What does error code 41 mean on the Samsung RF65A977FSR freezer and how can it be resolved?

Question

Accepted Answer

Error code 41 on the Samsung RF65A977FSR freezer indicates a problem with the temperature sensor or the communication between this sensor and the electronic control system. This sensor is essential for regulating the temperature of the refrigerator and freezer, which should be maintained at 3 °C and -19 °C respectively, according to the manufacturer's recommendations.

To resolve this issue, start by resetting the appliance: unplug the power cord for about 5 minutes to completely reset the electronic system. This action often clears temporary error codes. Then plug the appliance back in and check if the error reappears.

Next, check the internal connections of the temperature sensor (usually located at the back of the cooling compartment). If you are comfortable with repairs, ensure that the sensor cable is properly connected to the control module. Warning: These components are electrical and potentially dangerous - only intervene if you have experience.

If the error persists after the reset and checking the connections, the sensor itself is likely faulty and needs to be replaced. You can try to locate a compatible replacement sensor or contact a certified Samsung technician who can accurately diagnose the problem and perform the repair. The RF65A977FSR model is covered by a 2-year warranty, so check if your appliance is still under warranty before paying for a repair.

Important note: Do not hesitate to contact the Samsung service center if you are unable to perform these checks yourself. Working on electrical components without qualification may void your warranty.

User manual SAMSUNG Freezer : user manuals and guides in PDF

Models SAMSUNG Freezer most viewed

Other categories SAMSUNG

Recent questions about Freezer SAMSUNG