Q: The iron constantly turns on and off, and steam only comes out when the indicator light is on, is this normal?

The cyclic on and off behavior of the indicator light is completely normal . According to the Supreme Steam Ultra manual, once the iron has reached the desired temperature, the light turns off, then automatically turns on and off to maintain the temperature via the thermostat. This is the intended operation of the product. However, the issue you describe regarding the steam only coming out when the light is on is not normal. The steam function, which produces 50 g/min , should be available once the iron has reached its operating temperature (regardless of the light cycles). If steam only comes out during the heating phase, this may indicate: A thermostat cycle that is too fast (the iron does not stay at temperature long enough) An internal problem with the steam system or the temperature sensor Recommendation: Since your iron is new and under a 2-year warranty, contact the retailer or Russell Hobbs directly for inspection or replacement. This is not expected behavior for a new iron.

Q: How to use the 'Soup' button on the RUSSELL HOBBS 21480-56 SOUP&BLEND blender?

The "Soup" button on the RUSSELL HOBBS 21480-56 SOUP&BLEND blender is designed to automatically prepare hot soups by blending and cooking your ingredients simultaneously. This function combines heating and blending in one step, delivering a smooth and hot soup without intervention. Preparation before use: Start by chopping your vegetables into pieces and placing them in the blender's container. Then pour in the broth, water, or any other liquid of your choice. Add spices and seasonings to your personal taste. Make sure to close the lid tightly to avoid splashes during operation. Starting the Soup program: First, plug the device into an electrical outlet, then press the "Soup" button. This program automatically adjusts the temperature and time needed to cook and blend your ingredients. Then start the cycle by pressing the start button. During operation: Once you have started the program, the blender operates automatically without needing supervision. The cycle usually lasts several minutes. You do not need to intervene or interrupt the process, as the system manages both blending and cooking. After the program: At the end of the cycle, wait a few seconds before opening the lid to let the steam escape. Check the consistency and temperature of your soup. If the texture is too thick for your liking, you can add a little extra liquid (water, broth, or cream) and restart the program if necessary. Important points to follow: Never exceed the maximum capacity indicated on the container to avoid overflow and splashes. For soups with more or less textured elements, the standard program allows you to achieve a completely smooth puree. You can also add fresh cream after the program for a creamier soup, according to your preferences.

Question 1

My RUSSELL HOBBS 2337056 coffee machine is not working after descaling - what should I do?

Accepted Answer

If your RUSSELL HOBBS 2337056 coffee machine is not working after descaling, the problem is likely due to an incomplete rinsing cycle. The descaling process for this machine consists of two mandatory phases: first, the vinegar self-cleaning cycle (approximately 45 minutes), followed by 2 to 3 complete rinses with pure water only to eliminate all vinegar residues. This rinsing step is often forgotten or insufficient.

Complete descaling steps: Fill the reservoir with 500 ml of white vinegar and 500 ml of water in the carafe, pour the mixture into the reservoir without exceeding the MAX mark, close the lid, place the carafe back on the hot plate, plug in the device, and then press the i button (the indicator lights up and the e icon appears). The machine will then execute its self-cleaning cycle. Once completed (approximately 45 minutes), the device will automatically turn off.

Essential rinsing phase: Now fill the reservoir only with pure water up to the MAX mark, and start a complete cycle without coffee and without vinegar. Wait for the machine to finish. Repeat this operation 2 or 3 more times with pure water only, until you no longer smell vinegar. This phase cleans the internal circuits and restores normal operation.

Checks after descaling: Ensure that the water reservoir is filled to the MAX mark, that the lid is properly closed and locked, and that the carafe is correctly placed on the hot plate. Check that the power button responds when pressed and that the indicator light illuminates. If the device does not respond at all, unplug it for 30 seconds and then plug it back in to reset the electronic system that may have been disrupted.

If the problem persists: Check that all components (filter, filter holder, carafe) are correctly in place. Manually clean the filter holder and carafe with soapy hot water and rinse them thoroughly to remove any soap or residue. For warranty-related issues, contact RUSSELL HOBBS customer service directly.

Question 2

How to reset or restart my RUSSELL HOBBS 2337056 coffee machine that is not working?

Accepted Answer

If your RUSSELL HOBBS 2337056 coffee machine is not functioning properly, here are the steps to try before a complete reset:

Basic Troubleshooting

Check that the water reservoir is filled to the MAX marking (maximum capacity: 1.25L)
Ensure that the device is properly plugged in and turned on
Wait a few seconds after pressing the ⚙ (Start) button to initiate the brewing cycle
If the machine stops automatically, this is normal: it turns off after 40 minutes of keeping warm

Complete Reset

The documentation for this machine does not specify a specific reset procedure by buttons or combinations. Generally, for this type of programmable coffee machine, try:

Unplug the device for 30 seconds, then plug it back in
Check that the time settings (hr/min buttons) are not incorrect, as they may block certain functions
Clean the interior according to the descaling procedure: use a mixture of 500ml of white vinegar + 500ml of water to remove limescale deposits that may block operation

If the device still does not restart after these steps, contact RUSSELL HOBBS support: the warranty covers 2 years from the date of purchase.

Question 3

The iron constantly turns on and off, and steam only comes out when the indicator light is on, is this normal?

Accepted Answer

The cyclic on and off behavior of the indicator light is completely normal. According to the Supreme Steam Ultra manual, once the iron has reached the desired temperature, the light turns off, then automatically turns on and off to maintain the temperature via the thermostat. This is the intended operation of the product.

However, the issue you describe regarding the steam only coming out when the light is on is not normal. The steam function, which produces 50 g/min, should be available once the iron has reached its operating temperature (regardless of the light cycles). If steam only comes out during the heating phase, this may indicate:

A thermostat cycle that is too fast (the iron does not stay at temperature long enough)
An internal problem with the steam system or the temperature sensor

Recommendation: Since your iron is new and under a 2-year warranty, contact the retailer or Russell Hobbs directly for inspection or replacement. This is not expected behavior for a new iron.

Question 4

How to use the RUSSELL HOBBS Chester 2067056 coffee machine to brew coffee?

Accepted Answer

Your RUSSELL HOBBS Chester 2067056 coffee machine is a filter coffee maker with a thermal carafe that has a capacity of 1.25 liters. Here’s how to use it correctly to brew coffee:

Before first use, fill the water reservoir up to the maximum mark and turn the machine on without coffee. Also rinse the carafe with hot water to preheat it, which prevents it from absorbing the heat from the coffee.

To prepare your coffee, follow these steps:

Remove the carafe from the base.
Use the insert to lift the lid and access the water reservoir.
Fill the reservoir with the exact amount of water needed (the reservoir has a maximum capacity of 1.25 liters).
Open a #4 filter and place it in the filter holder.
Pour 1 measure of ground coffee into the filter for each cup (about one tablespoon per cup).
Close the lid and press down to lock it properly.
Put the carafe back on the base.

To start and brew the coffee, press button 2: the button lights up and shortly after, the coffee begins to brew into the carafe. During brewing, you can stop the machine at any time by pressing button 2 again. Once brewing is complete (time varies depending on the amount of water), the device beeps 5 times in succession, then turns off automatically. Then set the switch to 0.

To pour your coffee, remove the carafe from the base and rotate the lid 90° to align the notch with the spout. After serving, close the lid. Important note: coffee beans retain some water, so the amount of liquid in the carafe will be slightly less than the amount of water poured into the reservoir.

Question 5

How do I remove the lid of the RUSSELL HOBBS coffee machine model 2337056?

Accepted Answer

To remove the lid of your RUSSELL HOBBS coffee machine model 2337056, follow these simple steps:

1. Safety first

Make sure the machine is unplugged from the electrical outlet to avoid any risk of electric shock.

2. Preparation

Remove the water reservoir if your model is equipped with one, to facilitate access to the lid.

3. Removing the fasteners

Examine the lid to locate any visible screws. Use an appropriate screwdriver to unscrew them.
Also look for clips or latches that may be holding the lid in place. Gently release them to avoid breaking.

4. Removing the lid

Once all fasteners are removed, gently lift the lid. If you feel resistance, check that no fastener has been overlooked.

Tip: Always handle the parts with care to avoid damaging the machine.

Question 6

Can the lid of the RUSSELL HOBBS Maxicook 2357056 rice cooker be removed for cleaning?

Accepted Answer

The lid of the RUSSELL HOBBS Maxicook 2357056 is removable and can be taken off for cleaning. However, certain precautions must be taken to properly maintain your appliance.

Cleaning method for the lid:

Remove the lid from the container after cooking and allow the appliance to cool down.
Wash the lid in warm soapy water with a soft sponge, then rinse and dry thoroughly.
Do not fully immerse the lid in water continuously, as it contains sensitive electronic components.
No part of the appliance, including the lid, should be washed in the dishwasher.

Also, wipe all surfaces of the base of the appliance with a damp, clean cloth. By following these instructions, you will ensure the durability and proper functioning of your rice cooker.

Question 7

What is the button to prepare soup on the RUSSELL HOBBS 21480-56 SOUP&BLEND blender?

Accepted Answer

On the RUSSELL HOBBS 21480-56 SOUP&BLEND soup maker, the button dedicated to soup preparation is located on the front control panel and is labeled "Soup". This appliance has 8 distinct automatic programs, including 2 soup options: chunky soup (with small pieces) and smooth soup (creamy preparation).

Steps to prepare a soup:

Cut your vegetables into medium-sized pieces
Place them in the stainless steel bowl (capacity 1.75L) with water or broth up to the fill line
Close the lid, ensuring it is securely locked (the lid has a convenient opening to add ingredients during cooking)
Press the "Chunky Soup" or "Smooth Soup" button depending on the desired texture
The appliance automatically manages cooking and blending: it first cooks the ingredients at the appropriate temperature, then finely blends them at the end of the cycle

The preparation cycle is fully automated. Temperature, time, and power settings are preset for each soup program. Once the cycle is complete (usually 15 to 20 minutes depending on the ingredients), pour your soup directly into a bowl. Let it sit for a few seconds before opening the lid to release the steam. You can add broth or water if you prefer a thinner consistency and restart a short blending cycle.

Practical tip: The SOUP&BLEND blender also has a warm keeping function that keeps your soup at temperature for 40 minutes after the cycle ends, ideal for preparing soup in advance.

Question 8

How to use the 'Soup' button on the RUSSELL HOBBS 21480-56 SOUP&BLEND blender?

Accepted Answer

The "Soup" button on the RUSSELL HOBBS 21480-56 SOUP&BLEND blender is designed to automatically prepare hot soups by blending and cooking your ingredients simultaneously. This function combines heating and blending in one step, delivering a smooth and hot soup without intervention.

Preparation before use: Start by chopping your vegetables into pieces and placing them in the blender's container. Then pour in the broth, water, or any other liquid of your choice. Add spices and seasonings to your personal taste. Make sure to close the lid tightly to avoid splashes during operation.

Starting the Soup program: First, plug the device into an electrical outlet, then press the "Soup" button. This program automatically adjusts the temperature and time needed to cook and blend your ingredients. Then start the cycle by pressing the start button.

During operation: Once you have started the program, the blender operates automatically without needing supervision. The cycle usually lasts several minutes. You do not need to intervene or interrupt the process, as the system manages both blending and cooking.

After the program: At the end of the cycle, wait a few seconds before opening the lid to let the steam escape. Check the consistency and temperature of your soup. If the texture is too thick for your liking, you can add a little extra liquid (water, broth, or cream) and restart the program if necessary.

Important points to follow: Never exceed the maximum capacity indicated on the container to avoid overflow and splashes. For soups with more or less textured elements, the standard program allows you to achieve a completely smooth puree. You can also add fresh cream after the program for a creamier soup, according to your preferences.

Question 9

How to prepare soup with the RUSSELL HOBBS 21480-56 SOUP&BLEND blender?

Accepted Answer

The RUSSELL HOBBS 21480-56 SOUP&BLEND blender is specially designed to prepare hot soups in one step thanks to its dedicated program. Here’s how to proceed:

Recommended ingredients:

Varied vegetables (carrots, potatoes, onions, zucchinis, etc.)
Broth (vegetable, chicken, or other according to your preference)
Spices and seasonings (salt, pepper, herbs)
Olive oil or cream (optional, to enrich the texture)

Preparation steps:

Prepare the vegetables: Wash, peel if necessary, and cut the vegetables into medium-sized pieces to ensure even cooking.
Place the ingredients in the blender: Put the vegetables in the blender bowl, then add the broth until the vegetables are covered.
Select the “Soup” program: Plug in the device, select the “Soup” program on the control panel. This program automatically heats and blends the ingredients.
Start the program: Press the start button. The blender will cook and blend the ingredients to obtain a hot and smooth soup.
Check the consistency: At the end of the program, open the lid and check the texture. If the soup is too thick, add a little broth and restart blending if necessary.
Serve: Pour the soup into bowls and enjoy. You can add toppings like fresh herbs, croutons, or a drizzle of cream according to your taste.

Additional tips:

For a creamier soup, add a bit of fresh cream or milk after cooking.
Experiment with different vegetables and spices to vary the flavors.
Do not fill the bowl beyond the maximum capacity indicated to avoid overflow.

User manual RUSSELL HOBBS : user manuals and guides in PDF

Models RUSSELL HOBBS most viewed

Browse manuals RUSSELL HOBBS by appliance type

Recent questions about devices RUSSELL HOBBS