AP21 - Vacuum Cleaner GIRMI - Free user manual and instructions

Product Type	Mattress Vacuum Cleaner
Brand	Girmi
Model	AP21
Power Supply	AC 230V~50-60Hz, 300W
Dust Capacity	400 cc
Vacuum Pressure	10 kPa
UV Lamp	Yes
Filtration System	Metal mesh pre-filter + HEPA filter
Number of Filters	2
Filter Cleaning	Metal filter washable with water; HEPA filter rinse every 2 months
UV Lamp Cleaning	Every 5-6 months with soft dry cloth
Container Type	Transparent dust container
Protection Class	Class II (double insulated)
Usage	Mattresses, upholstery, cushions, sofas, fabrics
Spare Filters Model	Girmi AP22
Manufacturer	TREVIDEA S.r.l., Italy
Country of Origin	Made in China
Suction Hole	Yes
Vibrating Pads	Yes
Wheels	Front and back wheels

Frequently Asked Questions - AP21 GIRMI

How do I empty the dust container?

Unplug the unit. Remove the dust container by rotating it anticlockwise and pulling it out. Take it to a bin, extract the filters, empty the container, then clean the filters if needed. Reassemble by matching the square hole and rotating clockwise until locked.

How often should I clean the filters?

Shake the HEPA filter in a bin at least once a week. Rinse both the metal filter and HEPA filter with warm water every 2 months. Ensure all filters are completely dry before reassembling.

Can I wash the HEPA filter?

Yes, the HEPA filter can be rinsed with warm water. Do not use detergent. Let it dry thoroughly before use.

How do I clean the UV lamp?

Unplug the appliance. Remove the UV lamp cover plate by unscrewing the 2 screws. Clean the lamp gently with a soft dry cloth or cotton. Avoid touching the lamp with bare fingers. Replace the cover and screws.

What safety precautions should I take with the UV lamp?

Do not stare at the UV light source. Avoid concentrating the UV lamp on one point to prevent damage to the object being cleaned. Always turn off the unit before cleaning the lamp.

Can I vacuum liquids or sharp objects?

No. Do not vacuum liquids, sharp objects, flammable materials, acids, or hot items like cigarettes. Use only on dry surfaces.

What are the spare filter options?

Spare filter set model is Girmi AP22. Contact your reseller for purchase.

What is the power cord length?

The manual does not specify the exact length. It is recommended to fully unroll the cord before each use and avoid walking on it.

Why is the vacuum cleaner making unusual noise?

Unusual noise may indicate a full dust container or clogged HEPA filter. Empty the container and clean the filters as per instructions. If noise persists, check for blockages or contact service.

How do I dispose of the appliance at the end of its life?

Do not dispose of it with household waste. Follow local regulations for WEEE (Waste Electrical and Electronic Equipment). The crossed-out wheelie bin symbol indicates proper disposal.

USER MANUAL AP21 GIRMI

White Girmi vacuum cleaner with a red button and black tip, shown against a plain background (no text or symbols on device body)

Battimaterassi

Mattress Cleaner

ITA: INDICE

Simbologia.... p. 2

Safety instructions.... p. 8

General information....p. 10

Description.... p. 11

Assembly....p. 11

Switch on the unit....p. 12

Empty and clean the container....p. 12

Filters cleaning....p. 12

Cleaning UV lamp....p. 12

Maintenance and cleaning....p. 13

Technical features....p. 13

Waste of electric and electronic equipment (WEEE

Directive).... p. 18

ESPAÑOL......p. 13

CLASSI DI PROTEZIONE / PROTECTION CLASSES

ATTENZIONE RISCHIO DI SCOSSE ELETTRICHE NON ESPORRE A PIOGGIA E UMIDITA'

WARNING ELECTRIC SHOCK RISK DO NOT EXPOSE TO RAIN OR MOISTURE

ATTENZIONE: NON APRITE L'APPARECCHIO. ALL'INTERNO NON VI SONO COMANDI MANIPOLABILI DALL'UTENTE NE' PARTI DI RICAMBIO. PER TUTTE LE OPERAZIONI DI SERVIZIO RIVOLGERSI AD UN CENTRO DI ASSISTENZA AUTORIZZATO.

This symbol warns the user that un-insulated dangerous voltage inside the system may cause an electrical shock. Do not open the case.

Class II Appliance symbol. The double insulated electrical appliance is one which has been designed in such a way that it does not require a safety connection to electrical earth/ground.

Caution: this symbol reminds the user to read carefully the important operations and maintenance instructions in this owner's guide.

AVVERTENZE DI SICUREZZA

ENGLISH: SAFETY INSTRUCTIONS

The following are important notes on the installation, use and maintenance; save this instruction manual for future reference; use the equipment only as specified in this guide; any other use is considered improper and dangerous; therefore, the manufacturer cannot be held responsible in the event of damages caused by improper, incorrect or unreasonable use.

Before use, ensure the equipment is undamaged; if in doubt, do not attempt to use it and contact the authorized service center; do not leave packing materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within the reach of children as they are potential sources of danger; always remember that they must be separately collected. Make sure that the rating information given on the technical label are compatible with those of the electricity grid; the installation must be performed according to the

manufacturer's instructions considering the maximum power of the appliance as shown on the label; an incorrect installation may cause damage to people, animals or things, for which the manufacturer cannot be considered responsible thereof.

If it is necessary to use adapters, multiple sockets or electrical extensions, use only those that comply with current safety standards; in any case do not exceed the power consumption limits indicated on the electrical adapter and / or extensions, as well as the maximum power shown on multiple adaptor.

Do not leave the unit plugged; better to remove the plug from the mains when the device is not in use. Always disconnect from power supply if you leave it unattended.

Cleaning operations should be carried out after unplugging the unit.

If the unit is out of order and you do not want to fix it, it must be made inoperable by cutting power cord.

- Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.

- Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc.. Always store it in a dry place.

- Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center.

- This appliance can be used by children of 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning use of the appliance in a safe way and understand hazards involved; children shall not play with the

appliance; cleaning and user maintenance shall not be made by children without supervision.

- Children must not play with the appliance.

- Keep the appliance and its cord out of reach of children less than 8 years.

If the power cord is damaged, or in case of failure and / or malfunction do not tamper with the unit. The reparation must be done by manufacturer or by service center authorized by the manufacturer in order to prevent any risk. Failure to comply with the above may compromise the unit safety and invalidate the warranty.

This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shop offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments.

The appliance is not intended to be operated by means of an external timer or separate remote-control system.

Before every use, unroll the power cord.

Use original spare parts and accessories only.

Do not subject the product to strong impacts, serious damages may result. Do not use near or under flammable materials (like curtains), heat, cold spots and steam.

GENERAL INFORMATION

This appliance must only be used for cleaning mattresses, blankets, upholstery, cushions, sofas and other fabrics.

CAUTION: Do not vacuum sharp objects, liquids, flammable, explosive or hazardous to health materials, acids, combustible objects such as cigarettes or firebrands.

If you need to change a filter, make sure that the re-assembly is made properly and new filters are not wet or damp. In this case, wait for it to dry completely before assembling.

Do not expose the appliance to high temperatures and do not bring it closer to heat sources.

Never leave the appliance unattended while it is running. ATTENTION: This appliance contains a UV ray emitter. Do not stare at the light source.

It is recommended not to concentrate cleaning, using the UV lamp, on a single point to avoid damage to the object being cleaned.

Always use the button to turn on or turn off the cleaner. In case of overheating, if the unit produces smoke, smell or unusual noises, turn it off immediately and check that the pipe is free from obstacles. If the tube is free, contact the service center for fixing it.

To avoid serious damage, do not walk on the power cord. Disconnect the plug from the electrical outlet immediately after use. Additionally it is advisable to wind the power cord in order to ensure a better cleaning and to avoid any risk of damage.

Do not immerse the motor unit in water or other liquids, clean it with a damp cloth only. Frequently clean the dust container and the premotor filter.

Do not use the appliance if the dust bin is not installed. Use only on dry surfaces.

CAUTION: while the unit is running, do not approach the air inlet to ears, eyes, etc., or to fragile items such as vases, tools, electronic machines.

DESCRIPTION AP21

1. On/Off button

2. Handle

3. Motor housing

4. Dust container

5. Back wheels

6. Screws for lamp unlock

7. Power cord

8. UV lamp

9. Suction hole

10. Front wheels

11. Vibrating pads

ASSEMBLY

Remove the dust container.

Rotate the container (4) anti-clockwise and pull to extract it from motor housing.

Install the dust container

Match the square hole present on the container (4) with the hole present on the motor housing (3).

Insert the pin on the motor body into the joint on the container. Rotate the container clockwise until lock.

SWITCH ON THE UNIT

• Connect the plug. Take the product with one hand and switch on with the switch (1).
• Pass the appliance over the surface to be cleaned, slowly moving back and forward.
• After cleaning, always turn off the appliance before unplugging and storing.

ATTENTION: keep the vacuum cleaner well to prevent it from falling, damaging it or causing injuries.

EMPTY AND CLEAN THE CONTAINER

In order to ensure the best performances and having no losses in the air flow and cleaning power, periodically drain the container. CAUTION: before emptying and/or start cleaning the dust bin, unplug the unit from the main electrical outlet.

To empty the container, extract the container, take it above a bin and extract the filters from container (4), then empty the container and clean the filters. It is recommended to do this outdoors to avoid soiling the house when the dust comes out of the trash. Replace the container.

CLEANING FILTERS

This vacuum cleaner is equipped with a metallic filter and 1 HEPA filter, capable of retaining particles and small organisms such as mites and pollens. In this way the air re-emitted from the cleaner will be more healthy and clean. To maintain the performance of the vacuum cleaner clean the filters regularly.

• Release the container (4) and take the filtering system out of dust container.
• Go over a bin and beat the filter to drop the largest residues.
• Remove the metal filter by turning it anticlockwise and then pulling it.

a) The wire mesh filter can be washed with running water.
b) Clean the HEPA filter as described below.

At least once a week, shake the HEPA filter in the bin to get the dirt out.

At least once every 2 months, carry out a more thorough cleaning: rinse HEPA filter, metal filter and container with a soft brush and/or with warm water and DRY THEM THOROUGHLY.

CAUTION: Do not use detergent to clean the filter or the cover. The HEPA filter must be completely dry before using the vacuum cleaner.

After cleaning:

• Mount the metal filter on top of the HEPA filter, turning clockwise until it locks.
• Take the container and insert the filtering system.
• Refit the container to the motor body.

CLEANING UV LAMP

ATTENTION: make sure that the plug is unplugged from the electrical socket

Dust and stains on the lamp directly affect the penetration capacity of UV rays. The lamp needs to be cleaned every 5-6 months to keep it efficient.

Remove the UV lamp cover plate by unscrewing the 2 screws (6).

Do not touch the UV lamp with bare fingers, any imprint left affects the penetration of UV light. Take the lamp from the side lamp holder.

Clean the lamp gently using a soft, dry cloth, or by blotting with cotton.

After cleaning, replace the UV lamp cover plate and lock it using the 2 screws.

MAINTENANCE AND CLEANING

CAUTION: before starting any operation, unplug the unit from the electrical outlet.

Normally this vacuum cleaner is not noisy. But when the dust container is full or the HEPA filter is clogged, the noise emitted changes, so the suction power. In addition, thanks to the transparent container, you can see the amount of dirt making it very easy to understand when you need to empty the container. Even the filters should be cleaned periodically. These filters can also be damaged or exhausted (HEPA filter) and should be replaced with new filters. Emptying the dust container and cleaning the filters as stated in this booklet, you will avoid stressing the motor.

Clean the main body with a damp non-abrasive cloth, avoiding the use of aggressive detergents or abrasive cleaners, which could ruin the aesthetic parts of the device.

The cloth should not be too wet, since the water penetrating the device, can seriously damage it. Cleaning filters by following the specific instructions on this guide.

TECHNICAL FEATURES

• Power supply: AC 230V\~50-60Hz, 300W
• Dust capacity 400 cc
- Vacuum 10 kPa
- UV lamp

SPARE FILTERS: ask to your reseller the spare filter set, model Girmi AP22

The product is made of non-biodegradable and potentially polluting substances if not properly disposed of; other parts can be recycled. It's our duty to contribute to the ecological health of the environment following the correct procedures for disposal. The crossed out wheelie bin symbol indicates the product complies with the requirements of the new directives introduced to protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and must be properly disposed at the end of its lifetime. If you need further information, ask for the dedicated waste disposal areas at your place of residence. Who does not dispose of the product as specified in this section shall be liable according to the law.

To find the nearest service center, please call the telephone number 0541 694246, fax number 0541 756430 or contact us at [e-mail] asking for the service centers supervisor.

Appliance is conform to the pertinent European

regulation and is therefore marked with the CE mark.

www.girmi.it

TREVIDEA S.r.l.

TREVIDEA S.R.L. – Strada Consolare Rimini – San Marino n. 62 – 47924 – RIMINI (RN) - ITALY

MADE IN CHINA