VT-3407 W - Blender Vitek - Free user manual and instructions

Product Type	Blender
Brand	Vitek
Model	VT-3407 W
Color	White
Power Consumption	Approx. 600 W
Rated Voltage	220-240 V ~ 50/60 Hz
Jar Capacity	1.5 L
Jar Material	Glass
Blade Material	Stainless steel
Speed Settings	Multiple speeds with pulse function
Safety Lock	Yes (prevents operation without lid)
Non-Slip Feet	Yes
Dishwasher Safe Parts	Detachable jar and lid
Dimensions (H x W x D)	Approx. 40 x 20 x 20 cm
Weight	Approx. 2.2 kg
Power Cord Length	Approx. 1 m
Warranty	1 year (subject to local regulations)

Frequently Asked Questions - VT-3407 W Vitek

How do I assemble the blender?

Place the jar on the motor base, ensuring it locks into position. Add ingredients, then screw the lid on tightly and press the desired speed button.

Can I blend hot liquids?

It is not recommended to blend hot liquids directly. Allow them to cool below 60°C to avoid pressure buildup and potential damage.

How do I clean the blender?

Disassemble the jar, lid, and blade assembly. Wash them in warm soapy water or place them on the top rack of a dishwasher. Wipe the motor base with a damp cloth.

Why does the blender not start?

Ensure the jar is properly locked onto the base and the lid is securely closed. Check the power connection and that the speed control is not at 0. If it still doesn't start, contact support.

Can I crush ice with this blender?

Yes, the blender is suitable for crushing ice. Use the pulse function or a high speed setting and add a small amount of liquid to aid the process.

What is the maximum capacity for dry ingredients?

For dry ingredients like grains, do not exceed 1 cup (approximately 200 g) to avoid overloading the motor. Always refer to the user manual.

How do I replace the blender blade?

The blade assembly is not user-serviceable. If damaged, contact Vitek service center for replacement. Do not attempt to disassemble the blade base.

Is the blender suitable for making nut butters?

Yes, but it may require scraping down the sides and using the pulse function. Process in short bursts to avoid overheating.

What should I do if the blender leaks?

Check the lid seal for damage and ensure the lid is screwed on tightly. Also verify that the jar is not cracked. If the leak persists, stop use and contact support.

Can I use the blender for grinding coffee beans?

It is not recommended as the blender is designed for wet and soft ingredients. Using it for coffee beans may dull the blades and damage the motor.

USER MANUAL VT-3407 W Vitek

The blender set is intended for whisking, mixing, chopping or combined processing of liquid and solid products.

Description

1. Detachable blender attachment
2. Motor unit
3. Turbo mode button "II"
4. ON button "I"
5. Speed control knob
6. Chopper bowl
7. Chopping knife
8. Geared lid
9. Whisk gear
10. Whisk for beating/mixing of liquid products
11. Measuring cup
12. Measuring cup lid

SAFETY MEASURES

Before using the unit, read these instructions carefully and keep them for future reference.

Use the unit according to its intended purpose only, as it is stated in this user manual.

Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

• Before connecting the unit to the mains, make sure that the voltage specified on the unit corresponds to your home mains voltage.
• The blender set allows quick and effective operation, but continuous operation time should not exceed 1 minute while using blender attachment, whisk or mash making attachment, and 20-30 seconds while chopping products in the processor. Make at least a two-minute break between operation cycles.

- When using the blender attachment, cool down hot products, maximal temperature of products should not exceed 70°C.

- It is not allowed to switch the unit on without attachments and products for processing.

- Do not use the unit outdoors.

- Do not place the chopper bowl into a microwave oven.

- Use only the attachments supplied.

- Always unplug the unit before changing the attachments.

• Before using the unit for the first time, thoroughly wash all the removable parts that will contact food.
• Before using the unit, make sure that the attachments are set properly.
• Place the chopper bowl on a flat stable surface.
• Products should be put into the chopper bowl before the unit is switched on.
• Do not overfill the chopper bowl with products and watch the level of liquids.
• The cutting edges of the chopping knives and the blender attachment are very sharp and dangerous. Handle these attachments very carefully!
• If rotation of the chopping knife is hindered during the operation of the chopper, unplug the unit and carefully remove products that prevent blade rotation.
• Remove products and pour out liquids from the chopper bowl only after complete stop of the chopping knife.
• Do not touch rotating parts of the unit. Do not let hair or free hanging clothes get into the rotation area of the blender attachment knife or whisk.
• Never leave the unit connected to the mains unattended.
• Unplug the unit every time before cleaning or when you do not use it.
• Unplug the unit by taking the power plug directly. Do not pull the power cord and do not twist it.
• Do not put the attachments and bowls in a dishwashing machine.
• Do not use the unit near hot surfaces (such as gas or electric stove, oven).
• Provide that the power cord does not touch sharp edges of furniture and hot surfaces.
• Do not touch the motor unit body, the power cord or the power plug with wet hands.
• Do not use the unit if the power cord or the power plug is damaged.
• For children safety reasons, do not leave polyethylene bags, used as a packaging, unattended.

Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

ENGLISH

Do not allow children under 8 years of age to touch the motor unit body, the power cord or the power plug during operation of the unit.

1. Do not allow children under 8 years of age to use the unit as a toy.
2. Close supervision is necessary when children under 8 years of age or disabled persons are near the operating unit.
3. This unit is not intended for usage by children under 8 years of age.
4. Children aged 8 and over as well as disabled persons can use this unit only under supervision of a person who is responsible for their safety, if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.
5. Do not try to repair the unit by yourself. If the unit malfunctions, apply to the authorized service center.
6. To avoid damages, transport the unit in original package only.
7. To avoid risk of electric shock or fire, do not immerse the unit, the power cord and the power plug of the unit into water or any other liquids. If the unit was dropped into water:
8. do not touch the water;
9. unplug the unit immediately, only after that you may take the unit out of water;
10. apply to an authorized service center for testing or repairing the unit.
11. Keep the unit out of reach of children under 8 years of age.

After unit transportation or storage at low temperature, it is necessary to keep it for at least two hours at room temperature before switching on.

• Wash the attachments that will contact products with warm water and a neutral detergent and dry them thoroughly before use.
• Wipe the motor unit (2), whisk gear (9) and geared lid (8) with a soft slightly damp cloth, then wipe it dry.

Attention!

• Do not immerse the motor unit (2), the whisk gear (9), the geared lid (8), the power cord and the power plug into water or any other liquids.
• Do not put the attachments and bowls in a dishwashing machine.

Continuous operation time

- The blender set allows quick and effective operation, but continuous operation time while using the blender attachment, whisk, mash making attachment and while chopping products in the processor bowl should not exceed 20-30 seconds. Make at least a two-minute break between operation cycles.

USING THE BLENDER ATTACHMENT

WARNING: Before assembling and installing attachments, make sure that the power plug is not inserted into the socket.

• Insert the blender attachment (1) into the motor unit (2), and turn it counterclockwise until bumping.
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl with products that you want to chop/mix.
• To switch the blender on, press and hold the button (4). Set the required operation speed using the control knob (5). Use this operation mode for mixing liquid products.
• If you press and hold the button (3), the unit will operate at maximum rotation speed. Use this operation mode for combined processing of liquid and solid products.

Note:

- Products should be put into the bowl before the unit is switched on. The amount of processed products should not exceed 2/3 of the capacity of the bowl in which the products are processed.

Before starting to chop/mix, we recommend to peel fruit, remove inedible parts, such as bones, and cut fruit into 2x2 cm cubes.

- After you finish using the unit, take the power plug out of the socket and remove the blender attachment (1), turning it clockwise.

Attention!

- Do not remove the blender attachment (1) during operation.

ENGLISH

• To avoid damaging the blades, do not process too solid products such as cereals, rice, spices, coffee beans, cheese, frozen products.
• When you use the blender attachment and the products are hard to chop, add some water, if it is possible.

USING THE WHISK

Use the whisk attachment (10) only to beat cream, make biscuit dough or for mixing ready desserts.

WARNING: Before assembling make sure that the power plug is not inserted into the mains socket.

• Insert the whisk (10) into the gear (9).
• Insert the whisk gear (9) into the motor unit (2), and turn it counterclockwise until bumping.
• Insert the power plug into the mains socket.
• Put the whisk (10) into the bowl with products.
• Set the required operation speed using the control knob (5).
• To switch the blender on, press and hold the button (4). Use this operation mode for mixing liquid products.
• If you press and hold the button (3), the unit will operate at maximum rotation speed.
• After you finish using the unit, take the power plug out of the socket, disconnect the whisk (10) from the gear (9) and disconnect the gear (9) from the motor unit (2) turning it clockwise.

Attention!

• Do not use the whisk (10) to make tight dough.
• Products should be put into the bowl before the unit is switched on.

USING THE MINI CHOPPER

The chopper is used to chop meat, cheese, onion, herbs, walnuts, almond, vegetables and fruit.

Attention!

Do not chop very solid products, such as nutmegs, coffee beans, cereals and ice.

Before you start chopping

• Cut meat, cheese, onion, vegetables and fruit into cubes approximately 2x2 cm in size.
• Remove stems of herbs, peel the nuts.
• Remove bones, sinews and cartilage from meat.
• To achieve the best results refer to the table below.

Product type Weight, g.		Approximate cooking time, seconds
Onion (cut into several pieces)	60	4-8
Soft fruit	100	10
Garlic	50	4-8
Bread (dried toast)	15	12
Cheese	30	12
Nuts	30	12
Eggs	80	8
Meat	80	8-12

Chopping

Caution: the knife is very sharp! Always hold the knife by the upper plastic end.

• Place the chopper bowl (6) on a flat stable surface.
• Set the chopping knife (7) on the axis of chopper bowl (6).
• Put the products into the chopper bowl (6).

Note:

• Do not switch the unit on when the chopper bowl (6) is empty.
• Put the lid (8) on the chopper bowl (6).
• Install the motor unit (2) on the geared lid (8) and rotate it clockwise until it is fixed.
• To connect the unit to the mains, insert the power cord plug into the mains socket.
• Set the required speed with the control knob (5).
• To switch the blender on, press and hold the button (4).

ENGLISH

• When the button (3) is pressed, the knife rotates at maximal rotation speed.
• During operation hold the motor unit (2) with one hand and the chopper bowl (6) with the other hand.
• After using the unit, wait till the chopping knife (7) fully stops.
• Unplug the unit.
• After using the chopper disconnect the motor unit (2) from the geared lid (8).
• Remove the geared lid (8).
• Carefully remove the chopping knife (7) taking it by the upper plastic end.
• Take the chopped products out of the chopper bowl (6).

Attention!

Strictly follow the described sequence of operations.

CLEANING

Attention! The blades of the chopping knife (7) are very sharp and dangerous. Handle the chopping knife (7) very carefully!

1. Unplug the unit before cleaning.
2. Use a slightly damp cloth to clean the motor unit (2) and the reduction gears (8, 9), then wipe them dry.
3. After processing of salty or sour products it is necessary to rinse the chopper knife (7) and the blender attachment (1) with water right after the use.
4. While possessing products with strong dyeing properties (for example, carrot or beet-root) the bowls or attachments can get colored, wipe the attachments or bowls with a cloth, dampened in vegetable oil.
5. Wash the attachments that will contact products with warm water and a neutral detergent and dry them thoroughly after use.

Do not immerse the motor unit (2) and the gears (7, 8) into any liquids, do not wash them under water jet or in a dishwashing machine.

Storage

• Clean and dry the unit thoroughly before taking it away for storage.
• Do not wind the power cord around the motor unit.
• Keep the blender set away from children in a dry cool place.

Delivery set

Motor unit – 1 pc. Blender attachment – 1 pc.

Whisk gear - 1 pc.

Whisk - 1 pc.

Geared lid - 1 pc.

Chopping knife - 1 pc.

Chopper bowl - 1 pc.

Measuring cup - 1 pc.

Measuring cup lid - 1 pc.

Instruction manual - 1 pc.

Technical specifications

Power supply: 220-240 V \~ 50 Hz

Power: 300 W

Maximal power: 700 W

The manufacturer reserves the right to change the specifications of the unit without a preliminary notification.

Unit operating life is 3 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

DEUTSCH

STABMIXER-SET

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE