Q: How do I set the time on the PRESTIGIO Multicam 575w dashcam?

On your Prestigio Multicam 575w dashcam, the date and time cannot be set directly via the buttons on the camera itself. By default, the camera displays a fixed date (01/01/2014) which is replaced by the correct date and time when connected to the MultiCam Prestigio mobile app. To synchronize the time with your camera: Step 1: Download the MultiCam Prestigio app from Google Play Store (Android) or Apple App Store (iOS) Step 2: Turn on your Prestigio Multicam 575w and enable local WiFi by accessing the settings menu on the touchscreen Step 3: On your smartphone, go to Settings > WiFi and connect to the camera's WiFi network (display name: R2-xxxxxxxx) Step 4: Launch the MultiCam Prestigio app and select Local for local connection to your camera Step 5: Go to Setup then Car DVR Settings to validate the configuration. The camera will automatically synchronize with the phone's time Alternative via cloud: You can also enable cloud connection (WiFi - Cloud) in the camera menu. This will allow the camera to automatically synchronize with Prestigio servers and retrieve the correct date and time via the Internet. Correctly synchronized time is essential for your video recordings: it ensures that each video has the correct timestamp, which is crucial for documenting accidents or verifying the chronological order of your trips. After synchronization via the app, the date and time will persist even after closing the app, as long as you do not completely drain the camera's battery.

Question 1

How do I set the time on the PRESTIGIO Multicam 575w dashcam?

Accepted Answer

On your Prestigio Multicam 575w dashcam, the date and time cannot be set directly via the buttons on the camera itself. By default, the camera displays a fixed date (01/01/2014) which is replaced by the correct date and time when connected to the MultiCam Prestigio mobile app.

To synchronize the time with your camera:

Step 1: Download the MultiCam Prestigio app from Google Play Store (Android) or Apple App Store (iOS)
Step 2: Turn on your Prestigio Multicam 575w and enable local WiFi by accessing the settings menu on the touchscreen
Step 3: On your smartphone, go to Settings > WiFi and connect to the camera's WiFi network (display name: R2-xxxxxxxx)
Step 4: Launch the MultiCam Prestigio app and select Local for local connection to your camera
Step 5: Go to Setup then Car DVR Settings to validate the configuration. The camera will automatically synchronize with the phone's time

Alternative via cloud: You can also enable cloud connection (WiFi - Cloud) in the camera menu. This will allow the camera to automatically synchronize with Prestigio servers and retrieve the correct date and time via the Internet.

Correctly synchronized time is essential for your video recordings: it ensures that each video has the correct timestamp, which is crucial for documenting accidents or verifying the chronological order of your trips. After synchronization via the app, the date and time will persist even after closing the app, as long as you do not completely drain the camera's battery.

Question 2

What is the purpose of the GPS socket located on the side of the PRESTIGIO Multicam 575w camera?

Accepted Answer

The socket located on the side of the PRESTIGIO Multicam 575w camera is intended to connect an external GPS module. This feature allows the camera to record location and speed data of the vehicle while driving.

Main functions of the connected GPS module:

Geographical position recording: The camera can save the precise GPS coordinates of each moment of the video recording.
Speed tracking: It measures and records the speed of the vehicle, which can be useful for analyzing driving conditions.
Route consultation: With this data, it is possible to retrace the routes taken during video playback.

This information is particularly useful in the event of an accident or to verify the routes taken. To use this function, a compatible GPS module must be connected to this specific socket on the camera.

Question 3

How to use the PRESTIGIO Multicam 575w dashcam?

Accepted Answer

The PRESTIGIO Multicam 575w is a car dashcam with a preview screen. To get started, press the power button located on the side of the device. After powering on, the camera displays a preview mode for 5 seconds before automatically starting loop recording. To access the settings, press the power button in preview mode and use the navigation buttons [ ]/[ ] to browse the menus. To turn off the device, press and hold the power button for 2 seconds.

Installation and power supply: Mount the camera on the windshield using the provided suction cup, orienting the lens towards the road. Connect the USB cable to your vehicle's cigarette lighter to power the device. The built-in battery provides 60 minutes of recording time. For first use or a full charge, connect the camera to a computer via the included micro-USB cable (charging takes 2 to 3 hours). You can also use a compatible car charger, which will power the camera as soon as it is connected.

Resolution and storage: The PRESTIGIO Multicam 575w records in high resolution (2304 x 1296 pixels at 30 fps) or in Full HD (1920 x 1080 pixels at 30 fps) depending on your choice in the settings. The device has a 160-degree field of view to capture a wide view of the road. Insert a compatible microSD card (up to 32 GB) into the storage port. In loop recording mode, the oldest video files are automatically overwritten when the card reaches its limit, ensuring uninterrupted recording.

Recording modes: The device offers three recording modes: Normal (continuous recording), Loop (cyclic recording with replacement of old files), and Emergency (recording detected events). You can enable motion detection so that the camera automatically records if movement is detected with the engine off. The built-in G-sensor detects collisions or impacts and automatically saves the current video file via emergency recording. During loop recording, press the emergency button to manually save the current video file.

Accessing videos: To transfer your videos to a computer, connect the camera to the PC via the included micro-USB cable. Your computer recognizes the device as a USB storage device, allowing you to copy, move, or play the videos directly. For wireless use, download and install the MultiCam PRESTIGIO mobile app (available on Android and iOS). Enable the camera's Wi-Fi function in the settings and ensure that the Cloud function is disabled. Connect to the camera via the app to control the device, view live videos, and manage files from your smartphone. Note that the camera cannot connect to a smartphone while recording.

Maintenance: Regularly clean the lens with a soft cloth to ensure image quality. Make sure your microSD card has enough free space by deleting or transferring old videos if necessary. Check the audio settings to enable or disable voice recording according to your preferences.

User manual PRESTIGIO Dashcam : user manuals and guides in PDF

Models PRESTIGIO Dashcam most viewed

Other categories PRESTIGIO

Recent questions about Dashcam PRESTIGIO