Q: What does error code E3 mean on the SABA LVS 14C42MI16 PL IX television and how can it be resolved?

The dishwasher SABA LVS 14C42MI16 PL IX does not have error code E3 in its official documentation. If this code appears on your device, it suggests either a misinterpretation error or a malfunction of the display system. The only documented error codes for this model are E1, E4, and E8. The official error codes for the SABA LVS 14C42MI16 PL IX are: E1 - Prolonged water arrival time: Indicates insufficient water flow. The supply taps are not open, the water inlet is restricted, or the water pressure is too low. Check that the water supply taps are fully open and that the supply hose is not kinked or blocked. E4 - Overflow: The device detects an internal leak. An element of the dishwasher is leaking. Immediately close the main water supply before calling a technical service, then remove the water from the bottom of the device before restarting. E8 - Separation valve failure: The distribution valve is defective. This failure requires qualified technical intervention. If you continue to see E3 or any other unlisted code, it is recommended to contact SABA technical service, as this may indicate a sensor or display issue requiring professional repair.

Question 1

How to cancel a program on the SABA LV15C39-18W dishwasher?

Accepted Answer

To cancel a program on the SABA LV15C39-18W dishwasher, the procedure is very simple. Gently open the appliance door, then press the Program button for more than 3 seconds to cancel the current program. The appliance automatically pauses and goes into standby when the door is opened.

After pressing the Program button for 3 seconds, the current program completely stops and you can then select a new program if you wish, or simply close the door if you prefer to wait.

Important points to remember: A program can only be modified or canceled if it has just started recently. If the detergent has already been released and the washing water has started to drain, you will need to refill the detergent dispenser before starting a new cycle. In this case, refer to the detergent section of the manual for proper dosing.

When you open the door during an active cycle, the appliance emits a beep every minute to alert you. The door must be properly closed for the cycle to restart or for a new program to begin.

Question 2

What does error E6 mean on the SABA LVS13C45GZ17BK dishwasher and how can it be resolved?

Accepted Answer

Error E6 on the SABA LVS13C45GZ17BK dishwasher generally indicates a problem related to the water temperature or a malfunction of the temperature sensor. Here’s how to identify and resolve this issue:

Possible causes of error E6

Water temperature too low or too high
Defective or poorly connected temperature sensor
Water supply issue
Clogged water inlet filter or hose

Steps to resolve error E6

Check the water supply: Ensure that the water tap is fully open and that the water inlet hose is not kinked or blocked.
Clean the filter: Remove and clean the filter located at the bottom of the dishwasher to prevent any blockage that could affect operation.
Check the water temperature: The water entering the dishwasher should ideally be between 50 and 60 °C. An inappropriate temperature can trigger this error.
Restart the appliance: Turn off the dishwasher, wait a few minutes, then turn it back on to see if the error persists.

If after these checks the error E6 continues to appear, it is possible that the temperature sensor is defective or that there is a technical issue requiring the intervention of a professional.

Question 3

What does error code E3 mean on the SABA LVS 14C42MI16 PL IX television and how can it be resolved?

Accepted Answer

The dishwasher SABA LVS 14C42MI16 PL IX does not have error code E3 in its official documentation. If this code appears on your device, it suggests either a misinterpretation error or a malfunction of the display system. The only documented error codes for this model are E1, E4, and E8.

The official error codes for the SABA LVS 14C42MI16 PL IX are:

E1 - Prolonged water arrival time: Indicates insufficient water flow. The supply taps are not open, the water inlet is restricted, or the water pressure is too low. Check that the water supply taps are fully open and that the supply hose is not kinked or blocked.
E4 - Overflow: The device detects an internal leak. An element of the dishwasher is leaking. Immediately close the main water supply before calling a technical service, then remove the water from the bottom of the device before restarting.
E8 - Separation valve failure: The distribution valve is defective. This failure requires qualified technical intervention.

If you continue to see E3 or any other unlisted code, it is recommended to contact SABA technical service, as this may indicate a sensor or display issue requiring professional repair.

Question 4

What does the error code E4 mean on the SABA LVS 14C42MI16 PL IX television and how can it be resolved?

Accepted Answer

The error code E4 on the SABA LVS 14C42MI16 PL IX dishwasher means Overflow. This indicates that the appliance detects an internal water leak. Components of the dishwasher are leaking, causing abnormal water accumulation.

Actions to take immediately:

Shut off the water supply before taking any other action. This is the first essential step to prevent further water damage.
Drain the accumulated water from the bottom of the tub before restarting the appliance. If there is stagnant water due to the overflow or a small leak, it must be removed.
Visually inspect the water connections, circulation hoses, and seals for any apparent leaks or limescale blocking the passages.

If after draining the water and shutting off the supply the error reappears upon restarting, this generally indicates an internal fault in the water distribution system or a structural leak in the appliance. A professional repair technician should intervene to diagnose the exact problem (faulty fill valve, split hose, worn seal, etc.) and carry out the repair.

Important: Do not use the dishwasher until the E4 error issue is resolved, as continuous overflow could cause significant water damage.

User manual SABA Dishwasher : user manuals and guides in PDF

Models SABA Dishwasher most viewed

Other categories SABA

Recent questions about Dishwasher SABA