HSB-M01 - Access Control Dormakaba - Free user manual and instructions
Find the device manual for free HSB-M01 Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sensor barrier / speed gate for pedestrian passage control |
| Model | HSB-M01 |
| Dimensions (Interlock Height) | 40-3/16" (1020 mm) |
| Dimensions (Interlock Length) | 69-5/16" (1760 mm) |
| Passage Width | 35-7/16" (900 mm); ADA compliant 36" (915 mm) available |
| Total Width | 51-3/16" (1300 mm) |
| Housing Material | AISI 304 stainless steel, satin finish |
| Barrier Elements | Two curved door leaves made of AISI 304 stainless steel tubes, ∅1-1/16" (26.9 mm) with ∅3/8" (10 mm) vertical struts |
| Drive Type | Low energy, servo-positioning, power-assisted motion (Type 2) |
| Energy Content | Less than 1.18 lb/ft |
| Power Supply | 110–230 VAC, 50/60 Hz, 368 VA |
| Standby Power Consumption | 17 VA |
| Protection Class (Housing) | IP54 |
| Operating Modes | Normally closed, normally open; barriers close on tailgate event |
| Security Features | Light grid monitoring swinging area; basic sensor system for single passage monitoring in both directions |
| Power Failure Behavior | Door leaves move freely (fail-safe open) |
| Installation | Dowelled on finished floor level (FFL); suitable for outdoor installation |
| Compliance | ADA compliant width option available |
Frequently Asked Questions - HSB-M01 Dormakaba
What are the main dimensions of the Dormakaba HSB-M01?
The interlock height is 40-3/16" (1020 mm), interlock length 69-5/16" (1760 mm), passage width 35-7/16" (900 mm), and total width 51-3/16" (1300 mm). An ADA-compliant 36" (915 mm) passage width is also available.
What material is the housing made of?
The housing and barrier elements are made of AISI 304 stainless steel with a satin finish, ensuring durability and a premium appearance.
What type of drive does the HSB-M01 use?
It uses a low energy servo-positioning drive with power-assisted motion (Type 2). The energy content is less than 1.18 lb/ft, making it safe for pedestrian use.
What is the power requirement for this barrier?
It requires a power supply of 110–230 VAC, 50/60 Hz, with a maximum power of 368 VA. Standby consumption is only 17 VA.
What happens during a power failure?
The door leaves move freely, allowing unimpeded passage and ensuring fail-safe operation.
Is the HSB-M01 suitable for outdoor installation?
Yes, it is suitable for outdoor installation and has an IP54 protection class for the housing and components.
How does the tailgating detection work?
The barrier uses a light grid to monitor the swinging area and a basic sensor system that detects unauthorized passage. When a tailgate event is detected, the barriers close.
What operating modes are available?
The HSB-M01 supports normally closed and normally open modes. In both modes, barriers close automatically on a tailgate event.
How is the barrier installed?
It is dowelled directly onto the finished floor level (FFL). Installation should be performed by qualified personnel following the provided manual.
What maintenance does the HSB-M01 require?
Regular cleaning of the stainless steel surfaces with a soft cloth and mild detergent is recommended. Periodically check the light grid and drive mechanisms for proper operation. Refer to the manual for detailed maintenance intervals.
User questions about HSB-M01 Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control in PDF format for free! Find your manual HSB-M01 - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSB-M01 by Dormakaba.
USER MANUAL HSB-M01 Dormakaba
HSB-M01 sensor barriers
Moderate
natural_image
3D rendering of two metallic structural transistors with vertical supports and a horizontal bar (no text or symbols)Moderate units offer tailgating monitoring.
Standard units HSB-M01
| Note: Description of single unit | |
| Interlock height 40-3/16" (1020) | |
| Interlock length 69-5/16" (1760) | |
| Passage width | 35-7/16" (900) |
| Total width | 51-3/16" (1300) |
| Housing, base columns, guiding elements | AISI 304 stainless steel with satin finish. |
| ADA compliance 36" (915) width available. | |
| Barrier elements | Two door leaves made of curved AISI 304, ∅1-1/16" (26.9) stainless steel tubes with ∅ 3/8" (10) vertical struts, upper edge 35-7/16" (900). |
| Swinging area monitored by a light grid. | |
| Security Passage area monitored by basic sensor system with a compact installation length (basic level of single passage monitoring in both directions) | |
| Finish Stainless steel semi-gloss smooth finish. | |
| Safety Low energy drive with energy content less than 1.18 lb/ft. | |
| Function Type 2-power assisted motion; two servo-positioning drives/electrically controlled in both directions. | |
| Drives Integrated in the swing tube. | |
| Operating modes Optical. | Normally closed.Normally opened. (Barriers close on tailgate event.) |
| Electrical equipment Control system and power supply integrated in the unit. | |
| Power supply 110 - 230 VAC, 50/60 Hz, 368 VA | |
| Standby power consumption | 17 VA |
| Standard adjustment in case of power failure | Door leaves move freely. |
| Installation Dowelled on finished floor level FFL. | |
| Suitable for outdoor installation. | |
| Protection classes | Housing IP54, components conducting supply voltage IP54. |
HSB-M01
HSB-M01
Installation drawings
Note
Dimensions shown as inches followed by millimeters; for example, 1" (25).
Table of contents
Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dormakaba
Model : HSB-M01
Category : Access Control