How to accelerate the Kugoo Kirin B1?

Q: How to accelerate the Kugoo Kirin B1?

To accelerate the Kugoo Kirin B1: you must first fully release the front brake, then press the acceleration button to increase your speed. The scooter reaches a maximum speed of 20 km/h. Acceleration procedure: Fully release the brake handle (before any attempt to accelerate) Gradually press the acceleration button to increase speed Speed increases gradually until reaching the maximum of 20 km/h Factors affecting acceleration performance: the maximum speed depends on several factors: the weight of the rider (do not exceed 120 kg), tire pressure (35-45 psi), road conditions, temperature, battery condition, and maintenance of the motor and brakes. These conditions are measured based on a load of 60 kg, a temperature of 25°C, and a smooth road. Actual performance may vary depending on these conditions. Using cruise control: once you have reached the desired speed, press and release the cruise button. The scooter will automatically maintain this speed. To cancel cruise control, press the button again or use the accelerator or brake. Performance optimization: keep tire pressure between 35-45 psi for optimal traction, regularly check the condition of the brakes and motor, and limit the rider's weight to a maximum of 120 kg for the best performance.

Question

Accepted Answer

To accelerate the Kugoo Kirin B1: you must first fully release the front brake, then press the acceleration button to increase your speed. The scooter reaches a maximum speed of 20 km/h.

Acceleration procedure:

Fully release the brake handle (before any attempt to accelerate)
Gradually press the acceleration button to increase speed
Speed increases gradually until reaching the maximum of 20 km/h

Factors affecting acceleration performance: the maximum speed depends on several factors: the weight of the rider (do not exceed 120 kg), tire pressure (35-45 psi), road conditions, temperature, battery condition, and maintenance of the motor and brakes. These conditions are measured based on a load of 60 kg, a temperature of 25°C, and a smooth road. Actual performance may vary depending on these conditions.

Using cruise control: once you have reached the desired speed, press and release the cruise button. The scooter will automatically maintain this speed. To cancel cruise control, press the button again or use the accelerator or brake.

Performance optimization: keep tire pressure between 35-45 psi for optimal traction, regularly check the condition of the brakes and motor, and limit the rider's weight to a maximum of 120 kg for the best performance.

User manual Kugoo Scooter : user manuals and guides in PDF

Models Kugoo Scooter most viewed

Other categories Kugoo

Recent questions about Scooter Kugoo