User manual CASIO Point of Sale Terminal : 1 free PDF user manuals

Q: Why doesn't the CASIO QT-6000 recognize my printer?

The PDF of this manual does not detail the specific printer configuration settings for COM or I/O. Here’s what you can check in order: Basic diagnostic steps Check that the printer is on and online (active 'online' light) Is the cable properly plugged in on both ends? Is there paper and no jam in the printer? Restart the terminal and the printer (turn off, then turn on the printer first) Connection type The QT-6000 supports USB, Ethernet, and serial connectivity . Ensure that your remote printer (type SP-1300) is connected to the correct type of port and that it is compatible with it. Configuration in the terminal If the printer is physically correct but still not recognized, the I/O settings must be configured in programming mode (PGM) of the terminal. This type of adjustment requires access to service mode. For complete programming steps and advanced diagnostics, refer to the dedicated programming manual for the QT-6000 or contact CASIO support.

Q: How to add a custom button on the CASIO QT-6000 point of sale terminal?

To add a custom button on your CASIO QT-6000 point of sale terminal, follow the steps below: 1. Access the programming mode Turn on your terminal and enter programming mode. This is usually done by pressing the Mode button or a specific combination of keys. This mode allows you to configure the terminal settings. 2. Navigate to key configuration In the programming menu, look for the option related to button customization or key configuration. It may be named Key Configuration or Button Customization . 3. Add and configure the button Select the option to add a new button. Choose the function you want to assign to this button, such as a specific sale, a service, or a quick function. Enter the required details, such as the button name or the associated product code. 4. Save the changes After configuring the button, make sure to save your changes. This can be done by exiting programming mode or selecting a Save or Validate option. 5. Test the new button Exit programming mode and test the added button to ensure it works correctly and performs the desired action. If you encounter difficulties at a specific step, feel free to ask for further clarification.