WING RACK - Mixer BEHRINGER - Free user manual and instructions
Find the device manual for free WING RACK BEHRINGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mountable Digital Mixing Console |
| Brand | Behringer |
| Model | WING RACK |
| Number of Input Channels | 40 channels (32 mic/line + 8 line) |
| Number of Mix Buses | 16 mix buses + 8 effect buses |
| Touchscreen | 10-inch color touchscreen |
| Audio Processor | 40-bit floating point FPGA |
| Network Connectivity | Ethernet, USB, AES50 (64 channels) |
| Multitrack Recording | Up to 64 tracks via USB |
| Dimensions (W x H x D) | 482 x 133 x 400 mm (19 inches, 3U) |
| Weight | 9.8 kg |
| Power Supply | 100-240 VAC, 50/60 Hz, 150 W |
| Operating Temperature | 0°C to 40°C |
| Maintenance and Cleaning | Clean with a soft dry cloth. Do not use solvents. |
| Safety | Use a grounded power outlet. Avoid exposure to water or moisture. |
| Spare Parts and Repairability | Contact Behringer after-sales service. Some parts are available on request. |
| Warranty | 3 years |
| General Information | Made in China. Suitable for live and studio applications. |
Frequently Asked Questions - WING RACK BEHRINGER
How to connect the mixer to a computer?
Use a USB or Ethernet cable. The USB port allows recording up to 64 tracks simultaneously. The Ethernet port is used for remote control via WING-DANTE or WING-LIVE software.
What is the number of available outputs?
The WING RACK has 16 analog outputs (XLR) and 8 line outputs (jack). In addition, AES50 and USB outputs provide additional digital channels.
Can I use the WING RACK without a computer?
Yes, it is a standalone mixer. All settings are made from the touchscreen and physical controls. A computer is not required for basic operation.
Is the mixer compatible with Behringer X32 consoles?
Yes, thanks to AES50 connectivity, you can connect the WING RACK to an X32 or other compatible devices to expand the number of channels or create multicore systems.
How to update the firmware?
Download the latest firmware version from the Behringer website. Copy the file to a USB drive, plug it into the console, and follow the on-screen instructions in the 'System' > 'Update' menu.
What to do if the touchscreen stops responding?
Try restarting the console by powering it off and on. If the problem persists, perform a factory reset via the 'Setup' > 'Factory Reset' menu. Note: this erases all settings.
What audio formats are supported for USB recording?
The WING RACK records in WAV format (48 kHz, 24-bit) onto a USB drive formatted in FAT32. Up to 64 simultaneous tracks.
How to configure the built-in effects?
Effects are accessible from the touchscreen in the 'FX' section. You can load effects onto effect buses (FX1 to FX8) and assign them to channels via sends. Presets are available.
Can I use the WING RACK with MIDI devices?
Yes, the console has MIDI In/Out ports. You can use it to control external equipment or synchronize sequences.
Where to find the complete user manual?
The complete manual is available for free download in PDF format on notice-facile.com and on the official Behringer website. It contains all technical details and procedures.
User questions about WING RACK BEHRINGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual WING RACK - BEHRINGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WING RACK by BEHRINGER.
USER MANUAL WING RACK BEHRINGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEHRINGER
Model : WING RACK
Category : Mixer