Diver SEL02003W0 - Wristwatch ORIENT - Free user manual and instructions
Find the device manual for free Diver SEL02003W0 ORIENT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wristwatch |
| Brand | ORIENT |
| Model | Diver SEL02003W0 |
| Movement | Automatic (self-winding) |
| Case Diameter | Approximately 43.5 mm |
| Case Thickness | Approximately 13.5 mm |
| Case Material | Stainless steel |
| Band Material | Stainless steel bracelet |
| Water Resistance | 200 meters (20 ATM) |
| Crystal | Mineral crystal |
| Power Reserve | Approximately 40 hours |
| Functions | Time, date, unidirectional rotating bezel |
| Features | Luminous hands and markers, screw-down crown |
| Dial Color | White |
| Power Supply | Automatic movement with self-winding mechanism |
| Cleaning | Wipe clean with a soft, dry cloth |
| Maintenance | Periodic servicing every 3-5 years recommended |
| Safety | Do not operate crown or buttons while underwater |
| Spare Parts | Authorized service centers provide genuine replacement parts |
| Repairability | Repairable by certified watchmakers |
| General Information | Includes user manual and warranty card |
Frequently Asked Questions - Diver SEL02003W0 ORIENT
How do I set the time on my Orient Diver SEL02003W0?
To set the time, pull the crown out to the second position (when the second hand stops). Turn the crown clockwise or counterclockwise to adjust the hands. Push the crown back in and screw it down securely.
How do I set the date?
Pull the crown out to the first position. Turn it counterclockwise to set the date. Avoid changing the date between 9 PM and 3 AM to prevent damaging the movement.
Is this watch suitable for scuba diving?
Yes, the watch has a water resistance of 200 meters (20 ATM), making it suitable for professional scuba diving. Ensure the crown is screwed down and the watch is regularly serviced to maintain its sealing.
How do I wind the watch manually?
To manually wind the movement, unscrew the crown to the normal position (position 0) and rotate it clockwise about 20-30 times. The watch will then start running and can be set normally.
What type of crystal is used on the watch?
The watch is equipped with a mineral crystal, which offers good scratch resistance. Some models may use sapphire crystal depending on configuration.
How should I clean and maintain the watch?
Clean the watch with a soft, dry cloth. For deeper cleaning, use a soft brush and mild soapy water, then rinse with fresh water. Dry thoroughly. Avoid using solvents or steam cleaners.
Does the watch have a screw-down crown?
Yes, the Orient Diver SEL02003W0 features a screw-down crown that must be locked securely before any water exposure to ensure water resistance.
How long does the power reserve last?
The automatic movement has a power reserve of approximately 40 hours when fully wound. Actual duration may vary based on wearing conditions.
What should I do if the watch stops running?
If the watch stops, it may need manual winding. Unscrew the crown and wind it clockwise about 20-30 times. If it still doesn't run, seek service from an authorized Orient dealer.
Can I replace the bracelet with a NATO strap?
Yes, the watch has a standard lug width of 22 mm, allowing you to swap the steel bracelet for a NATO strap or any compatible strap. Use a spring bar tool to remove the bracelet.
User questions about Diver SEL02003W0 ORIENT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wristwatch in PDF format for free! Find your manual Diver SEL02003W0 - ORIENT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Diver SEL02003W0 by ORIENT.