Q: How to register a handset on the BigTel 1500?

Here’s how to register a handset on your Amplicomms BigTel 1500 : Registration Procedure Activate registration mode - Press and hold the paging key on the base station for about 5 seconds Access the Registration menu - Press OK and use the arrow keys to navigate to "Registration", then press OK Select the base station - Choose which base you want to register the handset to Enter the PIN code - Enter the 4-digit system PIN code (the default code is 0000 ) Confirm - Press OK to complete the registration Successful registration: You will hear a confirmation beep and the handset icon will stop flashing on the base station screen. Note: Your handset and base station come pre-registered from the factory. You only need this procedure if the registration has been lost or if you are adding additional handsets. The system supports up to 4 handsets per base station.

Q: Where is the Menu button on the BigTel 1280?

The Menu/Select button on your BigTel 1280 is the button number 4 on the handset. How to use it In standby mode : press the button 4 to open the main menu and access the phone functions In the menu : use the same button to select a menu item or to save your choice Additional navigation keys Arrow keys (up/down): move the cursor in the lists OK button : confirm a selection C/8 button : exit the menu or go back The system automatically returns to standby mode after 30 seconds of inactivity.

Question 1

How to register a handset on the BigTel 1500?

Accepted Answer

Here’s how to register a handset on your Amplicomms BigTel 1500:

Registration Procedure

Activate registration mode - Press and hold the paging key on the base station for about 5 seconds
Access the Registration menu - Press OK and use the arrow keys to navigate to "Registration", then press OK
Select the base station - Choose which base you want to register the handset to
Enter the PIN code - Enter the 4-digit system PIN code (the default code is 0000)
Confirm - Press OK to complete the registration

Successful registration: You will hear a confirmation beep and the handset icon will stop flashing on the base station screen.

Note: Your handset and base station come pre-registered from the factory. You only need this procedure if the registration has been lost or if you are adding additional handsets. The system supports up to 4 handsets per base station.

Question 2

Where is the Menu button on the BigTel 1280?

Accepted Answer

The Menu/Select button on your BigTel 1280 is the button number 4 on the handset.

How to use it

In standby mode: press the button 4 to open the main menu and access the phone functions
In the menu: use the same button to select a menu item or to save your choice

Additional navigation keys

Arrow keys (up/down): move the cursor in the lists
OK button: confirm a selection
C/8 button: exit the menu or go back

The system automatically returns to standby mode after 30 seconds of inactivity.

Question 3

Where can I get a replacement battery for the PowerTel M9500?

Accepted Answer

The PowerTel M9500 is equipped with a rechargeable lithium-ion battery. The manufacturer Amplicomms offers replacement batteries available as optional accessories for this model.

To obtain a compatible battery:

Contact Amplicomms directly via their website www.amplicomms.com, where you will find the exact references and ordering conditions for replacement batteries
Consult the complete documentation of the phone, which contains the specific battery references and available capacities
Check with authorized Amplicomms dealers in your area

When placing your order, be sure to mention the exact model (PowerTel M9500) to receive a guaranteed compatible battery. The initial charge should last at least 4 hours.

User manual Amplicomms : user manuals and guides in PDF

Models Amplicomms most viewed

Browse manuals Amplicomms by appliance type

Recent questions about devices Amplicomms