G 3610DA - Grinder HiKOKI - Free user manual and instructions
Find the device manual for free G 3610DA HiKOKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Angle Grinder |
| Brand | HiKOKI |
| Model | G 3610DA |
| Voltage | 36 V |
| Battery Type | Multi Volt (36 V / 18 V) |
| Disc Diameter | 100 mm (4 in) |
| No Load Speed | 3,000 – 9,000 rpm |
| Spindle Thread | M10 × 1.5 |
| Max Cutting Depth | 26 mm |
| Switch Type | Slide switch with lock-off |
| Soft Start | Yes |
| Variable Speed | Yes |
| Safety Features | Electronic brake, overload protection, battery indicator |
| Dimensions (L × H) | 440 × 150 mm |
| Weight (with battery) | 2.7 kg |
| Housing Material | Nylon, reinforced |
| Vibration Level | 7.0 m/s² |
| Maintenance | Clean vents, check carbon brushes, inspect disc |
| Standard Accessories | Side handle, wrench, grinding disc, battery (sold separately), charger (sold separately) |
| Reparability | Replaceable carbon brushes, serviceable gearbox |
Frequently Asked Questions - G 3610DA HiKOKI
What battery does the HiKOKI G 3610DA use?
The G 3610DA is compatible with HiKOKI Multi Volt batteries, which can be used in both 36V and 18V modes. It typically uses a 36V (BSL36 series) or 18V (BSL18 series) slide-type battery. For optimal performance, use a 36V battery.
Can I use the grinder without a battery?
No, the G 3610DA is a cordless tool and requires a charged HiKOKI Multi Volt battery to operate. It does not have a corded option.
What disc size is compatible with the G 3610DA?
The grinder accepts 100 mm (4 inch) discs with a bore of 16 mm. Always use discs rated for the maximum speed (9,000 rpm) and ensure they are in good condition.
How do I adjust the speed on the G 3610DA?
The variable speed dial is located on the side of the grinder. Rotate it to select a speed between 3,000 and 9,000 rpm. Lower speeds are suitable for polishing, higher for grinding and cutting.
Does the grinder have a brake?
Yes, the G 3610DA features an electronic brake that stops the disc quickly when the switch is released, enhancing safety.
How do I change the disc?
1. Ensure battery is removed. Press the spindle lock to hold the shaft. 2. Use the supplied wrench to loosen the lock nut. 3. Replace the disc and tighten the nut securely. Always wear gloves.
What safety precautions should I take?
Always wear safety goggles, hearing protection, and gloves. Use the side handle for control. Never use a damaged disc. Disconnect the battery before changing accessories. Keep the work area clean.
How do I clean and maintain the grinder?
After each use, blow out dust from the vents with compressed air. Check carbon brushes periodically; replace when shorter than 5 mm. Inspect the gearbox grease every 6 months. Wipe the exterior with a dry cloth.
Why does the grinder stop suddenly during use?
This may be due to overload protection. The tool automatically shuts off if excessive pressure or heat is detected. Release the switch, let it cool, and reduce pressure. If it persists, check the disc for binding.
Can I use the G 3610DA for cutting metal?
Yes, it is suitable for cutting metal with appropriate cutting discs. For metal, use a thin cutting disc rated for 100 mm and operate at high speed (9,000 rpm). Secure the workpiece and apply steady but light pressure.
User questions about G 3610DA HiKOKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual G 3610DA - HiKOKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 3610DA by HiKOKI.