Q: How to cook a frozen pizza with the SAGE Smart Oven Air Fryer BOV860?

Here’s how to cook a frozen pizza with your SAGE BOV860: Step-by-step procedure Turn the Function dial (≡) to the Pizza position. The temperature will display at 210 °C convection , which is ideal for a frozen pizza. The Frozen button (✝) is automatically available in Pizza mode: press it to adjust the cooking time for frozen foods (preset to about 15 minutes). Press the Start/Cancel button (Ⓞ) : the oven will preheat automatically and you will receive an audible signal once ready. Place your frozen pizza in the center of the metal rack provided with the appliance (capacity up to 30 cm in diameter). During cooking, turn the pizza 180° halfway through for even cooking and a uniformly golden crust. At the end of the programmed time, the oven will stop automatically. Tips for better results The convection function is enabled by default in Pizza mode, ensuring even heat distribution thanks to the 6 Element IQ™ heating elements. If your pizza is very thick or if you prefer a more golden crust, you can adjust the temperature up to 230 °C maximum and extend the cooking time (up to 1 hour available in Pizza mode). If you do not activate the Frozen button, the default time remains 15 minutes at 210 °C, which will suit most standard frozen pizzas.

Question 1

How to download the instruction manual for the SAGE SES875 in Italian?

Accepted Answer

The SAGE SES875 offers its complete manual in Italian. Here’s how to access it:

Download the PDF in Italian

The PDF viewer at the top of this page displays the manual (160 pages) with a language selector
Click on the globe or flag icon to choose the language Italiano
Then click on the download icon (downward arrow) to save the PDF to your computer

The manual covers the installation of the water filter, the operation of the machine (54 mm grinder with grind setting, 15 bar pump), steam/hot water functions, maintenance, descaling, and complete troubleshooting. All these details are available in the Italian version.

If you encounter a display issue, try right-clicking on the viewer and selecting 'Save' or 'Download'.

Question 2

How to cook a frozen pizza with the SAGE Smart Oven Air Fryer BOV860?

Accepted Answer

Here’s how to cook a frozen pizza with your SAGE BOV860:

Step-by-step procedure

Turn the Function dial (≡) to the Pizza position.
The temperature will display at 210 °C convection, which is ideal for a frozen pizza.
The Frozen button (✝) is automatically available in Pizza mode: press it to adjust the cooking time for frozen foods (preset to about 15 minutes).
Press the Start/Cancel button (Ⓞ): the oven will preheat automatically and you will receive an audible signal once ready.
Place your frozen pizza in the center of the metal rack provided with the appliance (capacity up to 30 cm in diameter).
During cooking, turn the pizza 180° halfway through for even cooking and a uniformly golden crust.
At the end of the programmed time, the oven will stop automatically.

Tips for better results

The convection function is enabled by default in Pizza mode, ensuring even heat distribution thanks to the 6 Element IQ™ heating elements.
If your pizza is very thick or if you prefer a more golden crust, you can adjust the temperature up to 230 °C maximum and extend the cooking time (up to 1 hour available in Pizza mode).
If you do not activate the Frozen button, the default time remains 15 minutes at 210 °C, which will suit most standard frozen pizzas.

Question 3

Why does the pump turn off after 1-2 seconds of starting?

Accepted Answer

If your SAGE BAMBINO pump starts and then stops immediately, here are the most common causes:

1. Insufficient water level

The removable tank has a capacity of 1.9 L. Make sure you have filled it up to the MAX mark. A low level will trigger the pump's safety shut-off. Also, ensure that the tank is properly secured in place.

2. Improperly prepared water filter

If you have recently replaced the water filter (to be changed every 3 months), it must first be before installation. A dry or improperly inserted filter will cause the pump to stop immediately. Check that the filter holder is properly aligned with the tank adapter.

3. Cleaning cycle in progress

After every 200 extractions, the 1 CUP and 2 CUPS buttons will blink. The machine then activates its automatic cleaning cycle with the provided tablets. Wait for the cycle to finish.

4. Descaling needed

When the 1 CUP, 2 CUPS, and STEAM buttons blink alternately, descaling is necessary. Fill the tank up to the DESCALE mark with water and descaling product, then press 1 CUP + STEAM simultaneously for 5 seconds. A buildup of limescale can also prematurely block the pump.

Quick diagnosis

Start by completely filling the tank and try again. If the pump continues to turn off after 1-2 seconds and the tank is full, check the condition of the water filter and initiate a descaling cycle. If the problem persists, a technical fault with the pump may be the cause.

User manual SAGE : user manuals and guides in PDF

Models SAGE most viewed

Browse manuals SAGE by appliance type

Recent questions about devices SAGE