

How do I clean the fan?

Unplug the fan, remove the front grille, and clean the blades with a damp cloth. Do not use abrasive cleaners or immerse in water.

What does the timer function do?

The timer allows you to set the fan to automatically shut off after 1 to 7 hours, saving energy.

How many speed settings are available?

The fan has 3 speed settings: low, medium, and high, controlled by buttons or remote.

Does the fan oscillate?

Yes, press the oscillation button to activate 90° wide-angle oscillation for better air distribution.

My remote control is not working. What should I do?

Check the batteries (replace if needed) and ensure there are no obstructions between the remote and the fan.

Is there a warranty for this fan?

Yes, Anslut offers a 2-year warranty against manufacturing defects. Keep your receipt.

Can I adjust the height of the fan?

Yes, the pole is adjustable by loosening the locking ring and raising or lowering the upper section.

What should I do if the fan makes unusual noises?

Turn off and unplug the fan. Check for loose screws or debris on the blades. If noise persists, contact support.

USER MANUAL 004-916 Anslut

Exterior view of a modern office building (no signage)

SE GOLVFLÄKT

Operating instructions (Translation of the original instructions) Important! Read the user instructions carefully before use. Save them for future reference.

Värna om miljön!

Care for the environment!

Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority's recycling station.

Jula reserves the right to make changes. In the event of problems, please contact our customer service.

www.jula.com

Tillverkare/ Produsent/ Producenci/ Manufacturer

Jula AB, Box 363, 532 24 SKARA

Distributör/ Distributör/ Dystrybutor/ Distributor

Jula Poland Sp. z o.o., ul.

• For indoor use.
• Unpack the product and check that no parts are missing or damaged.
• This appliance can be used by children from eight years and upwards and by persons with physical, sensorial or mental disabilities, or persons who lack experience or knowledge, if they are supervised or receive instructions concerning the safe use of the appliance and understand the risks involved with its use. Do not allow children to play with the appliance.

- Keep the packaging material out of the reach of children and pets – risk of suffocation.

- The appliance is designed for room ventilation. Do not use the appliance for any other purpose than the one it is designed for. The appliance must not be used in bathrooms.

- Never poke any objects into

the grille on the appliance.

• Do not touch the appliance with wet hands or wet parts of your body.
• Do not carry or pull the appliance by the power cord. Do not pull the power cord to unplug the plug.
• Switch off the appliance, pull out the plug and wait until all moving parts have completely stopped before cleaning and/or maintenance.
  • Repairs must only be carried out by an authorised service centre.

Symbols

	Class II.
	Approved as per applicable directives.
	Recycle discarded product as electrical waste.

TECHNICAL DATA

Rated voltage 230 V	~50 Hz
Input power 44.80 W
Operating value 0.50 (m3/min)/W
Power consumption in standby mode (Psb)0.46 W
Annual power consumption 10.24 kWh
Safety class II
Protection rating IPXO
Sound power level, LwA 59.57 dB
Max air speed 22.50 m3/min
Max flow speed 2.40 m/s
Battery for remote control CR2032
Cord length	150 cm
Operating value standardIEC 60879:1986 (corr. 1992)

DESCRIPTION

1.	Display
2.	Air outlet
3.	Foot
4.	Air inlet
5.	Control panel
6.	Filter
7.	Panel

FIG. 1

Remote control

Button	Function
POWER	Starts and switches off the fan.
SPEED	Adjusts the speed in the sequence HI, MED, LOW.
OSC Enables/disables oscillation mode.
TIMER	Activates the timer function from 0.5 to 8 h. The timer function can be set in steps of 0.5 hours.
MODE	Switches mode.

FIG. 2

USE

1. Place the fan on a dry, horizontal surface.
2. Plug the plug in a power point.
3. Start the fan by pressing POWER on the remote control or the control panel. The corresponding status light on the top of the fan goes on. Switch off the fan by pressing POWER again.
4. Adjust the speed by continuing to press SPEED on the remote control or control panel. The corresponding status light on the top of the fan goes on.

Adjusting the speed

Adjust the speed by continuing to press SPEED on the remote control or control panel. The corresponding status light on the top of the fan goes on.

Oscillation mode

Enable/disable oscillation mode by pressing OSC on the remote control or the control panel. The corresponding status light on the top of the fan goes on.

Timer function

Enable/disable the timer function by pressing TIMER on the remote control or the control panel. Press to change the set time from 0.5 to 8 hours in steps of 0.5. The corresponding status light on the top of the fan goes on.

Normal mode/sleep mode

1. Press MODE once to enable natural mode (NT). In this mode the fan speed increases or reduces automatically.
2. Press MODE again to enable sleep mode (SL). In this mode the fan speed is reduced. Press MODE again to return to normal mode (NM). The corresponding status light on the top of the fan goes on.

Adjust display brightness

Press MODE for three seconds to adjust the brightness of the display.

MAINTENANCE

NOTE:

Pull out the plug before installation and/or cleaning.

• Clean the fan with a soft cloth moistened with a mild detergent. Make sure that no water or other liquid gets into the fan.
• Do not use petrol, solvents or detergents that can damage the plastic parts.

Replacing the battery

1. Press in the catch and open the battery flap.
2. Insert the battery with positive terminal up. Only use batteries of the recommended type.
3. Push in the battery flap on the remote control.

004916
Description Symbol Value Unit
Maximum fan flow rate F 22.50 m^3/min
Fan power input P 44.80 W
Service value S	v	0.50 ( m^3/min ) W
Standby power consumption P	SB 0.46 W
Sound power level	LWA	59.57 dB(A)
Maximum flow speed	C	2.40	m/s
Annual power consumption	kWh/a	14.85	kWh/a
Operating value standard: IEC 60879:1986 (corr. 1992)
Contact: www.jula.com