How to flip the image on the INFOCUS X16 projector for rear projection?

Question

Accepted Answer

To flip the image on your INFOCUS X16 projector in rear projection mode, you need to access the projector's position settings. This function allows you to configure the image orientation based on your setup (front, rear, or ceiling projection).

Access the setup menu:

Press the Menu button on the remote control or the projector's control panel
Navigate to SYSTEM SETUP: Basic using the directional arrows
Select the Projector Position option

Choose the appropriate orientation:

Front: For standard forward projection onto a screen
Rear: For simple rear projection, with the projector placed behind a transparent screen and the image flipped horizontally
Front Ceiling: For a ceiling installation facing forward, image flipped vertically
Rear Ceiling: For ceiling rear projection, image flipped both horizontally and vertically

Confirm your settings:

Once you have selected the appropriate position mode, confirm your choice
Exit the menu by pressing Exit or navigating to the Exit option
The settings are automatically saved by the projector

The Rear mode is the one to use for classic rear projection behind a transparent screen. This function flips the image horizontally so that it displays correctly when projected through the transparent material. You do not need to modify the video source or media files; the projector handles the inversion automatically.

User manual INFOCUS Projector : user manuals and guides in PDF

Models INFOCUS Projector most viewed

Other categories INFOCUS

Recent questions about Projector INFOCUS