Draper

DC45/85 - Door closer Draper - Free user manual and instructions

Find the device manual for free DC45/85 Draper in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Draper DC45/85 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Door Closer
Brand Draper
Model DC45/85
Application Interior and exterior doors
Mounting Surface mounted
Closing Force Adjustable EN1-EN4
Max Door Width Up to 1100 mm
Max Door Weight Up to 60 kg
Backcheck Adjustable
Latch Speed Adjustable
Closing Speed Adjustable
Delay Action Adjustable
Materials Steel body, zinc alloy arm
Finish Silver or white
Dimensions (L x W x H) 250 x 55 x 82 mm
Weight 1.5 kg
Operating Temperature -20°C to +60°C
Certifications CE, ANSI/BHMA Grade 1
Included Accessories Closer body, mounting plate, arm, screws, template
Maintenance Lubricate moving parts annually
Cleaning Wipe with damp cloth, avoid harsh solvents

Frequently Asked Questions - DC45/85 Draper

How do I adjust the closing speed on the Draper DC45/85?
Locate the adjustment valves on the closer body. Turn the valve marked 'SC' (sweep speed) clockwise to slow the closing speed, counterclockwise to speed it up. Use a hex key (included) to make fine adjustments.
Can the DC45/85 be mounted on both left- and right-handed doors?
Yes, the Draper DC45/85 is reversible. It can be mounted on both left-hand and right-hand doors by flipping the mounting orientation. Follow the template and instructions for your specific door hand.
What is the maximum door weight and width for this door closer?
The DC45/85 is suitable for doors up to 60 kg (132 lbs) and up to 1100 mm (43 inches) wide. For heavier or wider doors, consider a higher power size.
How do I adjust the backcheck feature?
The backcheck is adjusted using the valve labeled 'BC'. Turn it clockwise to increase the backcheck force, which prevents the door from opening too forcefully. Adjust in small increments and test.
Does the Draper DC45/85 come with a template for installation?
Yes, the package includes a paper template that shows drilling positions for standard mounting. It also includes mounting screws and brackets.
What is the warranty on this door closer?
Draper offers a 1-year limited warranty on the DC45/85 against defects in materials and workmanship. Proof of purchase is required.
Can I use this closer on a fire door?
The Draper DC45/85 is suitable for fire doors if installed according to local codes. It meets standard fire door requirements, but verify with your local authority.
How do I lubricate the door closer?
Annually, apply a few drops of lightweight machine oil to the pivot points and the sliding arm. Do not over-lubricate. Wipe off excess oil.
What should I do if the door closer leaks oil?
Oil leakage indicates a seal failure. The closer should be replaced immediately. Do not attempt to repair it yourself as it is a sealed unit. Contact Draper support.
Are replacement arms available for the DC45/85?
Yes, replacement arms can be purchased separately. Ensure you order the correct arm type (regular or parallel arm) for your installation. Contact Draper or an authorized dealer.

User questions about DC45/85 Draper

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Door closer in PDF format for free! Find your manual DC45/85 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DC45/85 by Draper.

USER MANUAL DC45/85 Draper

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Draper

Model : DC45/85

Category : Door closer