G13SS2 - Grinder HiKOKI - Free user manual and instructions
Find the device manual for free G13SS2 HiKOKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Angle Grinder |
| Brand | HiKOKI |
| Model | G13SS2 |
| Disc Diameter | 115 mm (4-1/2") |
| Power Rating | 600 W |
| No-Load Speed | 11000 rpm |
| Input Voltage | 220-240 V ~ 50/60 Hz |
| Weight | 1.8 kg |
| Dimensions (L x W x H) | 260 x 70 x 100 mm |
| Spindle Thread | M10 x 1.5 |
| Safety Features | Paddle switch, lock-off button, spindle lock |
| Protection | Overload protection, soft start (if applicable) |
| Body Material | Reinforced nylon housing |
| Power Cord Length | 2.5 m |
| Included Accessories | Grinding wheel, guard, side handle, spanner |
| Maintenance | Clean air vents regularly; replace carbon brushes when worn |
| Certification | CE, UKCA |
| Vibration Level | 7.0 m/s² (typical) |
| Sound Level | 85 dB(A) (typical) |
| Warranty | 1 year (check local policy) |
Frequently Asked Questions - G13SS2 HiKOKI
What is the correct disc size for the HiKOKI G13SS2?
The HiKOKI G13SS2 uses a 115 mm (4-1/2 inch) disc with a bore diameter of 22.2 mm. Always use the correct size to ensure safety and performance.
How do I change the grinding disc on this angle grinder?
First, unplug the grinder. Press the spindle lock button to prevent rotation. Use the supplied spanner to loosen the flange nut. Replace the disc and retighten the nut. Ensure the disc is properly seated before use.
What is the maximum RPM of the G13SS2?
The no-load speed is 11000 rpm. Always use discs rated for at least this speed to avoid disc disintegration.
Can I use the grinder for cutting metal?
Yes, but you need to use a cutting disc designed for metal. The standard grinding wheel is for grinding. Always switch to a cutting disc and secure the workpiece properly.
How do I maintain the carbon brushes?
Carbon brushes wear over time. Check them after every 50 hours of use. If they are less than 6 mm long, replace both brushes. Access them by removing the brush caps on the motor housing.
What safety precautions should I take?
Always wear safety goggles, gloves, and ear protection. Ensure the guard is in place. Do not use damaged discs. Keep the power cord away from the disc. Disconnect when changing accessories.
Is the HiKOKI G13SS2 compatible with a vacuum cleaner?
This model does not have a direct dust extraction port, but you can use an external dust shroud connected to a vacuum. Some aftermarket accessories are available.
What should I do if the grinder vibrates excessively?
Excessive vibration often indicates an unbalanced or damaged disc. Stop immediately and check the disc for cracks or wear. Also check that the disc is properly mounted and not loose.
Can I use the grinder for wood carving?
Yes, with appropriate wood carving discs or sanding pads. Be cautious of kickback and ensure the workpiece is securely clamped. Use at low speed if adjustable.
Where can I find the user manual for download?
You can download the user manual for the HiKOKI G13SS2 for free from notice-facile.com or the official HiKOKI website. The manual includes detailed instructions and safety information.
User questions about G13SS2 HiKOKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual G13SS2 - HiKOKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G13SS2 by HiKOKI.
