ST51 - Iron GIRMI - Free user manual and instructions
Find the device manual for free ST51 GIRMI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Steam iron |
| Brand | Girmi |
| Model | ST51 |
| Power | 2400 W |
| Input voltage | 220-240 V ~ 50/60 Hz |
| Water tank capacity | 300 ml |
| Continuous steam flow rate | Up to 40 g/min |
| Variable steam flow | Yes |
| Spray function | Yes |
| Soleplate | Ceramic soleplate |
| Auto shut-off | Yes, after 8 minutes of inactivity |
| Anti-calc system | Yes, built-in |
| Weight | 1.2 kg |
| Dimensions (L x W x H) | 30 x 15 x 15 cm |
| Cable length | 2 meters |
| Maintenance and cleaning | Clean soleplate with a soft cloth and descale regularly |
| Safety | Thermal fuse, auto shut-off, stable base |
| Spare parts and repairability | Available at Girmi after-sales service |
Frequently Asked Questions - ST51 GIRMI
How to fill the water tank of the Girmi ST51 iron?
Unplug the appliance, open the tank cover and pour tap water or distilled water up to the MAX mark. Do not exceed this level.
How to use the steam function?
Select the temperature suitable for the fabric, wait until the indicator goes off, then press the steam button. For continuous steam, hold the button down.
Why is no steam coming out?
Check that the tank has water and the temperature is sufficient. If the problem persists, descale.
How to clean the iron's soleplate?
Let the iron cool down, then clean the soleplate with a soft damp cloth. Do not use abrasive products.
How to descale the Girmi ST51 iron?
Mix one third white vinegar and two thirds water in the tank, heat the iron in steam position, then let it sit for 10 minutes. Then rinse with clear water.
What to do if the iron does not heat?
Check the plug and cord. If the heating indicator does not light up, the thermal fuse may have blown; contact after-sales service.
How does the auto shut-off work?
The iron turns off automatically after 8 minutes of inactivity in vertical position or after 30 seconds in horizontal position. Shake it to turn it back on.
Can I use tap water?
Yes, but to extend the lifespan, it is recommended to use distilled or demineralized water, especially if the water is hard.
How to store the iron after use?
Empty the tank, let it cool, wind the cord loosely, and store the iron in vertical position on a stable surface.
Where to find spare parts for the ST51?
Contact Girmi customer service or check their website. Common parts like the soleplate or tank are available.
User questions about ST51 GIRMI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual ST51 - GIRMI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST51 by GIRMI.
USER MANUAL ST51 GIRMI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIRMI
Model : ST51
Category : Iron