What does error code E2 mean on the Vedette VFM335BRW refrigerator and how can it be resolved?

Question

Accepted Answer

The error code E2 on the Vedette VFM335BRW refrigerator generally indicates a problem related to the temperature probe or sensor inside the appliance. This probe is essential for measuring the internal temperature and allowing the compressor to operate correctly to maintain freshness.

Possible causes of error code E2:

The temperature probe is covered with frost or improperly positioned.
A failure or short circuit at the probe level.
Loose or damaged electrical connections between the probe and the electronic circuit.
A broken or out-of-service probe requiring replacement.

What to do if the E2 code is displayed?

Check the probe: Ensure it is not covered with frost or ice and is properly positioned inside the refrigerator.
Inspect the connections: Check that the cables and connectors of the probe are securely attached and in good condition.
Test the probe: If possible, measure the resistance of the probe with a multimeter to verify its proper functioning.
Replace the probe: If the probe is defective, it will need to be replaced with a part compatible with your model.
Contact customer service: If you cannot resolve the issue yourself, call Vedette customer service at 09 78 97 97 97 (Monday to Saturday, 8 AM - 8 PM) for professional diagnosis.

For purchasing spare parts or obtaining technical advice, specialized sites like Eurosav can be helpful.

User manual VEDETTE Fridge : user manuals and guides in PDF

Models VEDETTE Fridge most viewed

Other categories VEDETTE

Recent questions about Fridge VEDETTE