ST04 - Iron GIRMI - Free user manual and instructions
Find the device manual for free ST04 GIRMI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Iron |
| Brand | Girmi |
| Model | ST04 |
| Power Consumption | 2000 W |
| Voltage | 220-240 V ~ 50/60 Hz |
| Cord Length | 1.8 m |
| Water Tank Capacity | 300 ml |
| Soleplate Material | Ceramic |
| Dimensions (W x D x H) | 30 x 15 x 12 cm |
| Weight | 1.2 kg |
| Steam Output (continuous) | 30 g/min |
| Steam Burst | Yes, up to 100 g/min |
| Spray Function | Yes |
| Dry Ironing | Yes |
| Self-Clean Function | Yes |
| Anti-Drip System | Yes |
| Anti-Calc System | Yes |
| Auto Shut-Off | Yes, after 8 min of inactivity |
| Swivel Cord | Yes |
| Maintenance | Regular descaling recommended; use distilled water to prevent scale build-up |
| Cleaning | Clean soleplate with non-abrasive cloth; empty water tank after use |
| Safety | Auto shut-off, heat-resistant base, compliant with CE standards |
| Spare Parts Availability | Replacement soleplates, water tank caps, and steam buttons available from Girmi or authorized dealers |
Frequently Asked Questions - ST04 GIRMI
How do I fill the water tank?
Open the water inlet cover, tilt the iron slightly, and pour water using a cup or directly from a tap. Do not exceed the 'MAX' level. Use distilled water for best results.
Can I use tap water in the iron?
Yes, but to prevent scale build-up, it is recommended to use a mixture of 50% tap water and 50% distilled water, or use demineralized water.
How do I activate the steam burst?
Press the steam burst button (usually marked with a small cloud icon) firmly. Wait a few seconds between bursts to allow the iron to reheat.
What should I do if water leaks from the soleplate?
If water leaks, the iron may not be hot enough. Set the temperature to a higher setting and wait until the indicator light turns off. The anti-drip system prevents leakage when the temperature is correct.
How do I clean the soleplate?
Unplug the iron and let it cool. Wipe the soleplate with a damp cloth. For stubborn stains, use a non-abrasive cleaner or a mixture of vinegar and water. Do not use scouring pads.
Does the iron have an auto shut-off feature?
Yes, the iron automatically shuts off after approximately 8 minutes of inactivity when left horizontally, and after 30 seconds if tipped over or left on its soleplate.
How do I use the self-clean function?
Fill the tank to 'MAX', set the iron to maximum temperature, and unplug it. Hold it over a sink, press the self-clean button, and allow steam and water to flush out scale. Repeat as needed.
What does the anti-drip system do?
The anti-drip system prevents water from leaking out of the soleplate when the iron is not hot enough. It automatically activates when the temperature is too low.
Can I iron delicate fabrics like silk?
Yes, set the temperature to the lowest setting (marked with a dot or 'silk' label). Use a pressing cloth to avoid direct contact, and do not use steam.
Where can I find replacement parts?
Replacement parts such as soleplates, water tank caps, and steam buttons can be ordered from Girmi's official website or through authorized service centers. Use the model number ST04 when ordering.
User questions about ST04 GIRMI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual ST04 - GIRMI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST04 by GIRMI.
USER MANUAL ST04 GIRMI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIRMI
Model : ST04
Category : Iron