BH-600 - Écouteurs sans fil NOKIA - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Casque Bluetooth sans fil
Caractéristiques techniques principales	Son stéréo, réduction de bruit active, commandes tactiles
Alimentation électrique	Batterie rechargeable via USB-C
Dimensions approximatives	180 x 160 x 70 mm
Poids	250 g
Compatibilités	Compatible avec tous les appareils Bluetooth
Type de batterie	Batterie lithium-ion
Tension	3.7 V
Puissance	20 mW
Fonctions principales	Écoute de musique, appels mains libres, assistant vocal
Entretien et nettoyage	Nettoyer avec un chiffon doux, éviter l'eau
Pièces détachées et réparabilité	Réparabilité limitée, pièces non facilement remplaçables
Informations générales utiles	Autonomie de la batterie jusqu'à 20 heures, temps de charge 2 heures

FOIRE AUX QUESTIONS - BH-600 NOKIA

Comment connecter mon Nokia BH-600 à mon smartphone ?

Pour connecter votre Nokia BH-600 à votre smartphone, activez le Bluetooth sur votre téléphone, puis appuyez sur le bouton d'alimentation du BH-600 pendant 5 secondes jusqu'à ce que le voyant clignote. Dans les paramètres Bluetooth de votre téléphone, recherchez les appareils disponibles et sélectionnez 'Nokia BH-600' pour établir la connexion.

Comment charger les écouteurs Nokia BH-600 ?

Pour charger les écouteurs Nokia BH-600, utilisez le câble USB fourni. Connectez l'extrémité USB à un port USB d'ordinateur ou à un adaptateur secteur, puis branchez l'autre extrémité dans le port de charge des écouteurs. Le voyant de charge s'allumera en rouge pendant la charge et s'éteindra une fois complètement chargé.

Que faire si le son est faible ou interrompu ?

Si le son est faible ou interrompu, vérifiez que le volume de votre appareil est réglé à un niveau approprié. Assurez-vous également que le BH-600 est suffisamment chargé et que les écouteurs ne sont pas trop éloignés de l'appareil. Essayez de désactiver puis de réactiver le Bluetooth sur votre appareil.

Comment réinitialiser les écouteurs Nokia BH-600 ?

Pour réinitialiser les écouteurs Nokia BH-600, éteignez-les d'abord. Ensuite, maintenez enfoncés les boutons d'alimentation et de volume + pendant environ 5 secondes jusqu'à ce que le voyant clignote en rouge et bleu. Cela réinitialisera les paramètres d'usine des écouteurs.

Les écouteurs Nokia BH-600 sont-ils résistants à l'eau ?

Les écouteurs Nokia BH-600 ne sont pas spécifiquement conçus pour être résistants à l'eau. Il est recommandé de les garder à l'écart de l'eau et de l'humidité pour éviter tout dommage.

Comment savoir si mon Nokia BH-600 est en mode appairage ?

Lorsque le Nokia BH-600 est en mode appairage, le voyant LED clignote alternativement en rouge et bleu. Si le voyant ne clignote pas, essayez de le mettre en mode appairage en maintenant le bouton d'alimentation enfoncé pendant environ 5 secondes.

Que faire si mon Nokia BH-600 ne se connecte pas à mon appareil ?

Si votre Nokia BH-600 ne se connecte pas, essayez d'éteindre et de rallumer les écouteurs ainsi que votre appareil Bluetooth. Vérifiez également que le BH-600 est suffisamment chargé et que votre appareil est à portée. Si le problème persiste, réinitialisez les écouteurs.

Comment utiliser les commandes de mon Nokia BH-600 ?

Pour utiliser les commandes de votre Nokia BH-600, utilisez le bouton d'alimentation pour répondre aux appels ou mettre en pause/lecture de la musique. Les boutons de volume + et - vous permettent d'ajuster le niveau sonore. Appuyez deux fois sur le bouton d'alimentation pour passer à la piste suivante.

MODE D'EMPLOI BH-600 NOKIA

Nokia Bluetooth Headset BH-600

1 2 3 4 5 6

Illustration of a medical or laboratory device with a blue arrow pointing to a tool, labeled with number 7 (no text or symbols on the device itself)

Issue 1

DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HS-59W is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.

CE0681

© 2006 Nokia. All rights reserved.

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document.

Introduction

Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Introduction

The Nokia Bluetooth Headset BH-600 allows you to make and receive calls while on the move. You can use the headset with compatible phones that support Bluetooth wireless technology. Read this user guide carefully before using the headset. Also read the user guide for your phone,

which provides important safety and maintenance information. Keep the headset out of reach of small children.

Bluetooth wireless technology

Bluetooth wireless technology allows you to connect compatible devices without cables. A

Bluetooth connection does not require that the phone and the headset be in line of sight, but both devices should be within 10 meters (30 feet) of each other. Connections may be subject to interference from obstructions, such as walls, or other electronic devices.

The headset complies with the Bluetooth Specification 2.0 that

supports the Headset Profile 1.1 and Handsfree Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Get started

The headset contains the following parts shown on the title page: multifunction key (1), green indicator light (2), charging socket (3), volume keys (4), earloop (5), and microphone (6).

Before using the headset, you must charge the battery and pair a compatible phone with the headset.

Note: Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.

Chargers

Check the model number of any charger before using it with this device. The headset is intended for use with the AC-3, AC-4, and DC-4 chargers.

Warning: Use only chargers approved by

Nokia for use with this particular enhancement. The use of any other types may invalidate any

approval or warranty and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Charge the battery

The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device, as you may damage the device.

1. Connect the charger to a wall outlet.
2. Connect the charger to the headset (7). The indicator light

220is continuously displayed during charging. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours.

1. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet.

The fully charged battery has power for up to 7 hours of talk-time or up to 220 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth

devices, usage settings, usage styles, and environments.

When battery power is low, the indicator light flashes fast.

Switch the headset on or off

To switch on, press and hold the multifunction key until the indicator light turns on and the headset beeps.

To switch off, press and hold the multifunction key until the indicator light rapidly flashes four times and then turns off.

Pair the headset

1. When the headset is off, press and hold the multifunction key until the indicator light is continuously displayed.

Basic use

1. Switch on your compatible phone.
2. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.
3. Select the headset from the list of found devices.
4. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones

you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.

If the pairing is successful, the indicator light starts to flash slowly, and the headset appears in the phone menu where you can view the currently paired Bluetooth devices.

The headset is now ready for use.

Basic use

Wear the headset

Slide the earloop behind your ear (8), and push or pull the earloop to set its length. Point the headset

toward your mouth. To use the headset on the left ear, gently flip (9) and rotate the earloop (10).

Call handling

To make a call, use your phone in the normal way when the headset is connected to your phone.

If your phone supports last number redialing with this device, press the multifunction key when no call is in progress.

If your phone supports voice dialing with this device, briefly press the multifunction key when no call in progress, and proceed as described in the user guide of your phone.

To answer or end a call, briefly press the multifunction key. If you do not want to answer the call, press the multifunction key.

To answer another call during a call (and put the active call on hold) or switch between the two calls, press the multifunction key.

Adjust the earphone volume

Press the plus key (+) to increase or the minus key (-) to decrease the volume.

Mute the microphone

Press both volume keys at the same time during a call. When muted, the headset beeps at regular intervals.

To unmute the microphone, press both volume keys at the same time, or end the call.

Battery information

Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

Never use any charger that is damaged.

Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15^ and 25^ (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.

• Keep all accessories and enhancements out of the reach of small children.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can

shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

Care and maintenance

All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.