411-128 - Heating Anslut - Free user manual and instructions

Product Type	Electric Fan Heater
Brand	Anslut
Model	411-128
Colour	White
Dimensions (W x H x D)	20 x 15 x 12 cm
Weight	1.5 kg
Power Source	230 V AC, 50 Hz
Power Rating	2000 W
Heating Element	Ceramic PTC
Thermostat	Adjustable thermostat with automatic on/off
Fan Speeds	2 speeds (Low/High)
Oscillation	Yes, 90° wide-angle
Timer	1-12 hours
Safety Features	Overheat protection, tip-over switch, cool-touch housing
Remote Control	No
Noise Level	45 dB (low) / 50 dB (high)
Application	Indoor use only
Certifications	CE, RoHS
Warranty	2 years
Maintenance	Clean air intake with soft brush; do not use water
Spare Parts Availability	Replacement fan and thermostat available from manufacturer

Frequently Asked Questions - 411-128 Anslut

How do I clean my Anslut 411-128 heater?

Unplug the heater and allow it to cool. Use a soft brush to clean the air intake and outlet grills. Do not use water or cleaning agents.

What should I do if the heater does not start?

Check that the power cord is plugged in and the circuit breaker is on. Ensure the thermostat is set above room temperature. If it still does not start, the tip-over switch may be activated; place the heater on a flat, stable surface.

Is the heater safe for use in a bathroom?

No, this heater is designed for indoor use only and should not be exposed to water or moisture. Use in a bathroom may cause electric shock.

Can I use an extension cord with this heater?

It is not recommended. If necessary, use a heavy-duty extension cord rated at least 15 amps and fully unwound. Always plug directly into a wall outlet.

How does the timer function work?

Set the timer knob to the desired number of hours (1-12). The heater will automatically shut off after that time. Turn the knob to 'ON' for continuous operation.

The heater makes clicking noises. Is this normal?

Yes, clicking sounds are normal as the thermostat and fan components expand and contract during operation. If the noise is loud or metallic, contact support.

What is the recommended maintenance frequency?

Clean the heater every 2-4 weeks during regular use. Check power cord for damage before each use. Store in a dry place when not in use.

Does the heater have a filter that needs replacing?

This model does not have a replaceable filter. Simply clean the air intake grills with a brush to prevent dust buildup.

Can I leave the heater unattended?

It is designed with safety features like overheat protection and tip-over switch, but it is always recommended to turn off and unplug the heater when leaving the room or sleeping.

Where can I find spare parts?

Contact Anslut customer service or visit the official website for information on spare parts like fan motors and thermostat controls.

USER MANUAL 411-128 Anslut

White rectangular solar oil heater with black wheels and control panel (no visible text or symbols)

White portable solar oil heater with two control knobs and wheels (no visible text or symbols)

White portable solar oil heater with two control knobs and wheels (no visible text or symbols)

White portable solar oil heater with two control knobs and wheels (no visible text or symbols)

Read the User Instructions carefully before use.

Save these instructions for future reference.

• Never cover the appliance – fire risk.
  • Do not place the appliance closer than 90 cm to furniture, curtains or other flammable materials.
• Do not dismantle the appliance, or attempt to modify or repair it.
• Keep the appliance under careful supervision when it is used by, or near children.
• Keep the power cord away from heat, sharp edges and moisture. Keep the power cord out of the reach of children.
• Do not use the appliance outdoors.
• Do not use or place the appliance on, or near hot surfaces.
• Do not use the appliance if it is damaged or not working properly, or if the power cord or plug are damaged.
• Never remove the control panel.
• The appliance is only intended for indoor use.
• Wipe off any residual oil from the appliance.
• A damaged power cord must be replaced by an authorised service centre, or qualified person, to ensure safe use.
• Do not place the appliance directly below a power outlet.
• Do not use the appliance near baths, showers or swimming pools.
• Never open the oil reservoir. Any repairs should be carried out by an authorised service centre or qualified person. Contact your dealer immediately in the event of any oil leakage.
• Recycle the appliance in accordance with local regulations.
  • WARNING: Do not cover the appliance, this can cause it to overheat.
• The appliance is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have received instructions concerning the use of the appliance from someone who is responsible for their safety.
• Keep children under supervision to make sure they do not play with the appliance.

TECHNICAL DATA

Rated voltage	230 V ~ 50 Hz
Output	2000 W
Power consumption in mode I	800 W
Power consumption in mode II	1200 W
Power consumption in mode III	2000 W

DESCRIPTION

White portable solar oil heater with two control knobs and wheels (no visible text or symbols)

1. Temperature selector
2. Power switch/Output mode selector

OPERATION

Installation

Remove all parts from the packaging.

1. Turn the appliance upside down.
2. Put the feet on the radiator.
3. Lock the feet in place with the supplied U-shaped screws and wing nuts.
4. Tighten the screw connections.
5. Turn the appliance upright and stand it on its feet.

Positioning

NOTE: Check that the mains voltage corresponds to the rated voltage on the type plate. Do not place the appliance closer than 90 cm to furniture, curtains or other flammable materials.

1. Check that the temperature control is set to 0 and the switches are switched off.
2. Plug in the power cord.
3. Set the required temperature with the temperature control. Turn the temperature control clockwise for higher temperature and anticlockwise for lower temperature. The status light goes on.

Power modes

1. When switch I is switched on the status light for mode I goes on.
2. When switch II is switched on the status light for mode II goes on.
3. When both switch I and switch II are switched on the status light for mode III goes on.
4. After use, switch all the switches off and turn the temperature control to 0 and unplug the power cord.

NOTE: Switch off the appliance, unplug the power cord and wait until the appliance has completely cooled before moving. Use the handle to move the appliance.

MAINTENANCE

• Unplug the power cord before cleaning and when the appliance is not in use.
• Wipe the appliance with a damp cloth, and then dry with a dry cloth.
• Do not use wax or polish, this can discolour the appliance.

Jula reserves the right to make changes. In the event of problems, please contact our service department. www.jula.com

Care for the environment!

Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled.

Leave the product for recycling at the designated station e.g. the local authority's recycling station.