EIP-X5500 - Video projector EIKI - Free user manual and instructions
Find the device manual for free EIP-X5500 EIKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | EIKI |
| Model | EIP-X5500 |
| Display Technology | 3LCD |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3500 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Lamp Life (Normal/Eco) | 3000h / 4000h |
| Lamp Power | 230W |
| Projection Lens | Manual Zoom & Focus |
| Keystone Correction | Vertical ±30° |
| Inputs | HDMI, VGA, S-Video, Composite, Audio |
| Outputs | VGA, Audio Out, RS-232 |
| Dimensions (W x D x H) | 325 x 260 x 110 mm |
| Weight | 3.5 kg |
| Power Consumption | 310W (max), <1W (Standby) |
| Noise Level | 35 dB (Normal), 29 dB (Eco) |
| Safety Features | Kensington Lock, Auto Shutdown |
| Cleaning & Maintenance | Clean air filter every 100 hours; replace lamp after 3000 hours |
| Repairability | User-replaceable lamp and filter; service by qualified technician for internal components |
Frequently Asked Questions - EIP-X5500 EIKI
How do I replace the lamp in my EIKI EIP-X5500 projector?
Turn off the projector and unplug it. Wait 30 minutes for cooling. Remove the lamp cover screw (usually on the side), slide out the old lamp module, insert the new one (compatible lamp type: EIKI EIP-X5500 replacement lamp), and secure the cover. Reset the lamp timer via menu.
How often should I clean the air filter?
Clean the air filter every 100 hours of use. Use a vacuum cleaner or wash the filter with mild soap and water. Allow to dry completely before reinstalling. Replace the filter every 500 hours.
Can I connect my laptop to this projector?
Yes, use a VGA or HDMI cable (if available). Connect one end to your laptop's video output and the other to the corresponding input on the projector. Select the correct input source via the 'Source' button.
What is the native resolution of the EIP-X5500?
The native resolution is XGA (1024 x 768). It can also display resolutions up to 1920 x 1080 via scaling.
How do I adjust the keystone distortion?
Press the 'Keystone' button on the remote or control panel. Use the arrow keys to adjust the vertical keystone correction (±30°). For fine adjustment, use the menu settings.
What should I do if the projector overheats?
Check that the air filter is clean and the ventilation slots are unobstructed. Reduce ambient temperature if possible. If the problem persists, the projector may need servicing.
How do I factory reset the projector?
Go to the 'Setup' menu, select 'Reset' or 'Factory Defaults', and confirm. This will restore all settings to original values.
Can I use the projector on a ceiling mount?
Yes, the EIP-X5500 supports ceiling mounting. Use a compatible projector mount and ensure the ceiling can support the weight (3.5 kg). Follow the installation instructions for inverted projection and adjust rear/front projection settings accordingly.
What is the lamp life and how do I know when to replace it?
Lamp life is approximately 3000 hours in normal mode and 4000 hours in eco mode. The projector will display a warning message when the lamp is near end of life. You can check the lamp timer in the menu.
How do I clean the lens?
Use a soft, dry microfiber cloth. Gently wipe the lens in a circular motion. Do not use liquids or abrasive cleaners. If stubborn dirt remains, slightly dampen the cloth with lens cleaning solution.
User questions about EIP-X5500 EIKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual EIP-X5500 - EIKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EIP-X5500 by EIKI.