Q: Why does the dryer operate intermittently?

Yes, this is completely normal. The CANDY GCV 570NC-S is equipped with Sensor Dry technology that is designed to operate the dryer intermittently. Here’s why: Drying phase : The moisture sensor continuously monitors the humidity and temperature inside the drum to optimize the cycle duration based on your items. Cooling phase : During the last 10 to 15 minutes, cold air circulates. This phase is also intermittent to gradually cool down. Anti-crease phase : After the program ends, the drum continues to turn intermittently to minimize creases in the clothes. This intermittent operation does not indicate a malfunction. It is an energy efficiency mechanism and a protection for your garments specific to this model.

Q: How to use the delayed start function of 3h, 6h, or 9h?

The CANDY GCV 570NC-S has a delayed start function that allows you to program the dryer to start its cycle automatically after a waiting period. Three options are available: 3 hours 6 hours 9 hours This function is useful if you want the drying to finish at a specific time (for example, in the evening after you return from work) or to optimize your electricity consumption according to your rates (off-peak hours). Simply select your usual drying program, activate the delayed start by choosing the desired delay, and then start the machine. The machine will wait for the defined time before starting the cycle.

Q: How do I turn off the dryer once the cycle is finished?

When the drying cycle is finished: the END indicator lights up on your CANDY GCV 570 NC. The machine does not need to be turned off manually - it automatically enters cooling mode (10-15 minutes) . During this time, the drum will continue to rotate intermittently to minimize wrinkling of the laundry. To interrupt the cycle before it ends: Press the Start/Pause button for 3 seconds The machine will stop and you can open the door to remove the laundry Note: Your dryer does not have a separate

Q: How to use the Candy GCV 570 NC dryer to dry at low temperature?

Your Candy GCV 570 NC dryer has a low temperature function to gently dry sensitive fabrics without overheating. How to activate low temperature: Select the desired program using the program selector Press the low temperature button (located on the control panel) A light will turn on above the button to confirm activation Press the Start button Ideal programs for a not very hot temperature: De-wrinkle Program : uses only cold air for 20 minutes - ideal for minimal temperature Wool Program : gentle cycle of 12 minutes at low temperature, suitable for delicate fabrics Any program + low temperature activated : reduces drying heat Helpful tip: Regardless of the chosen program, the last 15 minutes of each cycle are always done in cold air, which helps minimize wrinkles and allows clothes to cool gently.

Q: Where is the lint filter located in the Candy GCV 570 NC dryer?

The lint filter is located inside the door opening of the dryer, in the inner frame. How to access the filter: Pull the filter upwards to remove it Open the filter according to the instructions in the manual Gently remove lint using a soft brush or your fingertips Reinsert the filter and push it back into place Important points: Clean the filter before each drying cycle to ensure your appliance's efficiency Do not clean the filter with water A maintenance indicator lights up when the filter needs to be cleaned

Q: What programs available on this dryer last between one hour and one hour and a half?

This dryer CANDY Smart Pro CSO4H7A1DES has 8 drying programs with varying durations depending on the selected cycle. Although the documentation of this manual does not display the complete detailed table of durations for each program, the model offers quick cycles that fit within your time frame of one to one and a half hours. To know the exact duration before starting a cycle: Via the hOn app: connect the dryer via Wi-Fi (turn the selector to REMOTE CONTROL position), then check the hOn mobile app which displays the estimated duration of the program in real-time before it starts. On the device: select the desired program with the selector button - the duration is displayed before starting the cycle. The available drying levels (iron dry, hanging dry, wardrobe, or extra dry) also affect the total duration: choosing a less intensive level generally reduces the cycle time.

Question 1

Why does the dryer operate intermittently?

Accepted Answer

Yes, this is completely normal. The CANDY GCV 570NC-S is equipped with Sensor Dry technology that is designed to operate the dryer intermittently.

Here’s why:

Drying phase: The moisture sensor continuously monitors the humidity and temperature inside the drum to optimize the cycle duration based on your items.
Cooling phase: During the last 10 to 15 minutes, cold air circulates. This phase is also intermittent to gradually cool down.
Anti-crease phase: After the program ends, the drum continues to turn intermittently to minimize creases in the clothes.

This intermittent operation does not indicate a malfunction. It is an energy efficiency mechanism and a protection for your garments specific to this model.

Question 2

How to use the delayed start function of 3h, 6h, or 9h?

Accepted Answer

The CANDY GCV 570NC-S has a delayed start function that allows you to program the dryer to start its cycle automatically after a waiting period. Three options are available:

3 hours
6 hours
9 hours

This function is useful if you want the drying to finish at a specific time (for example, in the evening after you return from work) or to optimize your electricity consumption according to your rates (off-peak hours). Simply select your usual drying program, activate the delayed start by choosing the desired delay, and then start the machine. The machine will wait for the defined time before starting the cycle.

Question 3

How to program a drying with moderate air?

Accepted Answer

On the CANDY GCV 570NC-S, there is no "drying with moderate air" strictly speaking. However, you can program a gentle drying by using the Delicate Drying (low temperature) function combined with the program of your choice.

Here’s how to proceed:

Step 1: Load your laundry and close the door.
Step 2: Turn the selector to choose a program. For moderate drying, opt for "Ready to Iron" or "Dry", rather than "Extra Dry". These levels offer gentler drying than a "Completely Dry" selection.
Step 3: Immediately press the Delicate Drying button (located below the selection dial). The indicator light above the button will turn on, confirming that the low temperature is activated.
Step 4: Press the Start/Pause button. The drying begins with a reduced temperature.

Important: You only have the first 3 minutes of the cycle to activate Delicate Drying. After this time, you must cancel and reset the program to change this setting.

You can also use the timed programs (30', 45', 60' minutes) with Delicate Drying to better control the intensity of the drying. Note that during the last 15 minutes, the load is always dried in cold air, which improves the protection of the laundry. The Anti Crease program is also a good option: it heats for 9 minutes, then cools for 3 minutes, preserving your clothes.

Question 4

How to select and start a drying program?

Accepted Answer

To program your CANDY GCV 570NC-S tumble dryer, follow these simple steps:

Load your laundry: Place the wet laundry in the drum. Respect the maximum capacities (7 kg for cotton, 3.5 kg for synthetic textiles).
Select a program: Turn the program selector to choose the desired drying cycle. This tumble dryer has several options: standard drying with automatic moisture detection (Sensor Dry), delicate drying for fragile textiles, and other specialized cycles.
Additional options (optional): If you want a delayed start, press the delayed start button to choose a delay of 3h, 6h, or 9h before the cycle begins.
Start the program: Press the Start/Pause button. The tumble dryer starts immediately or at the scheduled time according to your choice.
End of cycle: At the end of drying, the tumble dryer goes into cooling mode (10-15 minutes) with intermittent tumbling to prevent creasing.

Important: Before each use, ensure that the lint filter is properly in place and clean. Also, empty the condensed water tank after each cycle.

Question 5

How do I turn off the dryer once the cycle is finished?

Accepted Answer

When the drying cycle is finished: the END indicator lights up on your CANDY GCV 570 NC. The machine does not need to be turned off manually - it automatically enters cooling mode (10-15 minutes).

During this time, the drum will continue to rotate intermittently to minimize wrinkling of the laundry.

To interrupt the cycle before it ends:

Press the Start/Pause button for 3 seconds
The machine will stop and you can open the door to remove the laundry

Note: Your dryer does not have a separate

Question 6

How to use the Candy GCV 570 NC dryer to dry at low temperature?

Accepted Answer

Your Candy GCV 570 NC dryer has a low temperature function to gently dry sensitive fabrics without overheating.

How to activate low temperature:

Select the desired program using the program selector
Press the low temperature button (located on the control panel)
A light will turn on above the button to confirm activation
Press the Start button

Ideal programs for a not very hot temperature:

De-wrinkle Program: uses only cold air for 20 minutes - ideal for minimal temperature
Wool Program: gentle cycle of 12 minutes at low temperature, suitable for delicate fabrics
Any program + low temperature activated: reduces drying heat

Helpful tip: Regardless of the chosen program, the last 15 minutes of each cycle are always done in cold air, which helps minimize wrinkles and allows clothes to cool gently.

Question 7

Where is the lint filter located in the Candy GCV 570 NC dryer?

Accepted Answer

The lint filter is located inside the door opening of the dryer, in the inner frame.

How to access the filter:

Pull the filter upwards to remove it
Open the filter according to the instructions in the manual
Gently remove lint using a soft brush or your fingertips
Reinsert the filter and push it back into place

Important points:

Clean the filter before each drying cycle to ensure your appliance's efficiency
Do not clean the filter with water
A maintenance indicator lights up when the filter needs to be cleaned

Question 8

How to use the CANDY GCC 581 NB-S dryer?

Accepted Answer

Your CANDY GCC 581 NB-S dryer is a condensation appliance with an automatic humidity sensor. To use it correctly, load a maximum of 8 kg of spun wet laundry, then select your program using the rotary selector.

Starting: Open the door, load your laundry, close the door until you hear a click, then turn the selector to choose your program. For delicate items (synthetics, acrylic), press the Delicate Drying button to reduce the temperature, the indicator light will turn on. Then press the Start/Pause button to start. The DRY indicator will light up continuously and blink when the cycle is ending.

Available programs: The Perfect Home program automatically adjusts the drying in three levels (Extra Dry for towels and bathrobes, Dry for storage without ironing, Ready to Iron). The 40' Rapid performs a complete cycle in 40 minutes for light loads up to 2 kg, continuously monitoring humidity. The Wool is a specialized 12-minute hot air cycle to soften or refresh woolen items. The Anti Crease program heats the load for 9 minutes and then cools it for 3 minutes to relax wrinkles and facilitate ironing. You also have timed cycles: 30, 45, 60, 75, 90, 120, or 150 minutes. The De-wrinkle is a 20-minute cold air cycle to refresh laundry without heat.

Practical functions: The Delayed Start allows you to postpone the start by 3, 6, or 9 hours. Press the button to select the delay (the indicator blinks), then start the program. If you open the door during the cycle, close it and press Start/Pause again to resume. At the end of the cycle, the machine automatically enters a cooling phase of 10 to 15 minutes before stopping, and the END indicator lights up. The drum will continue to turn intermittently to minimize wrinkles until it stops or the door is opened. To cancel a program, press and hold Start/Pause for 3 seconds.

Maintenance after each use: Empty the water tank that fills up gradually (the indicator lights up if full). Remove it by unlocking the protective plate, sliding out the tank, and pouring the water out through the top cover. Clean the lint filter by pulling it up, opening it, and gently removing lint with your fingers or a soft brush. Important: never clean it with water. Leave the door open to allow the inside of the drum to dry by air circulation. Wipe the inner surface and the door seal with a damp cloth to prevent the door from sticking.

Practical tips: To save energy, always dry a full load (8 kg for cotton, 4 kg maximum for synthetics), clean the filter before each cycle, and load the laundry as little soaked as possible. If clothes are not drying enough, check that the filter is not clogged, empty the water tank, and regularly clean the condenser by accessing it through the protective plate (running water between the plates). During the last 15 minutes of any cycle, the laundry dries with cold air. Caution: the drum and door can be very hot during operation.

Question 9

What programs available on this dryer last between one hour and one hour and a half?

Accepted Answer

This dryer CANDY Smart Pro CSO4H7A1DES has 8 drying programs with varying durations depending on the selected cycle.

Although the documentation of this manual does not display the complete detailed table of durations for each program, the model offers quick cycles that fit within your time frame of one to one and a half hours.

To know the exact duration before starting a cycle:

Via the hOn app: connect the dryer via Wi-Fi (turn the selector to REMOTE CONTROL position), then check the hOn mobile app which displays the estimated duration of the program in real-time before it starts.
On the device: select the desired program with the selector button - the duration is displayed before starting the cycle.

The available drying levels (iron dry, hanging dry, wardrobe, or extra dry) also affect the total duration: choosing a less intensive level generally reduces the cycle time.

Question 10

What is the contact for the GIAS support service for the CANDY GO DC 78GT137S dryer?

Accepted Answer

To obtain assistance or repair for your CANDY GO DC 78GT137S dryer, you can contact the GIAS support service. Here are the contact details:

GIAS support service: this is the local engineer responsible for the maintenance and repairs of your appliance.

You can check this official page with the GIAS support contacts which includes an image detailing the contact information.

In general, it is recommended to contact this service directly for an accurate diagnosis and a quick intervention on your dryer.

User manual CANDY Tumble drier : user manuals and guides in PDF

Models CANDY Tumble drier most viewed

Other categories CANDY

Recent questions about Tumble drier CANDY