004-732 - Multitool Meec Tools - Free user manual and instructions

Brand	Meec Tools
Model	004-732
Product Type	Multi-tool (oscillating tool)
Rated Voltage	230 V ~ 50 Hz
Rated Output	220 W
Safety Class	II (double insulation)
Weight	2.0 kg
Oscillation Frequency	20,000 /min
Oscillation Angle	3.2°
Sound Pressure Level (LpA)	81.7 dB(A), K=3 dB(A)
Sound Power Level (LwA)	92.8 dB(A), K=3 dB(A)
Vibration Level	3.332 m/s², K=1.5 m/s²
Applications	Sawing in soft materials, sanding wood/plastic/metal/paint, scraping paint/glue
Included Accessories	Saw blade, sanding pad, scraper blade, hex key, clamping screw, clamping ring
Power Cord	Not specified (standard mains cable)
Motor Cooling	Ventilation openings; clean regularly
Maintenance	Switch off and unplug before maintenance; clean with soft damp cloth; do not use solvents
Safety Features	Double insulation, insulated grips, safety switch, ear protection recommended
Standards Compliance	Machinery Directive 2006/42/EC, EMC 2014/30/EU, RoHS 2011/65/EU

Frequently Asked Questions - 004-732 Meec Tools

How do I change the accessory on the Meec Tools 004-732 multi-tool?

To change accessories, first switch off and unplug the tool. Use the supplied hex key to loosen the clamping screw, then remove the old accessory. Place the new accessory (e.g., saw blade, sanding pad, or scraper) onto the tool holder, align it, and tighten the clamping screw securely. Always wear safety gloves when handling accessories to avoid cuts.

Can this multi-tool be used for cutting metal?

Yes, the tool can cut soft materials and is suitable for sawing in wood, plastic, metal, and paint. However, for metal cutting, ensure you use a suitable saw blade designed for metal. Do not apply excessive pressure; let the tool do the work.

How should I clean the multi-tool?

Clean the ventilation openings regularly with a brush or vacuum cleaner to prevent overheating. Wipe the exterior with a soft cloth moistened with soapy water. Never use solvents like petrol, alcohol, or ammonia, and avoid letting water enter the machine.

What safety precautions should I take when using this tool?

Always wear safety glasses, ear protection, and a dust mask if needed. Keep the work area clean and well-lit. Avoid loose clothing and jewelry, and secure the workpiece firmly. Never touch the accessory during or immediately after use to avoid burns. Hold the tool by insulated grips to prevent electric shock.

The tool doesn't start. What could be wrong?

Check the power cord, plug, and fuse for any damage or loose connections. Ensure the outlet is working. If the tool still does not start, it may be defective. Contact your dealer for service. Do not attempt to repair it yourself as it may void the warranty.

What is the oscillation frequency and angle of this tool?

The tool oscillates at 20,000 strokes per minute with an oscillation angle of 3.2°. This high frequency and small angle allow for precise cutting and sanding even in tight spaces.

How do I replace the sandpaper on the sanding pad?

First, switch off and unplug the tool. Remove the old sandpaper from the sanding pad. Align the new sandpaper with the pad and press it firmly into place. Ensure the sandpaper is properly centered and adhered before use.

What is the weight and power of the Meec Tools 004-732?

The multi-tool weighs 2.0 kg and has a rated output of 220 W. It operates on 230 V / 50 Hz and is double insulated (Class II).

Can I use this tool for scraping paint or glue?

Yes, the tool comes with a scraper blade specifically for removing paint, glue, and other residues. Secure the workpiece, attach the scraper, and apply gentle pressure while moving the tool. Avoid overheating the tool by not pressing too hard.

Is ear protection necessary when using this tool?

Yes, ear protection is recommended. The sound pressure level is 81.7 dB(A) and sound power level is 92.8 dB(A). Prolonged exposure to these noise levels can cause hearing damage, so always wear ear protection.

USER MANUAL 004-732 Meec Tools

Exterior view of a power tool with attached circuit board and metal bracket (no text or symbols visible)

MULTIVERKTYG

Rat en hill and organ for her fllres.

Care for the environment!

Must not be discarded with household waste. This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority's recycling station.

Jula reserves the right to make changes. In the event of problems, please contact our customer service www.jula.com

Tilverkare/ Produsert/ Producesici/ Manufacture

Jula AB, Box 163, 512-24 SKARA

Distribuō/ Distribuō/ Oyārpludān/ Distribuō

Jula Pelanc Sp. 2010, u

Walborska 41, 08-28: Warsawa, Polska

Jula Marge AS, So hormsieren 6–8.

1471128-RSKDJ

2018-01-12

6183

EC DECLARATION OF CONFORMITY

EG FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EF SAMSVARSERKLÆRING

DEKLARACJA ZGODNOŚCI WE

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN

certify that the design and manufacturing of this product

Machinery Directive 2006/42/EC

EN 60745-1:2009+A11, EN 60745-2-4:2009+A11

Electromagnetic Compatibility Directive 2014/30/EU

EN 55014-1:2006+A1+A2, EN 55014-2:2015

EN 61000-3-2:2014, EN 61000-3-3:2013

RoHS Directive 2011/65/EU

EN 50581:2012

This product was CE marked in year -17

Name and address of the person authorised to compile the technical file. James Recksted Box 303, SE-532 24 Skara, Sweden

Two-step diagram showing a mechanical press or tool on a base and a hand holding a tool, both without any text or symbols.

SÄKERHETSANVISNINGAR

SÄKERHET I ARBETSOMRÅDET

Follded natural mid-anal E11

SIKKERHET I ARBEIDSOMRÅDET

BRUK OG VEDLIKEHOLD AV EL- VERKT∅YET

BEZPIECZEŃSTWO W MIEJSCU PRACY

SAFETY IN THE WORK AREA

• Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents and injuries.
• Do not use power tools in explosive environments, such as in the vicinity of flammable liquids, gases or dust. Power tools produce sparks that can ignite dust and fumes.
• Keep children and unlookers at a safe distance when working with a power tool. You can lose control of the tool if you are distracted.

ELECTRICAL SAFETY

• The plug on the power tool must match the power point. Never modify the plug in any way. Never use adapters with earthed power tools. Intact plugs and matching outlets reduce the risk of electric shock.
• Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There is an increased risk of electric shock if your body is earthed.
• Do not expose power tools to rain or moisture. There is a greater risk of electric shock if water gets into a power tool.
• Be careful with the power cord. Never use the power cord to carry or pull the power tool, or to pull out the plug from the mains. Keep the power cord away from heat, oil, sharp edges and moving parts. Damaged or tangled power cords increase the risk of electric shock.
• When you use a power tool outdoors, use an extension cord intended for outdoor use. Using cords intended for outdoor use reduces the risk of electric shock.

PERSONAL SAFETY

- Stay alert, pay attention to what you are doing, and use your common sense when working with power tools. Never use power tools if you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when using a power tool can result in serious personal injury.

- Use safety equipment. Always wear safety glasses. The correct use of safety equipment such as a dust filter mask, non-slip safety shoes, helmets and ear protection, reduces the risk of personal injury.

- Avoid accidental starting. Check that the power switch is in the OFF position before connecting to the mains and/or the battery, or lifting/carrying the tool. Carrying a power tool with your finger on the switch, or connecting a tool to the mains supply when the switch is in the ON position, increases the risk of accidents and injuries.

- Remove all Allen keys/spanners etc before switching on the power tool. A spanner left in a rotating part of the power tool can result in personal injury.

- Do not overreach. Always maintain a firm footing and good balance. This will ensure you have better control over the tool in unexpected situations.

- Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose-fitting clothing, jewellery and long hair can get caught in moving parts.

- If dust extraction and dust collection equipment is available, this should be connected and used correctly. The use of such devices can reduce the risk of

USING AND LOOKING AFTER POWER TOOLS

• Do not force the power tool. Use the correct power tool for the planned work. The correct power tool will work better and more safely when used with the load for which it was designed.
• Do not use the power tool if it cannot be switched on and off with the power switch. Power tools that cannot be controlled with the power switch are dangerous and must be repaired.
• Unplug the plug from the mains and/or remove the battery from the power tool before making any adjustments, replacing accessories or putting the tool away. These safety precautions reduce the risk of accidentally starting the power tool.
• Store power tools out of the reach of children when not in use. Never allow anyone who is unfamiliar with the power tool and these instructions to use the tool. Power tools are dangerous in the hands of inexperienced users.
• Keep the power tool properly maintained. Check that moving parts are not misaligned, jammed or loose, and that there are no other factors that could affect the safe use of the tool. If the power tool is damaged, it must be repaired before being used again. Many accidents are caused by poorly maintained power tools.
• Make sure that cutting tools are sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
• Use the power tool, accessories and bits etc., in accordance with these instructions, taking into account the actual working conditions and the work that is to be done. Using the power tool for anything other than its intended purposes can lead

SERVICE

Make sure that the power tool is serviced by qualified technicians that only use identical spare parts. This will ensure that the power tool remains safe to use.

SPECIAL SAFETY INSTRUCTIONS

• Only use accessories recommended by the manufacturer. The use of other accessories can result in a risk of personal injury.
• Only use the tool for dry sanding. There is an increased risk of electric shock if water gets into a power tool.
• Find out whether sending the surface in question can product toxic dust and/or fumes. Dust/fumes from wood, metal and paint etc. can cause allergic reactions and/or can be harmful to health. Observe special care and avoid inhaling and skin contact with such materials. Materials that contain asbestos should only be handled by qualified personnel.
• Keep your hands away from the cutting area and blade. Holding the tool with both hands prevents them from coming into contact with the blade.
• Do not put your hands under the workpiece. Contact with the blade can cause personal injury.
• Start the tool before applying the blade to the workpiece. If the blade jams it can slip or kick back from the workpiece when the tool starts.
• Never hold the workpiece in your hands or across your legs. Secure the workpiece on a stable surface. It is important to support the workpiece properly so that body contact is minimised, the blade does not iam, and you do not lose control.

EN

produce more friction, which can cause the blade to jam and increases the risk of kickback.

• Take extra care when plunge cutting in walls or other similar areas where you cannot see what lies behind. The protruding blade may strike objects that can cause kickback.
• The work area should be well ventilated.
- Wear safety glasses.
- Wear ear protection.
- Wear a dust filter mask if the work produces a lot of dust.
- Wear safety gloves.
- Wear a hair net if you have long hair.
- Do not wear loose-fitting clothes, jewellery, or watches etc. that can fasten in moving parts.
- If dust extraction and dust collection equipment is available, this should be connected and used correctly. Clean the ventilation openings regularly. The accumulation of metal dust can cause the metal parts of the tool to become live – risk of electric shock.

ADDITIONAL SAFETY INSTRUCTIONS

• Hold the power tool by the insulated grips when working in areas where the tool may come into contact with concealed electrical cables or its own power cord. Contact with a live cable will cause the metal parts on the tool to also become live – risk of electric shock.
• Before starting work on walls, ceilings or floors, check that there are no concealed electrical cables or conduits. Use a live wire detector, or ask an electrician for help. Failure to observe these instructions could result in the risk of fire protection.

e.g. as a result of a power cut or if the power cord is pulled out.

• Secure the workpiece. Secure the workpiece with clamps or a vice. Never hold the workpiece with your hand.
• Keep the work area clean. The mixing of dust from different materials is especially dangerous. Dust from light metals, e.g. aluminium, can ignite or explode.
• Do not use the tool if the power cord is damaged. Pull out the plug immediately if the cord is damaged when working. Do not pull the power cord to disconnect the plug from the mains socket. Damaged power cords increase the risk of electric shock.
• Avoid overhealing the tool and workpiece – risk of material damage.
• Do not touch accessories during or immediately after use – risk of burn injury.
• Never clean hot tools with flammable agents – risk of fire and/or explosion.
• Keep the handles clean, dry and free from oil and grease. Greasy handles make it difficult to hold the tool – risk of personal injury and/material damage.
  • In addition to these instructions, you should always comply with local regulations and laws concerning health, safety and the environment.
• Do not remove or cover symbols and markings on the product. Replace any stickers that have become illegible or lost.

REMAINING RISKS

Even if appropriate safety regulations are adhered to and safety devices are used, it is not possible to eliminate all risks. The following risks remain:

VIBRATION

Follow the instructions below to reduce the risk of personal injury as a result of vibrations:

• Maintain the tool in accordance with these instructions.
• Avoid working at low temperatures.
• Keep your body and especially your hands warm.
  • Take regular pauses and move your hands to stimulate circulation.

IMPORTANT:

Risk of personal injury as a result of vibration. Vibrations from power tools can cause personal injury. Stop working immediately and seek medical attention if you experience numbness, itching, tingling or pain, or if your skin changes colour. Vibration levels can deviate from the declared value, depending on how the tool is used. The following factors can influence the level of vibrations:

• Incorrect/unsuitable use.
• Unsuitable accessories.
  • Working with unsuitable materials.
• Inadequate maintenance.

Symbols

The following symbols provide guidance for how to use your power tool. Make sure you understand the symbols and their significance.

This product has a safety class II rating. This means it is fitted with extra or double insulation.

Approved in accordance with the relevant ELL directions.

Read the instructions.

Recycle as electrical waste.

TECHNICAL DATA

Rated voltage 230 V / 50 Hz

Rated output 220 W

Safety class II

Weight 2.0 kg

Oscillation frequency 20000/min

Oscillation angle 3.2°

Sound pressure level, LoA 81.7 dB(A), K=3 dB(A)

Sound power level, LwA 92.8 dB(A), K=3 dB(A)

Vibration level 3.332 m/s², K=1.5 m/s²

Always wear ear protection.

The measurement values have been determined in accordance with EN ISO 3744, EN ISO 11203, EN ISO 5349-1, EN ISO 5349-2.

The declared value for vibration and noise, which has been measured by a standardised test method, can be used to compare different tools with each other and for a preliminary assessment of exposure.

WARNING!

It is therefore necessary to determine which safety precautions are required to protect the user, based on an estimate of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the start-up time).

DESCRIPTION

The following are included in the packaging.

1. Clamping screw

2. Clamping ring

3. Power tool

4. Sandpooer

5. Sending pad

6. Saw blade

/. Scraper

1. Hex key

FIG. 1

APPLICATIONS

The tool can be used for sawing in soft materials and sanding of wood, plastic, metal and paintwork. It can also be used to scrape off layers of paint and residual glue.

FUNCTION

The tool vibrates with an oscillating action at speeds of up to 20,000 strokes per minute. This enables the tool to penetrate material with a high degree of precision and without excessive force, even in confined spaces.

EN

ASSEMBLY

WARNING!

- Do not touch the tool during or immediately after use – risk of burn injury. Never clean hot tools with flammable agents – risk of fire and/or explosion.

- Wear safety gloves when handling the tool – risk of cut injuries.

FITTING TOOLS

Scraper blade

FIG. 2

Sanding pad

FIG. 3

Sandpaper

1. Hit the sanding pad on the tool holder.

2. Align the sandpaper to the sanding pad and press in place.

USE

Work with a gentle and uniform contact pressure. Move the power tool backwards and forwards to avoid getting the tool too hot or jamming/fastening in the workpiece.

NOTE:

- The motor can overheat during prolonged use, excessive pressure, and/or low speed. Run the motor with no load at high speed to allow it to cool.

STARTING/STOPPING

Move the switch forward to start the machine. Move the switch back to switch off the machine.

SAWING

1. Make sure that the workpiece is properly secured. Never hold the workpiece with your hand, knee or against other parts of your body when working. Do not work on workpieces that are too small to be firmly secured.
2. Switch on the multi-tool and bring the saw blade against the workpiece. Do not press too hard when working because this will not speed up the result and will risk overheating the multi-tool instead.

SANDING

NOTE:

The multi-tool must only be used for dry sanding of wood and metal.

1. Use a sandpaper suitable for the actual job.
2. Make sure that the workpiece is properly secured. Never hold the workpiece with your hand, knee or against other parts of your body when working. Do not work on workpieces that are too small to be firmly secured.
3. Switch on the multi-tool and bring the sandpaper against the workpiece. Do not press too hard when working because this will not speed up the result and will risk overheating the multi tool instead.
4. Make sure all of the pad is pressed against

SCRAPING

The supplied scraper can be used to remove paint, glue and scraps of food, etc.

1. Make sure that the workpiece is properly secured. Never hold the workpiece with your hand, knee or against other parts of your body when working. Do not work on workpieces that are too small to be firmly secured.
2. Switch on the multi-tool and bring the scraper against the workpiece. Do not press too hard when working because this will not speed up the result and will risk overheating the multi-tool instead.

MAINTENANCE

NOTE:

Switch off the tool, pull out the plug, and wait until all moving parts have completely stopped before maintenance. It is not possible to replace a damaged power cord and therefore the power tool must be discarded in accordance with local regulations for recycling.

CLEANING

• Clean the ventilation openings on the motor from dirt and dust when necessary, otherwise the motor can overheat. Use a brush or vacuum cleaner.
• Wipe the tool with a soft cloth moistened with soap and water. Never use solvents such as petrol, alcohol, or ammonia, etc

NOTE:

Make sure that no water or other liquid gets into the machine.

Problem Possible cause Action
The tool is not working.	No power supply.	Check the power cord, plug, power point and fuse.
	The tool is defective. Contact your dealer.
Poor action when sawing/sanding	Unsuitable accessory for the actual material.	Fit suitable accessory.
	The accessory is worn. Fit a new accessory.

Do not attempt to dismantle or repair the tool. Repairs that are not done correctly will invalidate the warranty.