ZS 1520CC - Lawn mower ECG - Free user manual and instructions

Product Type	Petrol Lawn Mower
Brand	ECG
Model	ZS 1520CC
Engine Displacement	1520 cc
Cutting Width	46 cm (18 inches)
Cutting Height Adjustment	Central, 6 positions (25-75 mm)
Grass Bag Capacity	60 liters
Drive Type	Self-propelled, rear-wheel drive
Start Type	Recoil start
Fuel Type	Unleaded petrol (95 RON)
Engine Oil Capacity	0.6 liters (SAE 30)
Mulching Function	Yes (mulching plug included)
Side Discharge	Yes (chute included)
Dimensions (L x W x H)	150 x 58 x 105 cm
Weight	Approx. 32 kg
Noise Level (LWA)	96 dB(A)
Vibration Level	< 2.5 m/s²
Safety Features	Operator presence control, blade brake
Warranty	2 years (parts and labor)
Recommended Maintenance	Oil change every 25 hours, air filter cleaning
Spare Parts Availability	Blades, filters, spark plugs, belts

Frequently Asked Questions - ZS 1520CC ECG

What type of oil should I use for the ECG ZS 1520CC lawn mower?

Use SAE 30 oil for temperatures above 0°C. The engine oil capacity is 0.6 liters.

How do I start the lawn mower?

Ensure the blade control bar is pressed, turn the fuel valve to ON, set the choke to START (if cold), then pull the recoil starter rope firmly.

What is the cutting width of this mower?

The cutting width is 46 cm (18 inches), suitable for medium to large lawns.

Can I use the mower for mulching?

Yes, the ZS 1520CC comes with a mulching plug that allows you to chop grass finely and return nutrients to the lawn.

How often should I sharpen the blade?

Sharpen the blade at least once per season or after 25 hours of use. Dull blades tear grass, causing a brownish appearance.

What type of fuel does the mower require?

Use unleaded petrol with a minimum octane rating of 95 RON. Avoid using E10 or higher ethanol blends.

How do I adjust the cutting height?

Use the central lever to change the cutting height. There are 6 positions ranging from 25 mm to 75 mm.

Is the mower self-propelled?

Yes, it features rear-wheel drive with adjustable ground speed for effortless mowing on flat terrain.

What safety features does the mower have?

It includes an operator presence control that stops the blade and engine when the handlebar is released, and a blade brake for quick stopping.

Where can I find replacement parts?

Replacement parts such as blades, air filters, spark plugs, and drive belts are available from authorized ECG dealers or online. Use the model number ZS 1520CC.

USER MANUAL ZS 1520CC ECG

Close-up of a black and blue hairbrush with a circular button on the blade (no visible text or symbols)

ZS 1520 CC

CZ

ZASTŘIHOVAČ VLASŮ

NÁVOD K OBSLUZE

SK

ZASTRIHÁVAČ VLASOV

NÁVOD NA OBSLUHU

PL

CZ

1. Head with blades
2. Sliding switch 0/I
3. Charging light indicator
4. Sliding comb attachment for 4/5,5/7/8,5/10/11,5/13/14,5/and 16 mm
5. Oil
6. Cleaning brush
7. Adapter

Other accessories (not shown): storage case, user's manual

Figure nr. 2: replacing the comb attachment and adjusting the length of the cut

Figure nr. 3: cleaning and maintenance

OBRÁZEK Č. 2 / OBRÁZOK Č. 2 / RYSUNEK Č. 2 / 2. ÁBRA / BILD 2 / FIGURE NR. 2

OBRÁZEK Č. 3 / OBRÁZEK Č. 3 / RYSUNEK Č. 3 / 3. ÁBRA / BILD 3 / FIGURE NR. 3

Symbol of a trash bin with crossed lines indicating no waste or restriction, plus a solid black rectangle below (no text or symbols)

08/05

Symbol of a trash bin with crossed lines indicating no waste or restriction, plus a solid black rectangle below (no text or symbols)

08/05

Symbol of a trash bin with crossed lines indicating no waste or restriction, plus a solid black rectangle below (no text or symbols)

08/05

Ni-Mh

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

08/05

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

08/05

Read carefully and save for future use!

Warning: The safety measures and instructions contained in this manual do not include all potential conditions and scenarios. The user must understand that common sense, caution and care are factors that cannot be integrated into a product. These factors must therefore be ensured by the user/users using and operating this device. We are not liable for any damages caused during shipping, by incorrect use, voltage fluctuation or the modification or adjustment of any part of the appliance.

Read the operating instructions carefully before using the device for the first time and follow the safety instructions!

The device may only be used as described in this manual.

Save the manual for future reference.

If you pass the device to another person, please add this manual.

Warnings in this manual

If necessary, the following warnings will be used in this manual:

DANGER! High risk: Failure to observe this warning may endanger life or health.

WARNING! Medium risk: Failure to observe this warning may result in injury or serious damage.

NOTICE: Low risk: Failure to observe this warning may result in minor injury or minor damage.

NOTE: Circumstances and specifics to be observed when handling the device.

GB

SAFETY INSTRUCTIONS

Purpose

Hair trimmer is intended exclusively for cutting human hair. Use the device only on dry hair.

The device is designed for home use and must not be used for commercial purposes.

The device may be used only indoors.

Possible ways of improper use

Do not use the device to cut artificial hair or animal fur.

Instructions for safe operation

• Use only the supplied original power supply to connect to the power outlet. This appliance may be used by children aged 8 years and older and people with reduced physical or mental abilities or lack of experience and knowledge when supervised or instructed to use the appliance in a safe manner and understand the potential hazards. Children must not play with the appliance. Cleaning and maintenance may not be performed by children, unless they are 8 years of age or older and under supervision. Children under the age of 8 must be kept away from the appliance and its power supply.
• Store the device in a dry place.

DANGER for children

Children must not play with the packaging material.

Do not let the children play with plastic bags.

Danger of suffocation.

DANGER

of electric shock due to moisture (when charging or using the device plugged into an electrical outlet directly via an adapter)

Never place the device so that it could fall into water while still connected to the adapter.

• Protect the device from moisture, dripping or splashing water.
• Never touch the device with wet hands.
• The appliance, the cable or the power adapter must not be immersed in water or other liquids or rinsed under running water.
• If ...

...the device falls into water, disconnect the power adapter immediately and only then remove the device from the water. Do not use the device afterwards, but have it checked by a specialized technician.

...fluid comes into the device or adapter, have it checked before switching it on again.

...you use the device in the bathroom, the adapter must be disconnected from the

outlet after use, because the proximity to water presents a risk even when the device is switched off.

...Before you use the trimmer for the first time, make sure that your outlet voltage matches the operating voltage of the power adapter. The outlet must be installed in accordance with applicable electrical codes according to EN.

DANGER of electric shock

Do not use the trimmer if the device, the adapter or the cable show visible signs of damage or if you dropped it.

GB

• First connect the adapter connector to the device and then plug the adapter into the outlet.
• Connect the adapter only to a properly installed electrical outlet with the voltage corresponding to the voltage on the product label of the adapter. The electrical outlet must be easily accessible after connection.

• Ensure that the cable can not be damaged by sharp edges or hot surfaces.

• Ensure that the cable is not pinched or crushed.

• Unplug the adapter from the electrical outlet

...

...after each use when you use the device with the adapter plugged directly.

...after each charging.

...in case of malfunction.

...prior to cleaning the device, in case that you use the device with the adapter plugged directly and

...during thunderstorms.

GB

• Never pull on the cable when disconnecting.
• To avoid any risk, do not make any changes to the device or accessories. Repairs must be carried out by a specialized company.

DANGER! When handling Ni-MH batteries, observe the following instructions:

• Charge the device using only the original power supply.

• Protect the batteries from mechanical damage.

• Do not expose the device to direct sunlight and high temperatures. If the device is heated to more than 125 °C, the batteries may ignite.

• Do not leave the device near a source of burning, as it may cause fire. You can use normal extinguishers for extinguishing (powder extinguishers with extinguishing powder ABC, extinguishers with CO).
• If liquids leak from the batteries, avoid contact with eyes, mucous membranes and skin as well as inhalation of vapors. Rinse the affected area with plenty of clean water immediately. In any case, contact a physician.
• Leaked fluids must be absorbed with an absorbent and properly disposed off.
• Open batteries are a hazardous waste and therefore have to be disposed off properly.

WARNING! Risk of cuts

The blades are very sharp Handle them carefully.

• Do not use the device when the head or the attachment are damaged.
  • Always disconnect the device before cleaning.

WARNING! Risk of injury

Do not use the device on open wounds, cutting wounds, sunburns and blisters.

WARNING! Danger of injury by the trimmer oil

Keep the small oil container from the reach of children.

• Avoid contact of the trimmer oil with your eyes. If the oil of the trimmer gets into your eyes, rinse them out immediately with plenty of water and remove the oil completely.
• Never swallow the trimmer oil.

NOTICE! Property damage

Use original accessories only.

• Never place the device on hot surfaces (eg hot plates) or near sources of heat or naked flames.
• Do not cover the power source to prevent overheating.
• Do not use coarse or abrasive cleaners.

Before first use

• After transporting or storing in cold conditions, allow the device to warm up at room temperature for at least 2 hours.

CHARGING

Charging

NOTICE! Property damage

Remember that the battery capacity becomes shorter after prolonged periods of storage. Long charging times due to interruption between charging and discharging cycles should be therefore avoided.

WARNING: Use exclusively the adapter ZDJ030060EU supplied with the trimmer for charging. Make sure before charging that the switch is in the "0" position.

NOTES

1. Connect the power adapter to the device.
2. Connect the power adapter to an easily accessible electrical outlet.
3. When the adapter is plugged into the outlet, the red LED on the trimmer body is constantly on.

To extend battery life, we recommend the following charging times:

First charging - charging time about 12 hours

Each additional charging - charging time about 8 hours

1× in six months – we recommend to extend the charging time to about 12 hours.

Warning: The red LED is permanently lit even after full charge.

1. The operating time with a fully charged battery is about 50 minutes.

OPERATION

NOTES:

• The cut hair of beard must be dry.
- The length of the cut may vary according to the cutting angle.
- First, start with the comb attachment set to the longest cut, then use shorter cutting lengths during the cutting process.

Regardless of the charge status of the battery, you can always use the hair trimmer with the power adapter.

1. To use the AC adapter, make sure its power is turned off before plugging it in.

2. Turn the device on by sliding the switch in position 1.

Before first cutting your hair, turn on the trimmer by sliding the switch to position "1" to make sure the device is working normally and the blades move smoothly.

Setting the cut length (see fig. 2)

To move or to remove the attachment first press the lock on the bottom side („a“ in the picture).

Adjust the length of the cut on the attachment by moving the attachment upwards (the length of the cut increases) or downwards (the length of the cut decreases) - „b-c“ in the picture.

The length of the cut shows in the window – „7“ in the picture.

Cutting hair (see fig. 1)

1. Before cutting the hair make sure the hair is clean and dry. You will achieve the best results with dry, not wet hair.
2. Place a person so that you have her head at the height of your eyes, cover his/her shoulders with a towel and adjust the hair style using the comb.
3. Always start cutting from the back of the head.
4. If possible, cut against the direction of hair growth and move towards the center of the head.
5. To keep the hair longer take a strand of hair between your fingers and cut the hair with the trimmer.
6. First just cut a small amount of hair, later you can go back to the already trimmed area and cut more of the hair.
7. Comb through hair to uncover unevenly trimmed strands.
8. You can lift the hair using comb and cut it along the comb.
9. Even the haircut using scissors.
10. You will learn over time to model a perfect desired hairstyle.

NOTE: Always turn off the trimmer during breaks in cutting.

CLEANING AND MAINTENANCE (see fig. 3)

- Turn off the unit and disconnect it from the outlet (if you use it with the adapter plugged in).

• Remove the removable comb attachment and rinse it with water. Before reassembly, allow it to dry thoroughly.
• To clean the cutting head with the blades, use the supplied cleaning brush.
• Never clean the head with blades with water or other fluid.
• We recommend gently lubricating the moving teeth of the cutting edges with silicone oil after each use.
• You can use the supplied oil.
• Use only acid free oil.
• DO NOT USE vegetable oils, fat or oils with solvents for lubrication. The solvents evaporate and leave a strong layer of grease that can slow the movement of the blades.
• Gently press the blades from the underside to move the head see „a-b“ in the picture and lubricate in the locations marked by the arrows.
• Remove the excess lubricant with a dry, lint-free cloth.

TROUBLESHOOTING

DANGER!

Do not attempt to repair the device by yourself.

Whenever a malfunction occurs, pull the plug out of the electrical outlet.

Malfunction: Check the following:
The device does not work	• Is power supply ensured during charging?• Is the battery empty?
The heads of the trimmer do not work smoothly	• Are the heads clean and lubricated?

If any of the above-mentioned malfunctions occur, contact our service center without delay.

Repairs must be carried out by a specialized company.

TECHNICAL SPECIFICATIONS

Charging adapter:Input voltageOutput voltageProtection classOperating conditions	ZDJ030060EU100–240 V~, 50/60 Hz, 0,2 A3 V =-, 600 mA☐ IIDesigned exclusively for use indoors
Hair trimmer:Input voltageBatteryPermissible ambient temperatureNoise level	3.0 V =-, 600 mA2,4 V NiMh battery, 600 mAhFrom 5 °C to +35 °C65 dB

We reserve the right to make technical and visual changes to the device or its accessories for the continuous improvement of the product.

DISPOSAL

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)

Symbol of a trash bin with crossed lines indicating no waste or restriction, plus a solid black rectangle below (no text or symbols)

08/05

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

Dispose of the oil container after emptying.

The Ni-Mh battery used in this appliance must not be disposed of in mixed household waste. The battery must be properly disposed. For more information, check with your battery distributors or collection points for waste disposal.

Ni-Mh

This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.

The instruction manual is available at website www.ecg-electro.eu.

Changes in text and technical parameters reserved.

www.ecg-electro.eu

K+B Progres, a.s.

U Expertú 91 tel.: [phone]

250 69 Klíčany e-mail: [e-mail]