Keyscan Indala - Access Control Dormakaba - Free user manual and instructions
Find the device manual for free Keyscan Indala Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Reader |
| Brand | Dormakaba |
| Model | Keyscan Indala |
| Technology | Proximity (125 kHz) |
| Read Range | Up to 4 inches (10 cm) |
| Dimensions (H x W x D) | 5.0 x 2.5 x 1.0 inches (127 x 63.5 x 25.4 mm) |
| Weight | 0.15 lb (68 g) |
| Power Supply | 5-12 VDC, 50 mA |
| Connectivity | Wiegand output (26-bit) |
| Environmental Rating | IP65 (weather-resistant) |
| Operating Temperature | -31°F to 150°F (-35°C to 65°C) |
| Compatible Cards | Indala proximity cards and fobs |
| Main Functions | Card reading, door lock control, LED status indication |
| Installation | Surface mount with included screws |
| Maintenance | Clean with dry cloth; avoid liquids |
| Security Features | Tamper detection, encrypted data transmission |
| Spare Parts | Mounting bracket, screw kit, cable harness |
| Warranty | 2 years limited |
| Certifications | FCC, CE, UL 294 |
Frequently Asked Questions - Keyscan Indala Dormakaba
How do I install the Keyscan Indala reader?
Mount the reader on a flat surface using the provided screws. Connect the Wiegand wires to your access control panel (typically red for power, black for ground, green for data, white for LED). Ensure power is off during wiring.
What types of cards are compatible?
The reader works with Indala proximity cards and key fobs operating at 125 kHz. Check the card format (e.g., 26-bit) to ensure compatibility with your system.
How do I change the LED color?
The LED behavior is controlled by the access control panel. Typically, a green LED indicates granted access, red indicates denied. You may need to configure the panel's output settings.
What is the read range?
The typical read range is up to 4 inches (10 cm) depending on the card and environmental conditions. Ensure no metal objects are near the reader.
Can I use this reader outdoors?
Yes, the reader has an IP65 rating and is weather-resistant. However, avoid direct exposure to heavy rain or submersion.
My reader is not reading cards. What should I check?
First, verify power (should be 5-12 VDC). Check wiring connections for loose or reversed wires. Ensure the card is held close to the reader surface. If still not working, test with another card.
How do I reset the reader to factory settings?
The reader typically does not have a reset button. Configuration is handled by the access control panel. Refer to the panel's manual for resetting enrollment.
What is the maximum cable length from the reader to the panel?
For reliable Wiegand communication, keep the cable under 500 feet (150 m) using 22 AWG shielded wire. Longer runs may require signal boosters.
Is the reader compatible with other brands' access control systems?
Yes, the Wiegand output is a standard protocol. Most access control panels that accept 26-bit Wiegand should work, including those from HID, Lenel, and Mercury.
How do I clean the reader?
Wipe the surface with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. For stubborn dirt, use a slightly damp cloth and dry immediately.
User questions about Keyscan Indala Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control in PDF format for free! Find your manual Keyscan Indala - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Keyscan Indala by Dormakaba.
USER MANUAL Keyscan Indala Dormakaba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dormakaba
Model : Keyscan Indala
Category : Access Control