How to exit demonstration mode (EE) on my TELEFUNKEN TFG193FE1 freezer?

Question

Accepted Answer

The technical manual for the TELEFUNKEN TFG193FE1 does not specifically mention a demonstration mode or an "EE" mode. However, the "EE" display on the screen may be related to:

A sensor issue: The EE error code generally indicates a temperature sensor failure. In this case, check that the sensor is not obstructed by frost or damaged.
A service or test mode: If the appliance is in factory or service mode, press and hold the Mode button for 5 to 10 seconds to reset the appliance.

If the screen persistently displays "EE" and the freezer is not functioning:

Completely turn off the appliance (unplug it from the socket) for 30 seconds, then plug it back in.
Check that the power cord is properly connected and that the socket is working.
Refer to the error codes section of your manual or contact TELEFUNKEN customer service.

User manual TELEFUNKEN Freezer : user manuals and guides in PDF

Models TELEFUNKEN Freezer most viewed

Other categories TELEFUNKEN

Recent questions about Freezer TELEFUNKEN