ERGOCOACH - Appareil de fitness KETTLER - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil ERGOCOACH KETTLER au format PDF.
| Intitulé | Description |
|---|---|
| Type de produit | Vélo d'appartement |
| Caractéristiques techniques principales | Résistance magnétique, écran LCD, capteurs de fréquence cardiaque |
| Alimentation électrique | Alimentation par secteur |
| Dimensions approximatives | Longueur : 120 cm, Largeur : 60 cm, Hauteur : 140 cm |
| Poids | Poids total : 30 kg |
| Compatibilités | Compatible avec applications de fitness via Bluetooth |
| Type de batterie | Non applicable |
| Tension | 220-240 V |
| Puissance | Non spécifiée |
| Fonctions principales | Suivi de la distance, du temps, des calories brûlées et de la fréquence cardiaque |
| Entretien et nettoyage | Essuyer avec un chiffon humide, vérifier les vis et les pièces mobiles régulièrement |
| Pièces détachées et réparabilité | Disponibilité de pièces de rechange via le service client KETTLER |
| Sécurité | Équipement conforme aux normes de sécurité européennes, utilisation sur surface plane recommandée |
| Informations générales utiles | Garantie de 2 ans, poids maximum de l'utilisateur : 130 kg |
FOIRE AUX QUESTIONS - ERGOCOACH KETTLER
Questions des utilisateurs sur ERGOCOACH KETTLER
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Appareil de fitness au format PDF gratuitement ! Retrouvez votre notice ERGOCOACH - KETTLER et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil ERGOCOACH de la marque KETTLER.
MODE D'EMPLOI ERGOCOACH KETTLER
KETTLER
EDITION
Montageanleitung für Rudererät „ERGOCOACH"
Art.-Nr. 07985-800
Der Umwelt zuliebe: Wir drucken auf 100% Altpapier!
Assembly Instructions
Before assembling or using the unit, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts.
For Your Safety
The unit should be used only for its intended purpose, i.e. for physical exercise by adult persons.
Any other use of the equipment is prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment.
This unit has been designed in accordance with the latest standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible.
Incorrect repairs and structural modifications (e.g. removal or replacement of original parts) may endanger the safety of the user.
Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. Use only original KETTLER spare parts.
If the equipment is in regular use, check all its components thoroughly every 1 - 2 months. Pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handelbars.
To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regularly (once a year) by specialist retailers.
Instruct persons using the equipment (in particular children) on possible sources of danger during exercising.
The unit requires a power supply of 220-230 V/50 Hz. It should be connected only to a safety socket with a single 10-A fuse. Before commissioning the appliance pay attention to the fact that the correct plug-in power supply unit (observe marking) has been connected properly.
Important: Do not under any circumstances carry out electrical repairs or alterations yourself. Always ensure that such work is done by a properly qualified electrician.
Handling the equipment
Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.
The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.
The unit complies with the EN 975-1 +A1:1998; EN 975-7:1998, class SA.
The appliance has undergone Class S (= studio) testing. If the appliance is not intended for domestic use, please note that the onus is on the owner to ensure that the appropriate measures are put in place with respect to accessibility and supervision. The appliance may only be operated in public places under qualified supervision. The scope of such supervision shall de
Instructions for Assembly
■ Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
Important: disconnect the apparatus from the mains before doing repair, maintenance or cleaning work.
- Do not use a multiple power socket for the running belt. If an extension cable is being used, ensure that it complies with the VDE regulations.
When the unit is not in use, unplug it from the power supply.
■ Ensure that the power cable is not pinched and that no-one can trip over it.
■ All electric appliances emit electromagnetic radiation when in operation. Please do not leave especially radiation-intensive appliances (e.g. mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e.g. pulse measurement).
Before beginning your program of exercise, consult your doctor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health!
Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained by KETTLER.
Always observe the general safety rules and precautions for working with electrical equipment.
Before beginning your program of training, study the instructions for training carefully.
Our products are subject to a constant innovative quality assurance. We reserve the right to perform technical modifications.
In case of enquiry, please contact your KETTLER dealer.
Attention! The unit should be positioned in such a way that there is a space of 100cm on both sides and 150cm behind it.
pend on who the users are: their degree of reliability, age, experience, etc.
Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.
A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation.
The unit has a magnetic brake system.
The equipment is independent of revolutions per minute.
Please ensure that liquids or perspiration never enter the machine or the electronics.
Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly.
Always wear suitable shoes when using.
- Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment.
The product is not suitable for use by persons weighing over 130 kg.
Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.
Assembly Instructions
The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented.
Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.
- Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as
List of spare parts
When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see spare parts drawing).
Example order: Art. no. 07985-800 / spare-part no. 10100016 / 2 pieces / S/N......
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
instructed. The required tools are supplied with the equipment.
- Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
should be clearly stated on the order by adding the words "with fastening material".
GB KETTLER GB Ltd. · KETTLER House, Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL
KETTLER International Inc. · P.O. Box 2747 · Virginia Beach, VA 23450-2747
http://www.kettler.net
Checkliste (Packungsinhalt)
GB Checklist (contents of packaging)
F Lieste de vérification (contenu de l'emballage)
NL Checklijst (verpakkingsinhoud)
E Listadecontrol的内容ido del paquete)
1 Listadi controllo (contenuto del pacco)
PL Listakontrolna (zawartosc opakowania)
| 13x410mm | 1 | |
| 13x310mm | 1 | |
| M6x90 | 1 | |
| M8x45 | 2 | |
| M5x40 | 1 | |
| ø12 | 1 | |
| ø6,3/ø16 | 2 | |
| ø8,3/ø16 | 2 | |
| ø25 | 4 | |
| 110mm | 2 | |
| 40mm | 2 | |
| ø20x10mm | 2 | |
| M8 | 4 | |
| M5 | 1 | |
| M6 | 1 |
1
3
5
2
4
6
Handhabungshinweis
GB Handling
F Indication relative à la manipulation
NL Bedieningsinstruktie
Achtung! Betrieb nur mit mitgeliefertem Original-Netzteil oder Original-KETTLER-Ersatzteil (siehe Ersatzteilliste) zulässig. Ansonsten Gefahr der Beschädigung.
Attention! Only use with original power unit as supplied, or with original KETTLER spare part (see spare part list). Otherwise this may result in damage.
Attention! Exploiter uniquement l'appareil avec son bloc secteur original qui fait partie de la fourniture ou une piece de rechange originale de KETTLER (voir liste des pieces de rechange). Sinon risque de détérioration.
Let op! Gebruik alleen toegestaan met de bijgeleverde orginele transformator of orgineel KETTLER-onderdeel (zie onder-delenlijst). Anders gevaar voor beschadiging.
E Instrucciones de manejo
1 Avertenze per il maneggio
PL Wskazówki obstugowe
EjAtencion! Funcionamento solamente autorizo con la fuente de alimentacion original suministrada o con pieza de recambio original de KETTLER (ver lista de piezas de recambio). De lo contrario podra occasionar daños.
1 Attenzione! L'utilizzo è consentito soltanto con l'alimentatore originale fornito in dotazione oppure con parte di ricambio originale della KETTLER (vedasi lista delle parti di ricambio). Altrimenti sussiste il rischio di danneggiamenti.
Uwaga! Eksploatacja urzqdzenia jest möglicha tylko z dostarczonym oryginalnym zasilaczem lub z oryginalnym urzqdzeniem zastepczym marki KETTLER (patrz ? lista czeci zamiennych). W przyciwnym razie istmieje rzyky uszkodzenia.
Ersatzteilzeichnung
Ersatzteilzeichnung und -liste
GB Spare parts drawing and list
F Dessin et liste des pieces de rechange
NL Reserveonderdeeltekening en -lilst
E Designación y lista de las piezas de recambio
1 Disegno ed elenco dei pezioni di ricambio
PL Rysunek i lista czeci zamiennych
| Teil Nr. | Bezeichnung | Stück | Ersatztein-Nr. für 07985-800 |
| 1 | Tragbalken 1260 mm | 1 | 94314240 |
| 2 | Einschobblech | 3 | 97200160 |
| 3 | HD-PE Distanzrollichen 20x6.4x10 mm | 4 | 10108032 |
| 4 | Fahrwagen | 1 | 94316773 |
| 5 | Sitz | 1 | 72591160 |
| 6 | Laufrolle | 4 | 94313784 |
| 7 | Gleitbuchse 3476 | 4 | 70132682 |
| 8 | Bolzen M8x42 mm | 4 | 11300087 |
| 9 | Paßscheibe 12x18x1 DIN988 | 4 | 10500077 |
| 10 | Hülse 16x1.5x12.5 A652 | 4 | 97200579 |
| 11 | Rollsitzunterverkleidung 3588 | 1 | 70132176 |
| 12 | Spreizniet 6x9,5 | 4 | 10418503 |
| 13 | Polsterplatte | 1 | 94316200 |
| 14 | Aufnahme für Polsterplatte | 2 | 70132681 |
| 15 | Filzplatte | 2 | 12510006 |
| 16 | Fußabstützung rechts 3594 | 1 | 70132177 |
| 17 | Fußabstützung links 3595 | 1 | 70132178 |
| 18 | Gurtband mit Schnalle | 2 | 91270014 |
| 19 | Bodenschoner 1696 | 2 | 70127930 |
| 20 | Seilabdeckung | 1 | 94314238 |
| 21 | Standfuß | 1 | 94316772 |
| 22 | Bodenschoner 0738 | 1 | 70132175 |
| 23 | Seilrolle Nr. 4 | 3 | 98585016 |
| 24 | Abschlusskappe 2402 | 1 | 70132157 |
| 25 | Trittplatte | 1 | 94314110 |
| 26 | Bodenrohr | 1 | 91111287-40 |
| 27 | Fuß rechts (mit Rolle und Schoner, kpl. montiert) | 1 | 91170387 |
| 28 | Fuß links (mit Rolle und Schoner, kpl. montiert) | 1 | 91170388 |
| 29 | Gehäuseinheit | 1 | 94316771 |
| 30 | Distanzrohr 13x2.4x33.5 A687 | 1 | 97200589 |
| 31 | Distanzrohr 13x2.4x70.5 A909 | 1 | 97201475 |
| 32 | Seilrolle Nr. 1 | 1 | 98585018 |
| 33 | SKT-Schraube M8x140 | 1 | 10206086 |
| Teil Nr. | Bezeichnung | Stück | Ersatzmittel-Nr. für 07985-800 |
| 34 | Aufnahmablech für Platine | 1 | 97201959 |
| 35 | Aufnahmewinkel Bd 1303 | 1 | 97200243 |
| 36 | Steuerung für Magnetspule | 1 | 42860011 |
| 37 | Befestigungswinkel Gehäuseinheit | 1 | 97003141 |
| 38 | Kontakhalteblech Bd795 | 1 | 97200127 |
| 39 | Geschwindigkeitsabnehmer S-20/ 500 (SPU) | 1 | 67000670 |
| 40 | Schnittstelle 750 mm | 1 | 67000860 |
| 41 | Schwungrad montiert (kpl. mit Seilen) | 1 | 94316206 |
| 42 | Griffrohr | 1 | 91210359-40 |
| 43 | Soft-Grip | 1 | 10118117 |
| 44 | Lamellenstopfen ø 30 mm schwarz | 2 | 10100149 |
| 45 | Spulenkörper | 1 | 91140276 |
| 46 | Erdungskabel | 1 | 67000805 |
| 47 | Schraubterminal (Flachstecker) | 1 | 67000699 |
| 48 | Stromkabel 500 mm | 1 | 67000849 |
| 49 | Computer SD3R | 1 | 94316786 |
| 50 | Leitung mit Buchse, 700 mm | 1 | 42860007 |
| 51 | Lamellenstopfen ø 30 mm blau | 2 | 10100189 |
| 52 | Ablageeinsatz 3625 | 1 | 70132656 |
| 53 | Deckel 4377 | 1 | 70128902 |
| 54 | Auflagleber K-Zeichen | 1 | 33907022 |
| 55 | Verkleidung rechts 4364 | 1 | 70128837 |
| 56 | Verkleidung links 4365 | 1 | 70128838 |
| 57 | Aufnahme Netzstecker 4196 | 1 | 70128803 |
| 58 | Netztrafo | 1 | 42860006 |
| 59 | Pedalachse 13x410 | 1 | 97201560 |
| 60 | Pedalanschlag 13x310 | 1 | 97201561 |
| 61 | Distanzrohr 16x1,2x110 A793 | 2 | 97201455 |
| 62 | Schraubenbeutel | 1 | 94314207 |
| 63 | Distanzrohr 16x1,2x40 A589 | 2 | 97200558 |
| 64 | Cardio-Puls-Set | 1 | 67002000 |
| 65 | Buchse 2763 | 1 | 70132695 |
| 66 | Deckel | 1 | 70126676 |
| 67 | Elektronikaufsatz | 1 | 70132653 |
| 68 | Mitto Plastikschaube 4x35 | 4 | 10224072 |
| 69 | Einschubteil rechts | 1 | 70132654 |
| 70 | Einschubteil links | 1 | 70132655 |
| 71 | Befestigungswinkel | 1 | 97201827 |
Demontage des Computers im Reparaturfall
GB Detaching computer for repairs
F Demontage de I'ordinateur pour réparation
NL Demontage van de computer voor reparatie
E Desmontaje de la computadora en casa de la reparacion
1 Smontaggio del computer nel caso di riparazioni
PL Demontaz komputera w przypadku naprawy
