Crane 2000-M - Access Control Dormakaba - Free user manual and instructions
Find the device manual for free Crane 2000-M Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Brand | Dormakaba |
| Model | Crane 2000-M |
| Dimensions (H x W x D) | 120 mm x 80 mm x 30 mm |
| Weight | 200 g |
| Power Supply | 12V DC, 500 mA |
| Operating Temperature | -20°C to 60°C |
| Authentication Methods | Keypad, RFID card, fingerprint |
| User Capacity | Up to 2,000 users |
| Event Log | Up to 100,000 events |
| Connectivity | RS-485, Wiegand, Ethernet |
| Mounting Type | Wall-mounted (indoor/outdoor) |
| IP Rating | IP65 (weatherproof) |
| Material | Zinc alloy, polycarbonate |
| Maintenance | Clean with a soft, dry cloth; avoid solvents |
| Security Features | Anti-tamper sensor, encrypted communication |
| Spare Parts Availability | Replacement readers, cables, and mounting kits |
| Compliance | CE, FCC, RoHS |
| Warranty | 2 years |
Frequently Asked Questions - Crane 2000-M Dormakaba
How do I reset the Crane 2000-M to factory defaults?
Press and hold the reset button (located inside the unit) for 10 seconds using a paperclip. The device will reboot with default settings.
What types of cards are compatible with the Crane 2000-M?
It supports 125 kHz (EM4100) and 13.56 MHz (MIFARE) RFID cards, as well as key fobs.
Can I mount the Crane 2000-M outdoors?
Yes, the device has an IP65 rating, making it suitable for outdoor use. Ensure proper sealing of cable entries.
How many users can be stored in the Crane 2000-M?
The maximum user capacity is 2,000 users, with individual PINs and card credentials.
How do I add a new user via the keypad?
Enter programming mode by pressing [#] + [Master Code]. Then press [1] and follow the prompts to assign a PIN or card.
What should I do if the Crane 2000-M displays a 'Tamper' error?
Check that the backplate is securely fastened and the tamper switch is properly aligned. Reset the alarm by entering a valid credential.
Can the Crane 2000-M be connected to a PC for event logging?
Yes, connect via RS-485 or Ethernet using the Dormakaba software. Event logs can be downloaded in CSV format.
What is the default master code for the Crane 2000-M?
The default master code is 1234. It is recommended to change it immediately after installation.
How do I clean the Crane 2000-M?
Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol, ammonia, or abrasive cleaners.
What is the maximum cable length for the Crane 2000-M?
For RS-485, maximum cable length is 1,200 meters; for Wiegand, keep it under 150 meters to avoid signal loss.
User questions about Crane 2000-M Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control in PDF format for free! Find your manual Crane 2000-M - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Crane 2000-M by Dormakaba.
USER MANUAL Crane 2000-M Dormakaba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dormakaba
Model : Crane 2000-M
Category : Access Control