Q: How to save a program on the BEHRINGER PRO800?

Backup Procedure To save your program on the BEHRINGER PRO800 : Press the REC button - it will start blinking, confirming that the recording mode is activated Dial a two-digit number to select the save location The program is immediately saved Important: The PRO800 has 400 locations spread over 4 program banks. If you save to a position that is already used, the previous program will be overwritten. Canceling the recording As long as the REC button is blinking, you can interrupt the save by pressing any other key.

Q: Is it possible to connect the BEHRINGER Tube Ultragain MIC500USB to an Android smartphone?

The BEHRINGER Tube Ultragain MIC500USB is not compatible with Android smartphones . This professional microphone preamp with USB audio interface is designed exclusively for Windows and Mac computers. This tube preamp uses a USB 2.0 type B connection (the square connector used on computers), while Android devices use USB-C or micro-USB ports. The MIC500USB also requires a 12 V DC external power supply via a power adapter, making it incompatible with the USB ports of mobile phones. In theory, you could try connecting the microphone via a USB-C to USB-B adapter cable and a powered USB hub, but this would very likely not work . The Android operating system would not automatically recognize this professional audio interface, as it has not been tested or certified for this operating system. Furthermore, even if recognition were possible, the specialized audio drivers for the MIC500USB are only available for Windows and Mac. The BEHRINGER Tube Ultragain MIC500USB is exclusively intended for professional recording on desktop or laptop computers. To record audio on an Android smartphone, you will need to use a microphone specifically designed for this use, with a USB-C connection or compatible with your mobile device.

Question 1

How to navigate the UBXa MINI without a screen?

Accepted Answer

The Behringer UB-Xa MINI has no screen by design — it is a compact analog synthesizer that is fully controlled via its physical buttons, knobs, and LED indicators. This direct approach allows you to modify parameters without on-screen menus, just like classic analog synths.

Navigation is largely done via the FUNCTION BUTTON (button 3). Hold this button while pressing other controls to access secondary functions and menu options. For example, to access sequencer modes or modify global parameters (tempo range, sync polarity, MIDI channel, etc.), you hold FUNC and press the corresponding key or button. The LEDs on the keyboard keys confirm which mode is active by lighting up.

To keep track of the synth's status without a screen, rely on the built-in LEDs. The TEMPO (control 4) has an internal LED that blinks at the speed of the tempo you have set (10 to 600 BPM depending on the menu). This visual LED allows you to immediately see the rhythm of your sequencer. The MODE SELECT (control 10) lets you switch between Polyphonic, Unison, Octave, Fifth, Ring Modulation, and the LEDs on the keyboard keys confirm the active mode. Similarly, during sequencing, the keyboard LEDs indicate which steps are active in the pattern.

To program the sequencer without a screen, you rely on the keyboard keys with LEDs and dedicated buttons. Hold FUNC and the PLAY/ACTIVE button (27) and slide your finger over the white keys of the keyboard to set the number of steps in your pattern. The keyboard LEDs then indicate which steps are recorded. You can record notes that auto-quantize to the nearest step, or use the Freestyle mode (FUNC + key 35) to record in real-time without quantization.

All sound parameters—VCO, LFO, filter, envelope—are adjusted via the physical knobs that directly control them. There is no screen to display precise values, but each control corresponds to its function (FREQ for filter frequency, ATTACK for attack time, etc.). This design forces you to listen to the changes rather than read a value, encouraging creative exploration of sound.

If you need to memorize a sequence or restore factory settings, these functions unlock by pressing FUNC + certain keyboard keys at startup. An optional metronome (accessible via FUNC + key 33) helps you keep the rhythm while recording. With a bit of practice, this minimalist interface becomes intuitive and allows you to create and tweak sounds without relying on a screen.

Question 2

How to save a program on the BEHRINGER PRO800?

Accepted Answer

Backup Procedure

To save your program on the BEHRINGER PRO800:

Press the REC button - it will start blinking, confirming that the recording mode is activated
Dial a two-digit number to select the save location
The program is immediately saved

Important: The PRO800 has 400 locations spread over 4 program banks. If you save to a position that is already used, the previous program will be overwritten.

Canceling the recording

As long as the REC button is blinking, you can interrupt the save by pressing any other key.

Question 3

Is it possible to connect the BEHRINGER Tube Ultragain MIC500USB to an Android smartphone?

Accepted Answer

The BEHRINGER Tube Ultragain MIC500USB is not compatible with Android smartphones. This professional microphone preamp with USB audio interface is designed exclusively for Windows and Mac computers.

This tube preamp uses a USB 2.0 type B connection (the square connector used on computers), while Android devices use USB-C or micro-USB ports. The MIC500USB also requires a 12 V DC external power supply via a power adapter, making it incompatible with the USB ports of mobile phones.

In theory, you could try connecting the microphone via a USB-C to USB-B adapter cable and a powered USB hub, but this would very likely not work. The Android operating system would not automatically recognize this professional audio interface, as it has not been tested or certified for this operating system. Furthermore, even if recognition were possible, the specialized audio drivers for the MIC500USB are only available for Windows and Mac.

The BEHRINGER Tube Ultragain MIC500USB is exclusively intended for professional recording on desktop or laptop computers. To record audio on an Android smartphone, you will need to use a microphone specifically designed for this use, with a USB-C connection or compatible with your mobile device.

Question 4

How to connect a microphone to the BEHRINGER MPA30BT speaker?

Accepted Answer

The Behringer MPA30BT offers two main solutions for connecting a microphone. For a wired microphone, use the combo INST/MIC IN jacks (INPUT 1 and INPUT 2) at the back of the unit. These jacks accept balanced XLR connectors, 6.35 mm balanced jacks, or 6.35 mm unbalanced jacks. Start by plugging the MPA30BT into a power outlet using the supplied IEC cable, then turn all the INPUT LEVEL potentiometers down to the minimum by turning them to the left.

Connect your wired microphone to the corresponding combo jack (INPUT 1 or INPUT 2), then press the POWER button to turn on the unit. Press the MUSIC/SPEECH selector by pushing it in if you are using the microphone for speaking (optimizes the equalization for voice); leave it released for music. While speaking into the microphone, slowly turn the corresponding INPUT LEVEL potentiometer to the right until you achieve a clear and undistorted sound. If the signal is too strong or distorted, slightly reduce the level.

For BEHRINGER wireless microphones, connect the USB receiver dongle into the WIRELESS SYSTEM USB jack. Important: this connection will automatically disable the combo INST/MIC IN jacks. Check that the WIRELESS SYSTEM LEDs light up green to confirm that the system is active. Follow the pairing procedure for your specific wireless microphone, then adjust the INPUT LEVEL in the same way as for a wired microphone.

Once your microphone is set up, adjust the main MAIN LEVEL potentiometer by turning it to the right until you reach a comfortable output level. If you are also streaming music via Bluetooth or the 3.5 mm MP3 input, use the BLUETOOTH/MP3 LEVEL potentiometer to adjust the volume of that audio source independently of the microphone. The unit can operate on mains power or its rechargeable internal battery, providing up to 20 hours of battery life.

User manual BEHRINGER : user manuals and guides in PDF

Models BEHRINGER most viewed

Browse manuals BEHRINGER by appliance type

Recent questions about devices BEHRINGER