Question 1

What do the 8 programs available on the SPORT ELEC MULTISPORT electrostimulation device mean?

Accepted Answer

The SPORT ELEC MULTISPORT electrostimulation device offers 8 programs designed to meet different muscular and athletic needs. Here is a general description of the functions associated with each program:

Program 1 (P1): Muscle strengthening to develop strength.
Program 2 (P2): Muscle toning aimed at improving muscle firmness.
Program 3 (P3): Active recovery to promote recovery after effort.
Program 4 (P4): Muscle massage to relax and relieve tension.
Program 5 (P5): Performance stimulation to optimize training.
Program 6 (P6): Muscle relaxation to soothe tired muscles.
Program 7 (P7): Preparation for effort to warm up muscles before activity.
Program 8 (P8): Rehabilitation or pain relief to assist in recovering from injuries.

Each program uses specific parameters of intensity, frequency, and duration tailored to its objective. It is advisable to choose the program based on your personal needs and to follow the usage instructions for optimal results.

Question 2

How do I turn on my SPORT ELEC MULTISPORT electrostimulation device that won't turn on?

Accepted Answer

If your SPORT ELEC MULTISPORT device does not turn on, the most common cause is an insufficiently charged or depleted battery. This device contains a rechargeable Ni-MH battery that must be charged for 12 hours before first use, and periodically after each use. First, check that you have correctly plugged the supplied charger into the device and a standard wall outlet: during charging, the battery indicator will gradually display 1/3, then 2/3, and finally 3/3 when the charge is complete. If not used for an extended period, recharge the device for 12 hours every 4 months to avoid complete battery discharge.

If the battery is very depleted, the device automatically goes into standby to protect it from excessive discharge. In this case, the procedure is simple: connect the supplied charger and let the device rest for at least 12 hours without using it during charging. Once fully charged, disconnect the charger and the screen will automatically turn off.

Once your device is properly charged, proceed to turn it on by making a brief press on the red ON/OFF button, maximum 1 second. This is a critical step: if your press is too long, the screen will flash and display all the icons, which does not indicate a malfunction but simply an incorrect press. All icons should display for 3 seconds, then the screen turns off and only the front muscles should flash, confirming that the device has turned on correctly.

If after a full 12-hour charge the device still does not turn on, check that you are only using the charger supplied with the device and that the wall outlet is functioning correctly (test it with another device). It may also be that the charging contacts between the device and the charger are dirty or oxidized: gently clean them with a dry cloth. If the problem persists despite these checks, there may be an internal defect in the battery or electronics, in which case contact a specialized technical service, as your device comes with a 3-year warranty.

Question 3

How to reset the SPORT ELEC SPORT PRO muscle electrostimulation device?

Accepted Answer

The SPORT ELEC SPORT PRO electrostimulation device does not have a factory reset function per se. The reset procedure involves performing a complete restart of the device after a total discharge.

Steps to reset your SPORT ELEC SPORT PRO:

Turn off the device by briefly pressing the ON/OFF button (red button) for a maximum of 1 second.
Disconnect the electrodes from their connector (CEV4 or CEV8) to avoid any accidental stimulation during handling.
Unplug the charging cable from the unit if the device was charging.
Wait 5 to 10 minutes to allow the rechargeable battery to fully discharge.
Turn the device back on by briefly pressing (less than 1 second) the ON/OFF button. You will see all the icons display for 3 seconds, then the front muscles will flash.

This procedure clears the temporary memory of the device and resets the settings of the last program. If after this operation the device still does not function properly (no display, no stimulation, malfunction of the buttons), check that the battery is sufficiently charged by connecting the provided charger for 12 hours.

In case of persistent issues despite this reset, it is recommended to contact SPORT ELEC customer service at 02 32 96 50 50 or return the device to your retailer, as the device is guaranteed for 2 years parts and labor.

Question 4

How to reset the SPORT ELEC MULTISPORT electrostimulation device?

Accepted Answer

To reset your SPORT ELEC MULTISPORT electrostimulation device, follow these steps:

Turn off the device ensuring it is completely powered down.
Disconnect the electrodes if they are connected.
Remove the batteries or the removable battery, if your model is equipped with one, and leave them out of the device for about 10 seconds.
Reinsert the batteries correctly.
Turn the device back on and check that the settings have returned to their default values.

This procedure generally resets the device and resolves some malfunctions related to the settings. If the problem persists, it may be helpful to contact SPORT ELEC customer service for more in-depth technical assistance.

User manual SPORT ELEC : user manuals and guides in PDF

Models SPORT ELEC most viewed

Browse manuals SPORT ELEC by appliance type

Recent questions about devices SPORT ELEC