ST63 - Iron GIRMI - Free user manual and instructions
Find the device manual for free ST63 GIRMI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Steam iron |
| Brand | Girmi |
| Model | ST63 |
| Power | 2400 W |
| Supply voltage | 220-240 V, 50/60 Hz |
| Tank capacity | 350 ml |
| Soleplate material | Ceramic |
| Steam function | Continuous steam and steam shot |
| Continuous steam output | Up to 40 g/min |
| Steam shot | Up to 150 g/min |
| Auto shut-off | Yes, after 8 minutes of inactivity |
| Anti-scale system | Integrated |
| Power cord | 2 meters, 360° swivel |
| Weight | 1.2 kg |
| Dimensions (L x W x H) | 28 x 12 x 15 cm |
| Care and cleaning | Clean the soleplate with a damp cloth after cooling. Use the anti-scale function regularly. |
| Spare parts and repairability | Available via Girmi after-sales service. Repairability index: 8.5/10 |
| Safety | Auto shut-off, thermal fuse, insulated handle |
| General information | Girmi ST63 steam iron, ergonomic design, ideal for efficient and safe ironing. |
Frequently Asked Questions - ST63 GIRMI
How to turn on and adjust the temperature of the Girmi ST63 iron?
Plug in the iron, then turn the temperature adjustment knob located under the handle according to the fabric type (synthetic, wool, cotton). The indicator light turns on and goes off when the temperature is reached.
How to use the steam function?
Fill the water tank, select a suitable temperature (steam requires a high temperature). Press the continuous steam button or the steam shot button for a more powerful output.
What to do if the iron does not produce steam?
Check the water level in the tank, make sure the temperature is sufficient for steam (minimum 2 points). If the problem persists, clean the soleplate with the anti-scale function.
How to clean the iron's soleplate?
Let the iron cool down, then wipe the soleplate with a non-abrasive damp cloth. Never use chemical products. For stubborn residues, use the self-cleaning function.
What is the anti-scale function for?
It prevents limescale buildup in the steam circuit. Activate it regularly: fill the tank, set the iron to maximum temperature, then press the anti-scale button while tilting the iron over a sink.
How does the auto shut-off work?
The iron automatically turns off after 8 minutes in vertical position or 30 seconds in horizontal position. To reactivate, shake it or place it on its soleplate.
Can I use tap water?
Yes, but to extend its life, it is recommended to use a mixture of tap water and demineralized water (50/50). Avoid pure distilled water.
What to do if the iron does not heat up?
Check the electrical outlet and the cord. Make sure the temperature button is on. If the indicator does not light up, contact Girmi after-sales service.
How to store the iron after use?
Empty the water tank, let it cool completely, then wrap the cord around the heel. Store the iron upright on its heel.
Where to find spare parts for the Girmi ST63?
Spare parts (soleplate, tank, buttons) are available from Girmi after-sales service or on the official website. Use the model number ST63 to identify parts.
User questions about ST63 GIRMI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual ST63 - GIRMI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST63 by GIRMI.
USER MANUAL ST63 GIRMI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIRMI
Model : ST63
Category : Iron