How to connect the CASIO AP-38 digital piano to a PC?

Question

Accepted Answer

To connect your CASIO AP-38 digital piano to a PC, follow these steps:

1. Check your piano's ports

The CASIO AP-38 is equipped with a USB port that allows direct connection to a PC without the need for an additional MIDI interface.

2. Use an appropriate USB cable

Use a standard USB cable (USB A to USB B type) to connect the piano to your computer.

3. Plug in the cable

Connect the USB B end of the cable to the USB port of the piano.
Plug the other USB A end into an available USB port on your PC.

4. Install drivers

Depending on your operating system (Windows or macOS), the piano may be recognized automatically. If not, you can download the necessary drivers from the official CASIO website to ensure compatibility.

5. Configure your music software

Open your music or audio production software (such as GarageBand, FL Studio, Ableton Live, etc.) and select the CASIO AP-38 as the MIDI input device to use the piano as a controller or virtual instrument.

6. Test the connection

Play a few notes on the piano and check that the software is receiving the MIDI signals. If the sound does not come directly from the piano via the PC, make sure that the software is properly configured to output sound through the computer's speakers or headphones.

This connection allows you to record your performances, use virtual instruments, or control music software with your CASIO AP-38.

User manual CASIO Digital piano : user manuals and guides in PDF

Models CASIO Digital piano most viewed

Other categories CASIO

Recent questions about Digital piano CASIO