BH-202 - Écouteurs sans fil NOKIA - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Écouteur sans fil Bluetooth
Marque	Nokia
Modèle	BH-202
Technologie sans fil	Bluetooth 2.0+EDR
Profils Bluetooth	Headset 1.0, Handsfree 1.5
Autonomie en communication	Jusqu'à 10 heures
Autonomie en veille	Jusqu'à 200 heures
Temps de charge	Jusqu'à 2 heures 30 minutes
Type de batterie	Batterie rechargeable intégrée (non amovible)
Microphone	Intégré
Touche multifonction	Oui (marche/arrêt, appels, appairage)
Touches de volume	Oui (deux touches)
Type d'écouteur	Intra-auriculaire avec boucle d'oreille
Fonctions principales	Répondre/terminer les appels, recomposition du dernier numéro, numérotation vocale (selon le téléphone)
Entretien et nettoyage	Nettoyer avec un chiffon doux et sec. Éviter l'humidité. Ne pas utiliser de produits chimiques agressifs.
Sécurité	Utiliser uniquement des chargeurs Nokia approuvés. Ne pas exposer à des températures extrêmes. Ne pas ouvrir l'appareil. Garder hors de portée des enfants.
Pièces détachées et réparabilité	Batterie non amovible. Réparation uniquement par un centre de service agréé Nokia.
Informations générales	Notice d'utilisation incluse. Compatible avec les téléphones Bluetooth. Portée maximale de 10 mètres.

FOIRE AUX QUESTIONS - BH-202 NOKIA

Comment appairer l'écouteur Nokia BH-202 avec mon téléphone ?

Assurez-vous que l'écouteur est éteint. Maintenez la touche multifonction enfoncée pendant environ 8 secondes jusqu'à ce que le voyant reste allumé en continu. Activez le Bluetooth sur votre téléphone et recherchez les appareils. Sélectionnez 'Nokia BH-202' dans la liste et entrez le code 0000. L'appairage est réussi si le voyant clignote 5 fois.

Comment charger la batterie de l'écouteur ?

Connectez le chargeur (Nokia AC-3, AC-4 ou DC-4) à une prise murale, puis branchez le câble au connecteur de charge de l'écouteur. Le voyant s'allume pendant la charge. La charge complète prend jusqu'à 2 heures 30 minutes. Le voyant s'éteint lorsque la batterie est pleine.

Quelle est l'autonomie de l'écouteur ?

L'autonomie en communication peut atteindre 10 heures et en veille jusqu'à 200 heures. Les performances peuvent varier selon le téléphone utilisé, les réglages et l'environnement.

Que faire si l'écouteur ne s'allume pas ?

Assurez-vous que la batterie est chargée. Branchez le chargeur et vérifiez que le voyant s'allume. Si le voyant clignote rapidement, la batterie est faible. Si l'écouteur ne répond toujours pas, essayez de le réinitialiser en le branchant au chargeur pendant quelques minutes.

Comment porter l'écouteur sur l'oreille gauche ?

Faites glisser la boucle d'oreille derrière votre oreille. Pour l'utiliser à l'oreille gauche, retirez délicatement la boucle, retournez-la et faites-la pivoter avant de la remettre en place. Orientez l'écouteur vers votre bouche.

Comment régler le volume ?

Utilisez les touches de volume situées sur l'écouteur. Appuyez sur la touche '+' pour augmenter le volume et sur la touche '-' pour le diminuer pendant un appel.

Comment répondre ou terminer un appel ?

Appuyez brièvement sur la touche multifonction pour répondre à un appel entrant. Pour terminer un appel, appuyez à nouveau brièvement sur la même touche. Pour refuser un appel, maintenez la touche enfoncée.

Comment utiliser la numérotation vocale ?

Si votre téléphone prend en charge la numérotation vocale, appuyez brièvement sur la touche multifonction lorsqu'aucun appel n'est en cours. Suivez ensuite les instructions de votre téléphone pour prononcer le nom du contact.

Que signifie le voyant lumineux ?

Le voyant vert a plusieurs significations : allumé en continu pendant l'appairage ou la charge ; clignotement rapide lorsque la batterie est faible ; 5 clignotements après un appairage réussi ; éteint une fois la charge terminée ou l'écouteur éteint.

Comment nettoyer l'écouteur ?

Utilisez un chiffon doux et sec pour nettoyer l'écouteur. Évitez l'humidité et les liquides. Ne pas utiliser de produits chimiques agressifs ou de solvants. Gardez l'écouteur à l'abri de la poussière et des températures extrêmes.

MODE D'EMPLOI BH-202 NOKIA

Nokia Bluetooth Headset BH-202

Issue 1

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this HS-38W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/.

C€0889

© 2006 Nokia. All rights reserved.

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.

Export Controls

This device may contain commodities, technology or software subject to export

laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Introduction

The Nokia Bluetooth Headset BH202 allows you to make and receive calls while on the move. You can use the headset with compatible phones that support Bluetooth wireless technology.

Read this user guide carefully before using the headset. Also read the user guide for your phone, which provides important safety and maintenance information. Keep the headset out of reach of small children.

Bluetooth wireless technology

Bluetooth wireless technology allows you to connect compatible devices without cables. A Bluetooth connection does not require that the

phone and the headset be in line of sight, but both devices should be within 10 meters (30 feet) of each other. Connections may be subject to interference from obstructions, such as walls, or other electronic devices.

The headset complies with the Bluetooth Specification 2.0 + EDR that supports the Headset Profile 1.0 and Handsfree Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

The headset contains the following parts shown on the title page: green indicator light (1), multifunction key (2), charger connector (3), microphone (4), volume keys (5), and earloop (6).

Before using the headset, you must charge the battery and pair the headset with a compatible phone.

Note: Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.

Chargers

Check the model number of any charger before using it with this device. The

headset is intended for use with the AC-3, AC-4, and DC-4 chargers.

Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Charge the battery

The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device, as you may damage the device.

1. Connect the charger to a wall outlet.
2. Connect the charger cable to the headset (7). The indicator light is on while charging. It may take a while before charging starts. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours 30 minutes.
3. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet.

The fully charged battery has power for up to 10 hours of talk-time or up to 200 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments.

When battery power is low, the indicator light flashes quickly.

Switch the headset on or off

To switch on, press and hold the multifunction key until the indicator light is displayed.

To switch off, press and hold the multifunction key until the indicator light briefly flashes several times and turns off.

Pair the headset

1. Ensure that your phone is switched on and that the headset is switched off.
2. Press and hold the multifunction key (for about 8 seconds) until the indicator light is continuously displayed.
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.

Basic use

1. Select the headset from the list of found devices.
2. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.

If the pairing is successful, the indicator light briefly flashes five times, and the headset appears in the phone menu where you can view the currently paired Bluetooth devices.

The headset is now ready for use.

Basic use

Wear the headset

Slide the earloop behind your ear, and point the headset toward your mouth. To use the headset on the left ear, gently flip (8) and rotate the earloop (9).

Call handling

To make a call, use your phone in the normal way when the headset is connected to your phone.

If your phone supports last number redialing with the headset, press and hold the multifunction key (when no call is in progress) until you hear a beep.

If your phone supports voice dialing with the headset, briefly press the multifunction key when no call in progress, and proceed as described in the user guide of your phone.

Battery information

To answer or end a call, briefly press the multifunction key. If you do not want to answer the call, press and hold the multifunction key.

To adjust the earphone volume, press either volume key.

Battery information

Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

Never use any charger that is damaged. Leaving the device in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15^ and 25^ (59^ and 77^) . A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.

• Keep all accessories and enhancements out of the reach of small children.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.