Q: What does the error code E3 on the GIRMI PI51 mean?

The error code E3 (or E03) means inadequate electrical voltage . Your cooker detects that the voltage of the electrical network does not comply with the required specifications. Required electrical specifications: Power supply: AC 230V ~ 50Hz Maximum power: 3500W Solutions: Plug the device into an appropriate electrical circuit that provides a stable voltage of 230V, as indicated on the cooker’s label. Do not use a power strip : due to its high power, this cooker must be plugged directly into a dedicated wall outlet. If the error persists on multiple outlets, your electrical installation may have a voltage issue. Contact an electrician to check.

Q: What is the ideal milk temperature for using the GIRMI ML53 milk frother?

The GIRMI ML53 milk frother has several functions suitable for different milk temperatures, without imposing a specific mandatory temperature. The product offers four distinct operating modes: Coarse hot foam : the milk is heated and frothed to obtain a thick foam. Ideal for a cappuccino or a cream espresso. Dense hot foam : the milk is heated and frothed to obtain a fine and velvety foam. Perfect for a flat white or a cortado. Cold foam : milk taken from the fridge or at room temperature is frothed without heating. Suitable for iced drinks. Heating only : the milk is heated without being frothed, if you prefer plain hot milk. To achieve the best results with the hot foam modes, pour cold or room temperature milk into the container: the device will take care of simultaneous heating and frothing. Be careful not to exceed the lower MAX level marked on the container (150 ml maximum) when frothing, as the frothed milk may overflow and damage the internal circuits. For heating only, you can fill up to the upper MAX level (300 ml). Always pour the milk before turning on the device, then close the lid. The device will automatically stop once the cycle is complete. Wait for the frother to stop completely before pouring your frothed milk into your drink.

Question 1

What does the error code E3 on the GIRMI PI51 mean?

Accepted Answer

The error code E3 (or E03) means inadequate electrical voltage. Your cooker detects that the voltage of the electrical network does not comply with the required specifications.

Required electrical specifications:

Power supply: AC 230V ~ 50Hz
Maximum power: 3500W

Solutions:

Plug the device into an appropriate electrical circuit that provides a stable voltage of 230V, as indicated on the cooker’s label.
Do not use a power strip: due to its high power, this cooker must be plugged directly into a dedicated wall outlet.
If the error persists on multiple outlets, your electrical installation may have a voltage issue. Contact an electrician to check.

Question 2

How to use the GIRMI ML70 milk frother?

Accepted Answer

Preparation

Fill the container with fresh milk, respecting the limits: minimum 150 ml and maximum 250 ml. The total capacity is 250 ml. Close the lid before any use.

Two operating modes

Red light (Function 1): heats and froths milk, heats and mixes beverages, or heats milk only
Blue light (Function 2): froths cold milk or mixes without heating

The device automatically stops at the end of the cycle. You can stop it manually by pressing the button again.

Maintenance

Wash the container with water immediately after each use to avoid milk deposits. The container and accessories can be cleaned in the dishwasher. For the external base, use a damp cloth only - do not immerse the base in water.

Question 3

What is the ideal milk temperature for using the GIRMI ML53 milk frother?

Accepted Answer

The GIRMI ML53 milk frother has several functions suitable for different milk temperatures, without imposing a specific mandatory temperature.

The product offers four distinct operating modes:

Coarse hot foam: the milk is heated and frothed to obtain a thick foam. Ideal for a cappuccino or a cream espresso.
Dense hot foam: the milk is heated and frothed to obtain a fine and velvety foam. Perfect for a flat white or a cortado.
Cold foam: milk taken from the fridge or at room temperature is frothed without heating. Suitable for iced drinks.
Heating only: the milk is heated without being frothed, if you prefer plain hot milk.

To achieve the best results with the hot foam modes, pour cold or room temperature milk into the container: the device will take care of simultaneous heating and frothing. Be careful not to exceed the lower MAX level marked on the container (150 ml maximum) when frothing, as the frothed milk may overflow and damage the internal circuits. For heating only, you can fill up to the upper MAX level (300 ml).

Always pour the milk before turning on the device, then close the lid. The device will automatically stop once the cycle is complete. Wait for the frother to stop completely before pouring your frothed milk into your drink.

User manual GIRMI : user manuals and guides in PDF

Models GIRMI most viewed

Browse manuals GIRMI by appliance type

Recent questions about devices GIRMI