ACX300-R - Network switch Black Box - Free user manual and instructions
Find the device manual for free ACX300-R Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Black Box |
| Model | ACX300-R |
| Number of Ports | 8 |
| Port Type | 10/100/1000 Mbps Ethernet |
| Switching Capacity | 16 Gbps |
| MAC Address Table Size | 8K entries |
| PoE Support | No |
| Form Factor | Desktop |
| Dimensions (W x D x H) | 17.3 x 7.6 x 4.4 cm (6.8 x 3.0 x 1.7 in) |
| Weight | 0.5 kg (1.1 lbs) |
| Power Supply | External AC adapter, 100-240V, 50/60Hz |
| Power Consumption | 5W max |
| LED Indicators | Power, Link/Activity per port |
| Cooling | Fanless |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
| Mounting | Desktop or wall-mountable (bracket included) |
| Management | Unmanaged |
| Compliance | FCC, CE, RoHS |
| Ethernet Standards | IEEE 802.3, 802.3u, 802.3ab |
| Jumbo Frame Support | Up to 9K bytes |
| Warranty | 1 year |
Frequently Asked Questions - ACX300-R Black Box
How do I reset the Black Box ACX300-R to factory defaults?
To reset, press and hold the reset button (located on the front panel) for about 10 seconds using a paperclip. Release when the LEDs flash. The switch will reboot with factory settings.
Does the ACX300-R support PoE (Power over Ethernet)?
No, the ACX300-R is a non-PoE switch. It requires a separate power adapter for each powered device or a PoE injector.
What is the maximum cable length supported?
The switch supports standard Ethernet cables up to 100 meters (328 feet) for all ports.
How can I mount the switch on a wall?
Use the included wall-mount brackets. Secure the brackets to the switch with the provided screws, then attach to a wall using appropriate anchors (not included).
What do the LED indicators mean?
The Power LED lights up when connected to power. Each port has a green LED: solid for link, flashing for activity.
Is the switch plug-and-play?
Yes, the ACX300-R is an unmanaged switch. Simply connect the power and Ethernet cables; no configuration required.
Can I use this switch with a router?
Yes, connect one of the ports to your router using an Ethernet cable to extend your network.
What is the power consumption of the switch?
The typical power consumption is 5 watts maximum. Use the provided 5V DC adapter.
How do I clean the switch?
Disconnect power and wipe the exterior with a dry, soft cloth. Do not use liquids or cleaners.
Does the switch support VLANs?
No, the ACX300-R is an unmanaged switch and does not support VLAN configuration.
User questions about ACX300-R Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual ACX300-R - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACX300-R by Black Box.