Diver SEL06001H0 - Wristwatch ORIENT - Free user manual and instructions

Product Type	Automatic Mechanical Watch
Brand	ORIENT
Model	Diver SEL06001H0
Water Resistance	200 m (Air Diving)
Movement Type	Automatic winding with hand-winding mechanism
Jewel Count	22 jewels
Frequency	21,600 vibrations per hour
Power Reserve	More than 40 hours
Daily Accuracy	+25 to -15 seconds
Functions	Hour, minute, second hands; date display; power reserve indicator
Bezel	Unidirectional rotating bezel with elapsed time indicator
Crown	Screwed-down crown
Luminous	Luminous hands and markers
Case Material	Stainless steel (estimated)
Crystal	Mineral glass or similar (estimated)
Strap/Bracelet	Diving strap or metal bracelet (not specified)
Dimensions	Not specified in manual
Weight	Not specified in manual
Care & Cleaning	Rinse with fresh water after diving; wipe dry; avoid chemicals
Safety Precautions	Do not operate crown underwater; avoid shocks; keep away from strong magnetism
Spare Parts & Repairability	Contact ORIENT Service Center for repairs
Intended Use	Air diving only; not for saturation diving

Frequently Asked Questions - Diver SEL06001H0 ORIENT

Is the ORIENT Diver SEL06001H0 suitable for scuba diving?

Yes, it is water-resistant up to 200 m and designed for air diving. However, it cannot be used for saturation diving (with helium gas).

How do I set the time and date on my watch?

First, unscrew the crown by turning it counterclockwise. Pull it out to the second click to set the time, or to the first click to set the date. Avoid setting the date between 10:00 p.m. and 2:00 a.m. to prevent damage. After adjustment, push the crown in and screw it tightly.

How does the automatic winding mechanism work?

The watch winds automatically as you move your arm while wearing it. You can also manually wind it by turning the crown clockwise about 20 times from a stopped position. The power reserve indicator shows the remaining run time.

What is the power reserve of this watch?

When fully wound, the watch runs for more than 40 hours. The power reserve indicator shows an approximate remaining time.

How do I use the rotating bezel?

Rotate the bezel to align the triangular mark with the minute hand. As time passes, you can read elapsed minutes from the bezel. The bezel only turns counterclockwise to prevent accidental misadjustment.

What maintenance is required after diving?

After diving, ensure the crown is tightly screwed, then rinse the watch with fresh water to remove salt or sand. Dry with a soft cloth, especially the bezel and bracelet connections.

Can I wear this watch in a sauna or hot shower?

No, avoid high temperatures as they can cause malfunction. The watch operates normally between 5°C and 35°C.

What should I do if the watch fogs up inside?

Temporary fogging due to temperature changes is normal and will disappear. If it persists or moisture is present, contact an ORIENT Service Center.

Is the watch resistant to magnetism?

Exposure to strong magnetic fields can affect accuracy. If the watch speeds up or slows down, move it away from the magnetic source and reset the time. It is not anti-magnetic.

How accurate is this mechanical watch?

The daily accuracy is within +25 to -15 seconds under normal wearing conditions (room temperature, fully wound, dial up). Actual accuracy depends on usage.

USER MANUAL Diver SEL06001H0 ORIENT

WATER RESISTANT MECHANICAL WATCHES

FOR AIR DIVING EL(40N)

INSTRUCTION MANUAL

Thank you for choosing our product. To ensure prolonged use and optimum

performance, please read the instruction manual dictionary and hardware

your-cell with this term of this guarantee. Please keep this instruction manual handy for future reference.

▲ SAFETY PRECAUTIONS

- SAFETY PRECAUTIONS Makes absolutely sure to observe the democrated contents indicated below to

prevent any possible physical danger and property damage to you as well as others people concerned.

A demonstration with this symbol represents the contents.

assuming possibility for death or serious injury

when the product is used in any more different form

given instructions.

A demonstration is the symbol represents the contents.

assuming possibility of causing human injury or

material damage only when a product is used in any

manner different from given instructions.

◆ IN HANDLING THE WATCH

WARNING

(1) Water-resistance

This watch is water-resistant up to 200 m for use in air diving. * This watch can only be used in air diving; please be aware that it cannot be used in saturation diving (using bellum care).

② The crown is a surveyed-down type. Always tighten the crown securely when using this watch. If the crown is not securely tightened, water resistance cannot be guaranteed.

③ On not ascend the crown while in water or there is water on the watch. Water will penetrate the watch. If the crown is loose, water may enter the watch and causes a malfunction.

④ There is a small amount of humidity inside the watch. If osema temperature is lower than inside the watch, the glass may fog. Temporary fogging will not damage the internal mechanism but if it remains for a long time or if there is moisture inside the watch, consult the shop where you purchased the watch or the nearest ORIENT WATCH Service Center.

(2) Precautions before diving

Make sure to do the following before you dine

① Check that the watch is fully wound.

(if not, wind the mainsiding by swinging the watch for at least 30 seconds.)

See the description of the ◆ AUTOMATIC WINDING MECHANISM WITH

HAND WINDING MECHANISM) on page 26 and ◆ POWER RESERVE INDICATOR on page 29.

② Make sure the watch shows the correct time.

③ Check that the rotating bezel can be turned normally. If it can be turned

couplackwise, for rotation direction is normal

④ Check that the signed drug has been in account established.

③ Check dis, dis sclewso coa1 type crown is socially digital red. ④ Make sure that there are no precise or choice in the class or logoslotistrop

③ TANK SINK, that the Bank has no interest in the past 10 years of cash management.

⑥ Make sure that there are no conformities in the bracesor strap links [spring for and buckles].

* If there are any abnormalities, stop using the watch and contact the ORIENT WATCH Service Center.

(3) Precautions during diving

① Do not operate the crown while in the water.

② The rotating bench may be hard to operate under water due to water pressure. (This is not a malfunction.)

(3) Do not subject the watch to shocks, such as banging on rocks.

(4) Precautions after diving

① Do not operate the crown while there is water on the surface of the watch.

② To remove salt water from the case or bracelet strap, first make sure the

crown is securely tightened. Then, rinse it with fresh water to prevent malting.

After rinsing, vases with a soft dry cloth in remines any mucins. Its

especially careful to wipe off the bezel and the bracelet/strap connecting section (spring bar and bucket).

(5) Shock

① Do sure not to carry the watch when you engage in erroneous

sports, whereas playing such light sports as golf. etc.. will not

② found a vickel shoe, such as dropping the watch on the

(●) Fixed a victim index such as cropping the victim on the floor.

(6) Magnetism

① If the watch is left at a location with strong magnetism for an extended period of time, the components may be recognized, resulting in

penses of time, the components may be manufactured, reaching in dysfunction. Successful

② The watch may temporarily speed up or slow down when exposed to separation. Reason is returned when placed away from motion in

magazine. Presection 3: Rescued with packed away from magazine, in such a case, reset the time.

(7) Vibration

The welch may lose precision if subjected to strong

vibrations such as from riding motorcycles, using

in environments below and above curved temperatures (5°C-35°C). The

watch may malfunction and stop

A

CAUTION

1

Do not use the watch at high temperatures, such as in a sauna. The watch

(B) Chemicals, Gases, etc.

Unmost caution must be exercised when coming into contact with cases.

mercury chemicals (point flower, gasoline, various solvents, deterpants

containing such components, adherence, paint, drugs, perfumes.

cosmetics, etc.), and so forth. Such may cause cloaceration of the

weichase, watchend, and der face. Discorrelation, chromotion, and

(10) About the Product and Accessory Parts

A

CAUTION

Do not attempt to disassemble or modify this product

(1)

WARNING

△

Store the braccislabp pin and other small parts cut of the reach of

chicken. If any small person are swallowed, immediately contad a odor.

(11) Allergic reactions

If you develop a skin rash or your skin becomes abnormally irritated due

to be able to use water or soap, slip boiling the water remittently and consult a doctor.

(12) About "luminous ligh"

This watch has luminous light on the bands and clai.

The luminous light is a safe paint that stones sunlight and artificial light without using any reductive material, and emits that light in a dark setting. As the paint discharges the stored light, it will become dimmer over time. The amount of light emitted and the time that light is emitted depends on various actions when the light is stored, such as the shape of the glass, the thickness of the paint, surrounding brightness level, the distance from the water to the light source, and the light absorption level. Please note that when not enough light energy is stored, the watch may emit weak light or cool light for only a short time.

Before using the watch for diving, apply sufficient bright light or sunlight

to the watch.

Light may not be omitted in certain cases if light is insufficient.

(59) Water resistant watchbond.

Some products employ leather and nylon bands on which a special treatment to resist perspiration and water absorption have been applied. Please understand that the water resisting effect of this watchband can be lost depending on the period and conditions of use.

◆ PRODUCT FEATURES

(1) This product is an automatic winding mechanical watch (with a hard

winding mechanism!

(2) In addition to showing the time, this watch has a data indicator and power

reserves indicator.

(3) It comes with a second hard belt mechanism.

(6) It was check proof (passing to protect the lockee from checks

[3] This price is not applicable to the above.

(3) THIS MAIN THE WORK?

◆ SPECIFICATIONS

(1) Functions: hour/minute/second hands, date, and power reserve indicator

(2) Exploration: 21,800 kiloctol

(2) VENALATE: 21 sec (45 min) until (3) Date are given: 28 sec. in -18 sec

(3) Deliy 800000.25 650, 0-15 650

(4) Drive system: maintaining winding (automotive winding;

(5) Number of Jews: 22 pupils

(5) Running time: More than 40 hours

The stated daily securities is in the following conditions:

• After 24 hours at room immuno-ium with the majorcrane wound lub and the

That 24 hours of room temperature that the opening is usually too cold and

an facing up.

1. In the characteristics of the kinetic weighting analysis, the this may

deviate from the stated "cally accuracy" depending on the following

conditions: amount of time the watch is worn each day, position of the

watch, movement of your arm, winding condition of the manspring.

Product specifications may change without notice, for improvement.

- https://a.2017.2023/106-Changwe-2017-0378, 24-1-Praximent:

BEFORE USE

▲

WARNING

1

* Never perform operations not instructed in this manual while diving.

* This watch is for use in air diving. Refrain from using it in saluration diving

Before doing, makes sure you have taken the necessary doing safety courses and are qualified to dive safely. Strictly follow the rules given in
Measurement characteristics for climate diving are very different from ordinary sea level diving, making it very dangerous in comparison. Make sure you have received special training.
* Use the following basic only for reference. * For actual use, use this watch together with other equipment in order to dive safety;
◆ NAMES AND FUNCTIONS OF INDIVIDUAL COMPONENT PARTS

* The portion of the crown, title indicator, etc., views from most in model

♦ AUTOMATIC WINDING MECHANISM (WITH HAND WINDING MECHANISM)

(1) This is an automatic winding mechanical watch (with a hand winding mechanism).

(2) The mansping is wound by natural movements of your arm when wearing the watch on your wrist. In addition, you can also wind the menspring by turning the crown.

(3) If your watch stops, either swing the watch back and forth ten or more times or turn the crown to wind the mainspring in order to restart the second hand.

After it stands missing, and the calendar set turns (4) When winding the manspring, slowly turn the crown to the right (clockwise), while in its normal position.

Turning the crown to the left (counter-clockwise) merely turns the crown oclosely and does not wind the mainspring. You can wind the mainspring fully by turning the crown to the right about twenty times from a stopped position. The crown can still be turned after the mainspring is fully wound. Either use the above count or use the mornings on the power reserve indicator when winding the weld.

(5) This watch will run approximately 40 hours after it is fully wound. If it is not wound enough, the watch may lose accuracy. In order to maintain the watch's accuracy, we recommend wearing the watch at least 5 hours a day.

CAUTION: Use caution

In order to use the watch and maintain precision, we recommend that you hold the watch securely as shown above. Wind the spring by moving your arm left and right in a large arc, until the power reserve hand is at the middle of the power range (or higher), then put it on your wrist.

◆ MODELS WITH SCREWED-DOWN CROWN

The type of watch has a screwed-do

Operate this type of watch as follows: (1) Before action the cels and time, first run the crew to the left in place.

(1) the CAE should be called at a time, that can't have a claim to use all 12 days. For every day,

(2) After setting the date and time, turn the order to the right write pressing

in, until it stops turning to security tighten the screw.

♦ HOW TO SET THE TIME & DATE

[How to set the time]

[There is not the mind]

① Turn the crown checkbackwise to be seen the screw lock. Pull the crown put to the second disk.

when the hand reaches the 12 o'clock

position (Secure hard slope

Since this water comes with a calendar.

The main exercise is Dr. Denny, which

叫大叫

When setting the time, first bring the

head back slightly later than the acute

time and then move it forward to the

actual time.

⑧. Force the event is to the recommendation

position.

After scouting the line turn the crown

clockwise while pressing in und. it slopes

turning to tighten the screw securely.

27

[How to set the date]

CAUTION

A book setting the date between 10:00 a.m. and 2:00 a.m. since the calendar changes during this time. If the date is set during this time period, the date may not change or the watch may malfunction. Be sure to move the hour and minute hands away from this time period when setting the date.

Turn the crown counterclockwise to loosen the screw lock. Pull the crown out to the first click. * The crown on this watch can be pulled out to the first and second clicks.

②. Turn the crown counterlockwise until you reach today's date.

1. Does the crown it to the increased position. After adjusting the date, turn the crown chocolate while pressing in until it stops turning to tighten the screw security. *The position of the crown, date indicator, etc., varies from model to model. About date correction at month's end: Date correction is necessary for months will set the date to the [1st day] on the first day.

◆ POWER RESERVE INDICATOR

The power recovery indicator shows how much the watch is wound, allowing you to see how much longer the watch will run at a glance. The time pointed to by the power reserve hand is the remaining time.

The remaining time shown is only an exponential on. The time shown may be different from actual remaining time.

The product has an automicrostrating system which comes with a power reserve indicator function. The monitoring will be automatically wound by your natural arm movements while you wear it on your wrist. The power reserve hand is pressing to the fully-wound position (30ft). The amount the watch is wound will change with the frequency of your arm movements and the length of time you wear the watch, so the hand will not always point to the fully-wound position. If you remove the watch from your arm and do not wind manually, the power reserve hand will move toward zero as time passes.

广力云智慧零售收银系统

-

2

1

5

2

◆ HOW TO USE THE ROTATING INDICATOR RING

Turn the ring by pointing the v mark to the minute-hand. While certain time goes by, you can measure the elapsed time from the distance between minute-hand and figure on the rotating indicator ring. You can also set the v mark as a desired time to remind you how long time is still remain for an appointment.

You cannot turn the ring reversely since it comes with a protection mechanism for preventing wrong operation by force or shock. Figures on the ring could also help you to read the current time easily.

The show shows that 20 minutes have elapsed from 10:12.

ESPAÑOL

(2) Precious: 21,000 elsewhere?

(3) Precision brand (garancio-pericida) +25—15 segundos

portals (or bid), movements of all fields, transitions on the channel for sounds ('circuit', air).

more in 2 ps, 40

The image is too blurry to recognize any text content.

The following table is in Chinese:

♦ CÓMO USAR EL ANILLO INDICADOR GIRATORIO

(2) In addition to showing the time, this watch has a cold indicator and power reserve indicator.

(2) Quarto ocracker

(a) codium oroligo a peruvian cun indicatariati cf. alwaz, cun la scutia di secanti

[3] Precision cieclation (cucibacinscils): +25\~+15 second

(3) 10% of long-term to 10% of the

primarily, the range of Pa

1. Four days, the analyst's performance is positive and positive.

In addition of the following of the following: the results of the

are cos-60 is tenets reglunge is

posizione data of

② Buizare la crepa in serao crejo e

impostare l'oca corrante

In this case, a course of

The following table is in Chinese:

a qu'uso amese di busile, in queso: musi la vio exi ovidita saidamale.

Concentra a non-contralment that the issue.

m = 311

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none exist in the GT. Hence, the result is inconsistent with the Ground Truth.

7.2.1.4

→

(五) 4

[Non-Text]

[Non-Text]

53

[Non-Text]

[Установка даты]

ВНИМАНИЕ