Q: How to accelerate the Kugoo Kirin B1?

To accelerate the Kugoo Kirin B1: you must first fully release the front brake, then press the acceleration button to increase your speed. The scooter reaches a maximum speed of 20 km/h. Acceleration procedure: Fully release the brake handle (before any attempt to accelerate) Gradually press the acceleration button to increase speed Speed increases gradually until reaching the maximum of 20 km/h Factors affecting acceleration performance: the maximum speed depends on several factors: the weight of the rider (do not exceed 120 kg), tire pressure (35-45 psi), road conditions, temperature, battery condition, and maintenance of the motor and brakes. These conditions are measured based on a load of 60 kg, a temperature of 25°C, and a smooth road. Actual performance may vary depending on these conditions. Using cruise control: once you have reached the desired speed, press and release the cruise button. The scooter will automatically maintain this speed. To cancel cruise control, press the button again or use the accelerator or brake. Performance optimization: keep tire pressure between 35-45 psi for optimal traction, regularly check the condition of the brakes and motor, and limit the rider's weight to a maximum of 120 kg for the best performance.

Question 1

What is the recommended tire pressure for the KuKirin G2 Ultra?

Accepted Answer

The manual for the KuKirin G2 Ultra states that this model is equipped with 10-inch tubeless tires. It recommends regularly checking the pressure and maintaining it at an appropriate level.

However, the provided manual does not specify the exact recommended pressure values in PSI or BAR. To obtain the correct pressure, we recommend that you:

Check the markings on the sidewall of the tires, which usually indicate the maximum recommended pressure
Contact Kugoo customer service directly for the exact specifications
Regularly check the pressure with a gauge and adjust according to your weight and usage conditions

Question 2

How to accelerate the Kugoo Kirin B1?

Accepted Answer

To accelerate the Kugoo Kirin B1: you must first fully release the front brake, then press the acceleration button to increase your speed. The scooter reaches a maximum speed of 20 km/h.

Acceleration procedure:

Fully release the brake handle (before any attempt to accelerate)
Gradually press the acceleration button to increase speed
Speed increases gradually until reaching the maximum of 20 km/h

Factors affecting acceleration performance: the maximum speed depends on several factors: the weight of the rider (do not exceed 120 kg), tire pressure (35-45 psi), road conditions, temperature, battery condition, and maintenance of the motor and brakes. These conditions are measured based on a load of 60 kg, a temperature of 25°C, and a smooth road. Actual performance may vary depending on these conditions.

Using cruise control: once you have reached the desired speed, press and release the cruise button. The scooter will automatically maintain this speed. To cancel cruise control, press the button again or use the accelerator or brake.

Performance optimization: keep tire pressure between 35-45 psi for optimal traction, regularly check the condition of the brakes and motor, and limit the rider's weight to a maximum of 120 kg for the best performance.

User manual Kugoo : user manuals and guides in PDF

Models Kugoo most viewed

Browse manuals Kugoo by appliance type

Recent questions about devices Kugoo