ENRTR-104 - Router ENCORE - Free user manual and instructions
Find the device manual for free ENRTR-104 ENCORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | ENCORE |
| Model | ENRTR-104 |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Max Wireless Speed | 300 Mbps |
| Ethernet Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Antenna | 2 x External Fixed Omni Directional |
| Dimensions (W x D x H) | 200 x 150 x 30 mm |
| Weight | 0.3 kg |
| Power Supply | 12V DC, 1A |
| Power Consumption | 12 W max |
| Security | WEP, WPA/WPA2, WPA-PSK, WPA2-PSK |
| Firewall | NAT, SPI |
| DHCP Server | Yes |
| VPN Passthrough | PPTP, L2TP, IPSec |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Maintenance | Clean with a dry cloth; do not use liquids |
| Spare Parts & Repairability | No user-serviceable parts; contact support |
| User Manual | 41 pages, PDF available |
Frequently Asked Questions - ENRTR-104 ENCORE
How do I reset the ENRTR-104 router to factory defaults?
Locate the reset button on the back panel. Press and hold it for 10 seconds with a paperclip while the device is powered on. The power LED will blink, indicating a reset. All settings will be restored to factory defaults.
What is the default IP address for accessing the router's web interface?
The default IP address is 192.168.1.1. Enter it into your browser's address bar to access the configuration page. Default username and password are both admin (unless changed).
How can I change the Wi-Fi password?
Log into the router's web interface (192.168.1.1), go to Wireless Settings, and modify the Pre-Shared Key field. Click Save and allow the router to reboot if prompted.
Why is my internet not working after setup?
Check the WAN cable connection between the router and modem. Ensure the router's WAN port is used (usually different color). Verify that your ISP settings (PPPoE, static IP, etc.) are correct in the WAN Setup page.
Can I use the ENRTR-104 as a wireless repeater?
This model does not support repeater mode out of the box. However, you can configure it as a wireless bridge using Bridge Mode if available in advanced settings, or install third-party firmware like DD-WRT (check compatibility).
How to update the firmware?
Download the latest firmware from ENCORE support website. Then log into the router's interface, go to System Tools > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
What LEDs are on the front panel and what do they mean?
Typical LEDs: Power (solid on), WAN (blinking for activity), LAN 1-4 (solid when connected, blinking with traffic), WLAN (solid when wireless enabled). Refer to manual for exact indications.
The router gets hot. Is it normal?
Yes, some warmth is normal. Ensure ventilation slots are not blocked. If it becomes extremely hot or shuts down, move to a cooler location or reduce wireless load. This model has passive cooling.
How do I block certain websites or devices?
In the web interface, go to Access Restrictions or Parental Control. You can create rules to block specific URLs or limit internet access for devices by MAC address.
Is the ENRTR-104 compatible with gigabit internet?
No, this router supports only 10/100 Mbps Ethernet ports, so maximum wired speed is 100 Mbps. For gigabit internet, consider a model with gigabit ports. Wireless speed up to 300 Mbps is theoretical, actual throughput lower.
User questions about ENRTR-104 ENCORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual ENRTR-104 - ENCORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ENRTR-104 by ENCORE.