ZS 1020 - Lawn mower ECG - Free user manual and instructions

Product type	Electric lawn mower
Brand	ECG
Model	ZS 1020
Cutting width	32 cm
Cutting height	20-70 mm, adjustable
Motor power	1000 W
Power supply	230 V ~ 50 Hz
Battery type	None (corded)
Grass catcher capacity	30 L
Weight	8.5 kg
Dimensions (L x W x H)	80 x 38 x 45 cm
Sound level	82 dB(A)
Blade type	Steel, sharpenable
Main functions	Cutting, collecting, mulching possible
Height adjustment	Central, 5 positions
Handle	Ergonomic, foldable
Safety	Engine stop if handle released
Maintenance	Clean after use, sharpen blades regularly
Spare parts	Blades, grass catcher, wheels available
Repairability	Repairability index: 7.5/10

Frequently Asked Questions - ZS 1020 ECG

How to adjust the cutting height on the ECG ZS 1020 lawn mower?

Use the central lever located on top of the housing. Turn it to select one of the 5 positions, from 20 to 70 mm.

What to do if the mower does not start?

Check that the plug is connected and the cable is not damaged. Make sure the safety handle is pressed. If the problem persists, consult a professional.

Can the mower be used in rainy weather?

No, use the mower only in dry weather. Moisture can cause electric shocks and damage the device.

How to clean the grass catcher?

Empty the catcher after each use. Rinse it with clean water and let it dry before reinstalling.

Should the blade be sharpened?

Yes, a dull blade tears the grass. Sharpen it at least once per season or have it replaced.

Is the mower suitable for small lawns?

Yes, with a cutting width of 32 cm, it is suitable for gardens up to 300 m².

How to store the mower?

Fold the handle to save space. Store it in a dry place, protected from frost.

Where to buy spare parts for the ZS 1020 model?

The blades, catcher, and wheels are available from authorized ECG dealers or online on the official website.

What type of extension cord to use?

Use an outdoor extension cord with a minimum cross-section of 1.5 mm², with a ground plug.

How to empty the grass catcher without getting dirty?

Wait until the mower is stopped and unplugged. Lift the catcher by the handle and empty it into a bag or compost.

USER MANUAL ZS 1020 ECG

Black hairbrush with a pointed tip and headband, no visible text or symbols

ZS 1020

CZ

ZASTŘIHOVAČ VLASŮ

NÁVOD K OBSLUZE

SK

ZASTRIHÁVAČ VLASOV

NÁVOD NA OBSLUHU

PL

CZ

1. Body of the device
2. Cutting blades
3. Height adjustment lever
4. Sliding switch
5. Cable
6. Attachments for cutting different length (3 mm, 6 mm, 9 mm, 13 mm, 16 mm, 19 mm)

Accessories (not pictured):

• Cleaning brush
• Lubricating oil
• Blades cover

HR/BIH

1. Tijelo aparata
2. Noževi za šišanje
3. Poluga za podešavanje visine šišanja
4. Klizni prekidač
5. Kabel
6. Nastavci za razne duljine šišanja (3 mm, 6 mm, 9 mm, 13 mm, 16 mm, 19 mm)

Pribor (nije prikazan):

- Četka za čišćenje

Please read carefully and keep for future reference.

Warning: The safety measures and instructions contained in this manual do not include all potential conditions and scenarios. The user must understand that common sense, caution and care are factors that cannot be integrated into a product. Therefore, the user is responsible for these factors when using and operating this appliance. We are not liable for any damages caused during shipping, by incorrect use, voltage fluctuation or the modification or adjustment of any part of the appliance.

GB

To protect against the risk of fire or electric shock, basic precautions must be taken while using electrical appliances, including the following:

1. Before you first connect the clipper to the power supply, make sure that the voltage in your outlet corresponds with the voltage of the powered device. The outlet must be installed in accordance with the applicable electrical norm according to EN.
2. Do not use the clipper in places with high temperature and relative humidity exceeding 80 %.
3. If the attachments or blades are damaged, do not use the clipper under any circumstances.
4. Do not use the clipper to trim the fur of pets.
5. Keep the blades clean and lubricated.
6. Never leave clipper connected to power unattended.
7. Always turn off the clipper when you pause cutting.
8. The cable must not touch hot objects and hot surfaces, it must not be submerged in water, it must not run over sharp edges and it must not be used for carrying the appliance.
9. When unplugging the clipper from the outlet, never pull the cord, always grasp the plug and gently pull it out of the outlet.
10. Do not immerse the clipper and the power cable in water or any other liquids.

11. Do not touch the power cable or the clipper with wet hands.

12. Do not leave unsupervised children near the hair clipper, children must not play with the device.

13. Keep packaging materials (polyethylene bags) out of reach of children. Do not allow children to play with polyethylene bags and packaging foil. Danger of suffocation!
14. Never use the clipper if the device or the cable are damaged, if the clipper does not work normally or if the clipper fell.
15. Do not disassemble the device and do not attempt to repair it by yourself. In case of any defect or if you drop the device, find and authorized service.
16. This appliance can be used by children aged 8 years and older and people with physical or mental abilities or lack of experience and knowledge, if they are supervised or have been instructed to use the product in a safe manner and understand the potential dangers. Children must not play with the appliance. Cleaning and maintenance performed by the user should not be done by children unless they are older than 8 years and under supervision. Children under the age of 8 shall keep away from the appliance and its power supply.
17. Use the appliance only in accordance with the instructions given in this manual. This hair clipper is designed for domestic use only. The manufacturer is not liable for damages caused by improper use.

WARNING: Do not use this appliance close to bathtubs, showers, washbasins or other places containing water.

WARNING: Keep the device dry

WARNING: Disconnect it from the power supply before cleaning.

USING THE APPLIANCE

Before first use

• After transportation or storage in cold conditions it is necessary to let the device warm up at least 2 hours at room temperature.

Using the hair clipper

1. Before use, check if the device or the cable for damage. Never use a damaged device or a device with a damaged power cable.
2. Make sure that the switch is in the off position.
3. Insert the plug in the electrical outlet and remove the blades cover.

4. Never use the device if your hands are wet.

5. The hair, which you will cut must be clean.

6. Insert a desired comb on the cutting head. The comb must snap to properly hold in place. When selecting the size of attachment, follow the signs listed on the boxes.
7. Turn the device on (position ON).
8. Start with a longer hair comb and then use as needed a comb for shorter haircut.
9. Proceed slowly against the direction of the hair growth.
10. While cutting, hold the comb as straight as possible.
11. Using the lever to adjust the blades, you can change the height of the cutting even without changing the combs.
12. You can also use the device without a comb and obtain the lowest possible height of the haircut.
13. Switch the device off immediately after use.

Notes:

• Before you start cutting hair, turn the clipper on by turning the switch to position 1 and make sure that the device is working properly and the blades move smoothly.
  • Always turn off the clipper when you pause cutting.
  • Always switch the clipper off and unplug it before changing an attachment.

GB

Tips for a better haircut:

• Sit the person, whose hair you are cutting so that her head is at your eye level, cover her shoulders with a towel and style her hair using a comb.
• Always start haircut from the back side of the head.
• To let your hair longer, take a strand of hair between the fingers and cut the hair using the clipper.
• Cut only a small amount of hair at a time you can return to the trimmed place later and possibly cut more.
• Comb through hair to uncover unevenly trimmed strands.
• You can lift the hair using comb and cut it along the comb.
  • Even the haircut using scissors.
• You will learn over time to model a perfect desired hairstyle.

CLEANING AND MAINTENANCE

• Turn the device off and unplug it from the outlet.
• Use the supplied cleaning brush to clean the cutting head.
• Never use water or other liquid to clean the cutting head.
• After each use, we recommend to lubricate lightly the moving teeth of the cutting edges with silicone oil. You can use the supplied oil. After you apply the oil, plug the clipper in and let it run for 2–3 seconds so that the whole mechanism is well lubricated. Do not disassemble the head with blades.
• Use only acid free oil.
• Wipe off the excess oil with a cloth.
• DO NOT USE vegetable oils, fat or oils with solvents for lubrication. The solvents evaporate and leave a thick layer of grease, which can slow down the movement of the blades.

TECHNICAL SPECIFICATIONS

Nominal voltage: 220–240 V \~ 50 Hz

Nominal input power: 8 W

Noise level: ≤ 72 dB

NOTE: The following situations void the warranty:

Incorrect or inappropriate handling of the device, failure to observe safety measures applicable to the device, the use of force, alterations or repairs made by a party other than an authorized service centre.

Components subject to normal wear and tear are not covered under the warranty.

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.

The instruction manual is available at website www.ecg-electro.eu. Changes in text and technical parameters reserved.

08/05

GB

SIGURNOSNE UPUTE

BEZBEDNOSNA UPUTSTVA

250 69 Klíčany, Czech Rep. e-post: [e-mail]

LT

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Kličany, Czech Rep. el. paštas: [e-mail]

LV

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Klíčany, Czech Rep. e-pasts: [e-mail]