User manual SAMSUNG Wine cellar : 3 free PDF user manuals

Q: What does error code E3 mean on a Samsung MILLESIME wine cellar and how can it be resolved?

The error code E3 on a Samsung MILLESIME wine cellar generally indicates a problem related to the temperature system or a faulty sensor. Here’s how you can identify and resolve this issue: 1. Checking the temperature Ensure that the set temperature complies with the manufacturer's recommendations. If the temperature is too low or too high, adjust it to be suitable for wine storage. 2. Checking the ventilation Make sure that the wine cellar is well-ventilated and that nothing is blocking the air vents. Poor air circulation can lead to overheating or malfunctioning of the sensors. 3. Restarting the device Unplug the wine cellar for about 5 minutes, then plug it back in to perform a complete restart. This simple action can sometimes reset the sensors and clear the error code. 4. Inspecting the sensors If possible, check that the temperature sensors are clean and properly secured. A damaged or misaligned sensor can generate an E3 error. 5. Technical assistance If after these checks the error code persists, it is advisable to contact Samsung customer service or a qualified professional for a thorough diagnosis and possible repair.

Q: How to unbox a Samsung MILLESIME wine cellar with a power supply located at the back?

To safely unbox your Samsung MILLESIME wine cellar (models RW13EBBB or RW13EBSS), the first step is to properly prepare the space. Completely clear the area in front of and especially behind the appliance, as the power supply at 220-240 V is located at the back and you will need to access it to unplug the cord. Ensure that the back is completely free of any obstacles, cables, piping, or furniture that could hinder movement. Next, turn off the wine cellar, then gently pull it forward only to access the power cord at the back. Do not pull it out completely at first: just move it enough to safely unplug the plug from the wall socket. Be careful not to pull sharply on the cord itself, as this could damage it. Once unplugged, you can then fully extract the appliance. Pull slowly and steadily forward to avoid damaging the back of the appliance where the anti-condensation pipe and the condensers (heating equipment) are located on each side. If the cellar resists, check that nothing is blocking it laterally or underneath. This wine cellar measures 511 mm in width, 578 mm in depth, and 850 mm in height, so ensure that the passage space is sufficient. During the move, ask for help if the cellar is heavy or difficult to handle, to avoid any risk of falling or damaging the product. Once the cellar is out, keep in mind that if you need to reinstall it later, it must be placed on a flat, hard surface, with a minimum space of 5 cm all around and 10 cm above to ensure proper ventilation. The power cord must never be damaged or crushed during this process.